Laserworld EL-500RGB KeyTex Owner's manual

Manual / Bedienungsanleitung / Mode d‘emploi

Ecoline Series

EL-500RGB KeyTEX

Please spend a few minutes to read this manual fully

before operating this laser!

Bitte lesen Sie diese Bedienungsanleitung sorgfältig

vor Inbetriebnahme dieses Showlasersystems!

Avant d’utiliser cet appareil pour la première fois nous vous recommandons

de lire cette notice d’utilisation!

02/2016

English

Deutsch

Français

Manual: Ecoline Series EL-500RGB KeyTEX

page 2 / 33

Rechtlicher Hinweis:

Die Firma Laserworld (Switzerland) AG behält sich das Recht vor, Änderungen an ihren Produk-

ten vorzunehmen, die der technischen Weiterentwicklung dienen. Diese Änderungen werden

nicht notwendigerweise in jedem Einzelfall dokumentiert. Diese Betriebsanleitung und die

darin enthaltenen Informationen wurden mit der gebotenen Sorgfalt zusammengestellt. Die

Firma Laserworld (Switzerland) AG übernimmt jedoch keine Gewähr für Druckfehler, andere

Fehler oder daraus entstehende Schäden. Die in dieser Bedienungsanleitung genannten Mar-

ken und Produktnamen sind Warenzeichen oder eingetragene Warenzeichen der jeweiligen

Titelhalter.

Legal notice:

Thank you for purchasing this Laserworld

product. Due to continual product developments and technical improvements, Laserworld

(Switzerland) AG reserves the right to make modications to its products. This manual and its

content have been made with due care but Laserworld (Switzerland) AG cannot however, take

any responsibility for any errors, omissions or any resulting damages forthwith. The brands

and product names mentioned in this manual are trade marks or registered trade marks of

their respective owners.

Information juridique :

L’entreprise Laserworld (Switzerland) AG se réserve le droit d’eectuer des modications con-

cernant leurs produits et ainsi de répondre au développement technique. Ces modications

ne seront pas nécessairement annoncées en tout cas spécique. Ce mode d’emploi et les in-

formations contenues dedans ont été établis avec le soin minutieux qui s’impose dans ce cas.

Laserworld (Switzerland) AG ne pourra pas être tenue responsable pour d’éventuelles erreurs

d’impression ou dommages en résultants.

En cas de doutes, veuillez toujours contacter Laserworld (Switzerland) AG . Les noms de

marques et de produits utilisés dans ce mode d’emploi sont des marques de fabrique ou des

marques déposées.

L’utilisation est réservée à un usage professionnel selon décret n°2007-665 du 2 mai

2007 relatif à la sécurité des appareils à laser sortant!

Article 4 bis :

« Les usages spéciques autorisés pour les appareils à laser sortant d’une classe supérieure à 2

sont les usages professionnels suivants :

(…)

9° Spectacle et achage :

Toutes les applications de trajectoire, de visualisation, de projection ou de reproduction

d’images en deux ou trois dimensions. »

Manual: Ecoline Series EL-500RGB KeyTEX

page 3 / 33

Content:

1. Product and package contents

2. Preliminary warning notices

3. Initial operations, safety instructions

4. Working on the device

5. Service notes

6. Warnings, device connections & setting options

7. Operation

Final statement

Technical data sheet

Laser specications

Manual: Ecoline Series EL-500RGB KeyTEX

page 4 / 33

1. Product and package contents

Please check if all listed parts are included and undamaged. Included in delivery:

1 x laser projector 1 x USB keyboard 1 x IR remote

1 x external PSU 1 x USB extension cable 1 x user manual

1 x Interlock connector 1 x key

3. Initial operations, safety instructions

1. Make sure to use correct voltage; see in-

formation on device & in this manual.

2. Make sure that the device is not connec-

ted to mains during installation.

3. Installation has to be done by technical

experienced and qualied persons ac-

cording to safety regulations of the res-

pective country.

4. Always ensure that maximum permis-

sible exposure (MPE) is not exceeded

in areas accessible to the public.

5. In some countries an additional ins-

pection by technical control institutes

could be necessary.

6. Connect an easily accessible inter-

lock connector or circuit breaker

to the projector.

7. The power supply should be easily acces-

sible.

8. If the device has been exposed to great

temperature changes, do not switch it

on immediately. Condensation (or any

moisture/water formed) may damage

device.

9. Never use dimmer, RC or other electroni-

cally switched sockets. Whenever possib-

le, do not use the laser projector together

with large appliances (especially fog ma-

chines) on the same mains!

10. Ensure sucient ventilation and do not

place the device on any warm or heat ra-

diating surface. Especially the ventilati-

on openings must not be covered!

2. Preliminary warning notices

1. Please use this device only according to these operating instructions.

2. Do not use the device if there are any visible damages on housing, connector panels,

power supplies or power cords.

3. Never look directly into the light source of a laser projector. Danger of damage to the

eyes or even blindness in extreme circumstances!

4. Do not operate the device at high humidity, in the rain or in dusty environments.

5. Protect device against dripping or splashing water. Do not place any liquid lled

containers near to this device.

Any warranty claims are void if the warranty label is removed or tampered

with in any way.

Manual: Ecoline Series EL-500RGB KeyTEX

page 5 / 33

11. Ensure that device does not get over-

heated. Make sure that the device is not

exposed to spotlights (especially moving

heads). Heat of spotlights could overheat

laser in a little while and leads to a degra-

dation of performance.

12. This unit is intended for indoor use only.

4. Working on the device

1. Be sure that the mains plug is not connected to the power supply

while installing.

2. Take o all reecting things like rings, watches etc. before

starting to work with or at the projector.

3. Only use non-reecting tools to work on device.

4. Wear protective clothing (like goggles, gloves etc.)

according to laser power and wavelength of the laser.

5. Service notes

• Moisture and heat can reduce lifetime of

the laser system dramatically and expires

any warranty claim.

• Quick on/o switching of this device will

reduce durability of the laser source dra-

matically.

• Avoid sharp knocks and shocks to this

device and ensure sucient protection

during transportation. Look after your La-

serworld product.

• To increase durability of your laser,

protect device against overheating:

- Always ensure sucient ventilation.

- Do not face spotlights (especially mo-

ving heads) to the device.

- Check temperature after approx. 30

minutes with each new installation.

If necessary install the projector at a

place with dierent temperature.

- Keep the device dry. Protect it from

moisture, rain and damp.

- Switch o device when it is not nee-

ded. Laser sources are switched on

and can wear out even if there is no

visible laser output.

• The devices of Ecoline, Evolution, Club

and Proline Series are not meant for pro-

fessional applications. After approx. one

hour of operation, the device should cool

down for about 15 minutes.

• Please ensure the fans and heatsinks are

clear from dust and debris otherwise the

risk of overheating may occur. If the unit

and airways appear to be blocked then

please contact a qualied service engi-

neer to maintain and service the product.

• Removal of the warranty label as well

as damages to the device caused by

improper handling, neglect of the sa-

fety instructions and service notes will

void the warranty.

Manual: Ecoline Series EL-500RGB KeyTEX

page 6 / 33

6. Warnings, device connections & setting options

Emission LED

Microphone

Power in

Interlock

Mode Button

Adjust Pattern

Size

Key Switch

Grating option

Laser Aperture

Keyboard

Interface

Fan

IR Receiver

Laser radiation!

Avoid exposure

to beam

Caution of ra-

diation if cover

is removed

Power supply

& consumption

Model type

Wavelength

Output power

Production year

Use in enclosed spaces only!

Laser class 3b

Warnings and other notices on the device

DMX IN

Interface

DMX IN

Interface

Please loosen the

screws at the top

of the laser device

to slide in / out the

defraction grating.

Tighten the screws

again to fasten the

eect.

Manual: Ecoline Series EL-500RGB KeyTEX

page 7 / 33

7. Operation

7.1 Power supply

Connect your EL-500RGB KeyTEX with the external PSU and connect it to the mains. Please

make sure that you are using the correct voltage. False voltages could destroy the device. Ple-

ase use the voltage specied at the end of this manual. Don‘t focus the front of the laser on

people while installation.

7.2 Switch on / o

Insert the key into the key switch on the back side of the laser and switch to “On“ to switch

the device on or to “O“ to switch the device o. Please disconnect the device from the power

supply if you don‘t need it for a longer period.

7.3 Modes

Access the four dierent operating modes available in this product by using the MODE button

on the front panel. Pressing and holding the MODE button for 2.5 seconds will turn the pro-

duct on or o. Press MODE to cycle through the modes. Please see a description of each mode

below.

Mode Description

Auto Built-in auto programs

Scene Pattern selection

Music Music mode

Clock Clock mode

Text Text mode

DMX DMX mode

7.4 IR remote controller

Cycles through auto pro-

grams

Sound-active mode

Pattern selection

ON / OFF button

Mirror eect

Pauses the eect

Clock mode

Text mode

Numeric keys

Manual: Ecoline Series EL-500RGB KeyTEX

page 8 / 33

Button Function / Button Description

ON / OFF button Turns laser on/o

Auto mode Laser runs in auto mode. Red LED indicator lights. Press the number

buttons to get dierent design patterns

Sound-active mode Sound-active mode. Blue LED indicator ashes when sound is

detected. Sound-active mode displays the same design packs as

auto mode, but respnds to sounds. Press and hold to enable sound

sensitivity adjustment. Use 1 (least sensitive) to 9 (most sensitive)

Pause Pauses the program. Press again to continue the program

Pattern selection Press button to enter the pattern selection and select one of the

available patterns by pressing the number buttons

Text mode Press to enter the text mode, then press any numbered button.

Enter text using the keyboard. Red and blue LED indicator lights.

Clock mode Press numbers on the number pad to set the time and press ‚SPACE‘

to start the clock function

Numbers Press to select a number

Previous / Next Press to go to a previous / next step

Mirror Press and hold to mirror the laser projection. Press repeatedly for

up to 4 mirrored options

7.5 Using the Keyboard

Use the keyboard to access menu options, select laser patterns, and enter dierent modes. To

use the keyboad with the laser, do the following:

1. Connect the USB cable of the keyboard to the USB interface on the back of the laser

projector.

2. Connect the laser to the mains.

Menu Options

To select the menu options using the keyboard, do the following:

1. Press

to access the menu options. The laser output displays the current menu option.

2. Use

to scroll through the menu options: 1. AUTO, 2. SCENE, 3. MUSIC, 4. CLOCK, 5.

TEXT and 6. DMX.

3. Press

to conrm the selection.

to

Manual: Ecoline Series EL-500RGB KeyTEX

page 9 / 33

Text Mode

Press

to select the mode and press ‚ENTER‘ to activate the mode. When text mode is active,

use the following keys on the keyboard to enter text and select patterns:

Function Key Description

Flow Sets the text ow. Press again to restart

RGB Color RGB Sets the text in dierent color variations.

Draw

Selects the drawing functionality. Use up and down arrows to

set the speed.

Zoom

Selects the zoom in, zoom out, and zoom in/out functionality.

Use the up and down arrows to set the speed.

X Move

Text moves to the right or to the left. Use the up and down

arrows to set the speed.

Y Move

Text moves up or down. Use the up and down arrows to set the

speed.

Y Roll Text curves around the y-axis. Use the up and down arrows to

set the speed.

X Roll

Text curves around the x-axis. Use the up and down arrows to

set the speed.

Z Roll

Text spins around the z-axis. Use the up and down arrows to set

the speed.

Wave

Text is projected with a wave eect. Use the up and down

arrows to set the speed.

Text Qty Displays characters in quantities of 4, 6, 8, 10, or 12 (incl. free

space)

Play Time Sets the display time.

Mirror

Mirrors the display in 4 directions

Delete

Clears the cache.

Backspace Deletes a character to the left

Home Moves the cursor to the beginning of the text.

End Moves the cursor to the end of the text.

Arrow Keys

Moves the cursor up, down, to the left or to the right.

Manual: Ecoline Series EL-500RGB KeyTEX

page 10 / 33

Function Key Description

Ctrl + Alt + Del Deletes the entire text.

Save + No. Saves the text and pattern.

Play + No.

Plays back the saved text and pattern.

Loop Playback

Repeats the saved text and pattern.

Page up

Chooses the last edited text.

Page down

Chooses the next edited text.

Pause

Pauses the program

Auto Mode

Press

to select the mode and press ‚ENTER‘ to activate the mode. When auto mode is acti-

ve, use the following keys on the keyboard:

Function Key Description

Numbers Press 1 - 9 to select one of the auto programs. Press 0 to select

all auto programs in a loop.

Mirror Mirrors the display in 4 directions.

Music Mode

Press

to select the mode and press ‚ENTER‘ to activate the mode. When music mode is

active, use the following keys on the keyboard:

Function Key Description

Numbers Press ‚ENTER‘ and choose on of the numbers 1 - 9 to select the

sensitivity of the microphone. Press ‚ENTER‘ to conrm.

Mirror Mirrors the display in 4 directions.

Pattern Selection (Scene)

Press

to select the mode and press ‚ENTER‘ to activate the mode. When pattern mode is

active, use the following keys on the keyboard:

Function Key Description

Numbers Press the number buttons to select one of the available pat-

terns.

Manual: Ecoline Series EL-500RGB KeyTEX

page 11 / 33

Channel Value Function

1 - modes 0 - 49 laser o

50 - 149 automatic mode

150 - 199 sound mode

200 - 249 text mode

250 - 255 static DMX mode (patterns)

Attention! The following channel only works if text mode in Channel 1 is active (value 200 - 249)!

2 - text mode 0 - 19 zoom in / out

20 - 39 static text

40 - 59 wave

60 - 79 text drawing

80 - 99 zoom out

100 - 119 x-axis movement

120 - 139 y-axis movement

140 - 159 y-axis rotation

160 - 179 x-axis rotation

180 - 255 z-axis rotation

Attention! The following channels only work if static DMX mode in Channel 1 is active (value 250 - 255)!

2 & 3 - pattern selection 0 - 255 patterns selection

4 0 - 209 colors selection

210 - 255 pattern ashes with speed selection

5 0 - 255 pattern drawing with speed selection

6 0 - 255 zoom in with speed selection

7 0 - 255 y-axis rotation with manual speed selection

8 0 - 255 x-axis rotation with manual speed selection

9 0 - 255 z-axis rotation with manual speed selection

10 0 - 255 x-axis movement with manual speed selection

11 0 - 255 y-axis movement with manual speed selection

12 0 - 255 stretch eect

Please note that not each pattern can be combined with each eect!

DMX Mode

Press

to select the mode and press ‚ENTER‘ to activate the mode. When DMX mode is acti-

ve, use the following keys on the keyboard:

Manual: Ecoline Series EL-500RGB KeyTEX

page 12 / 33

Final statement

Laserworld products are tested and product packaging is inspected before leaving our

warehouse.

Users must to follow the local safety regulations and warnings within this manual and adhere

to any regulations within its place of use. Damages through inappropriate use will void any

liability or warranty of our products.

Due to continual product developments, please check for the latest update of this product

manual at www.laserworld.com. If you do have any further questions, then please contact

your dealer/place of purchase or use our contact section on our website.

For service issues, please contact your dealer/place of purchase and ensure only genuine

Laserworld spare parts are used in any service repairs.

Errors and Omissions excepted and products are subject to change.

Laserworld (Switzerland) AG

Kreuzlingerstrasse 5

8574 Lengwil

SWITZERLAND

Registered oce:

8574 Lengwil / Switzerland

Company number: CH-440.3.020.548-6

Commercial Registry Kanton Thurgau

CEO: Martin Werner

VAT no. (Switzerland): 683 180

UID (Switzerland): CHE-113.954.889

VAT no. (Germany): DE258030001

WEEE-Reg.-No. (Germany): DE 90759352

www.laserworld.com

[email protected]

representative according to EMVG:

Ray Technologies GmbH

Managing Director: Karl-Heinz Käs

Mühlbachweg 2

83626 Valley / Germany

Page is loading ...

Manual: Ecoline Series EL-500RGB KeyTEX

page 33 / 33

Technical data / Technische Daten / caractéristiques techniques

Laser sources:

Laserquellen:

Sources laser:

Diodes, DPSS

Laser class:

Laserklasse:

Classe laser

3b

Scanner: 15kpps

Scan angle:

Strahlauslenkung:

Angle de scan max.:

+/- 20° & ca. 90° defraction grating

Operation modes:

Betriebsmodi:

Mode de fonctionnement:

DMX, text, auto, music

Beam: ca. 3mm / 1.5mrad

Power supply:

Stromversorgung:

Alimentation:

PSU: 100-240V / AC; 50/60Hz

unit: 12V DC

Power consumption:

Stromaufnahme:

Consommation:

10W

Operating temperature:

Betriebstemperatur:

température d‘opération:

+10° to +35°C

Dimensions:

Abmessungen:

210 x 165 x 85 mm

Weight:

Gewicht:

Poids:

1.64 kg

guaranteed -

typical

*

Red / Rot /

Rouge

*

(650nm)

Green / Grün /

Vert

*

(532nm)

Blue / Blau /

Bleu

*

(445nm)

EL-500RGB

KeyTEX

400mW-490mW 180mW 80mW 160mW

*Due to Advanced Optical Correction technology used in our laser systems the optical power of each colour within installed laser module(s)

may slightly dier from the specication of respective laser module(s).

* Aufgrund fortschrittlicher Technologien zur optischen Korrektur, die in unseren Lasersystemen zum Einsatz kommen, kann es sein, dass

die Ausgangsleistung der Module je Einzelfarbe leichte Abweichungen zu den Leistungsangaben für das entsprechende Modul aufweisen.

* En raison de diérentes technologies avancées de correction d‘optiques utilisées dans nos systèmes, les puissances en sortie des modules

peuvent légèrement diérer des puissances annoncées pour le module correspondant.

Power specications (at laser module) /

Laserleistung (am Modul) / Puissance

Laserworld EL-500RGB KeyTex Owner's manual

This manual is also suitable for

Laserworld EL-500RGB KeyTex Owner's manual

in other languages

Related papers

Other documents