PENTOUCH TV FAQ
over 30 cm away
Home
Touch
50cm
within 30 cm
Dongle
Home
Touch
Supported Operating System
Windows XP 32 bit
Windows Vista: 32 bit, 64 bit
Windows 7 : 32 bit, 64 bit
(Windows 7 Starter Edition is not
supported.)
Recommended System Requirements for Using Pentouch TV
Frequently Asked Questions
Touchpen is Not Working
Using the Pentouch
Function
CPU : Dual-Core 2GHz or better
Memory : 1 GB or more
HDD : 500 MB or more
Display : Graphic card with 1024 x 768 via an RGB or HDMI output port
Windows 7 is recommended due to its support of multi-touch.
Touchpen Pairing is Not Working
Screen is Not Working
How to Charge Touchpen Battery
See this section in OWNER’S MANUAL
Pairing between
Touch Pen and Dongle
See this section in OWNER’S MANUAL
Display Resolution
Settings for Pentouch
See this section in OWNER’S MANUAL
Pairing between
Touch Pen and Dongle
See this section in OWNER’S MANUAL
2. Select PC
[Cradle] [TouchPen] [Cradle & TouchPen]
Charging
USB
port
USB
port
USB
port
USB
port
USB
port
USB
port
USB
port
USB
port
PENTOUCH TV SET-UP GUIDE
3. Restart your computer 4. Check the LED on the Dongle
1. Preparing
RGB or HDMI
USB dongle
Pentouch TV
PC Touch Pen, CradleCD
2. Insert the CD
7. Press the Pentouch mode
1.Press “SETTINGS” button
2.Select PC
8. Start the Pentouch program 9. Enjoy Pentouch TV
6. Display Resolution Setting
Color quality
Screen resolution
“Fn+switch screen”
Display resolution to
1024 x 768
LG
Fn+F7 Fn+F4 Fn+F5 Fn+F5
Fn+F7 Fn+F5 Fn+F8 Fn+F7
HP
Samsung
Toshiba
Sony DellAcer
Lenovo
※
Laptop
※
Desktop
P/NO : MBM63477005 (1202-REV00)
Printed in Korea
● Image shown may differ from your TV.
Connect TV and PC with RGB or HDMI
SETTINGS
SETTINGS
Home
Touch
Home
Touch
5. Pen Pairing
50cm
within 30 cm
Red on
(2 seconds)
Green blinks
(3 times)
Home
Touch
Home
Touch
Home
Touch
Home
Touch
1.Press “SETTINGS” button
SETTINGS
SETTINGS
※
Refer to steps 6 through 8
on the previous page
SETTINGS
SETTINGS
Did you
forget?
Home
Touch
Home
Touch
Home
Touch
Home
Touch
Home
Touch
Home
Touch
Stand-by
-
1
