MONO SERRA PANREVERSO1224 Installation guide

Brand
MONO SERRA
Model
PANREVERSO1224
Type
Installation guide
Choose your pattern and draw a plan on a sheet
of paper. The plan will serve as a reference during
the installation of your panels.
First of all, draw a level line. This will allow to
properly start the installation process, even if your
wall is not perfectly straight. Don’t rely on the wall,
the level line is your starting point.
Apply construction adhesive to the back of your
first panel and align it with the level line. You
will then have to glue most of the other panels,
depending on the pattern you have chosen.
To secure the panel once it has been glued,
insert the strips in the grooves.
Nail into the strips at a 45 degree angle.
This will allow to camouflage the nail heads
and provide a smoother finish.
1
2
3
4
5
Installation Technique
Product specifications
10 per box of 3/8 inch x
12 inches x 24 inches
Box coverage of 20 ft
2
Easy to install - Reversible
2 sides melamine finish - Reversible
Endless design possibility !
Scan this code to access
the installation video
on walldesign.ca
walldesign.ca
Quick and easy to install! No need to devote your entire week-end! Reverso allows you to transform
your decor within a few hours and reveal the living or working environment of your dreams! Available
in boxes of 10 reversible panels in two different colours so you can create a multitude of designs!
The best way to see the other side of the decor !
Suggested Designs
Support Canadian
Products.
Save Canadian Jobs.
Sandalwood Contour White
  • Page 1 1

MONO SERRA PANREVERSO1224 Installation guide

Brand
MONO SERRA
Model
PANREVERSO1224
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents