2. Panasonic
  3. Arbitrator 360
Arbitrator 360

Panasonic Arbitrator 360 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Panasonic Arbitrator 360 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Arbitrator Hardware
Installation
Arbitrator SI Unit and Cables
Camera Cable
(Short)
Power Cable
for P2 recorder
External GPIO
Trigger Cable
USB Extension
Cable
GPS Antenna
Camera
AG-CK10P
AG-CR12P
TDSS-900-PNA
Digital Wireless
Mic Reciever &
Transmitter
In Car Mic
Receiver Cable
AG-CPD15P
P2 recorder (VPU)
AJ-P2C016RG
16GB P2 Card
Camera Mount Camera Cable
(Long)
Control Panel
Cable
Control Panel
OPTIONS
2
nd
Rear Camera
CN258IR-P
USB/LAN Adaptor
(including a driver CD)
LAN Cable
(Crossing type)
AG-RCP30P
GPS Antenna
Car Battery
12V/24V
2
nd
Rear Camera (Option)
CN258IR-P
8 Trigger Inputs
(Siren/Light
Bar/Brake/WMIC etc)
In car Camera
2
nd
WMIC Receiver/
Transmitter (Option)
P2 Recorder (Rear)
AG-CPD15P
*USB Thumb Drive needs to be provided by 3
rd
vender
Toughbook
(In car PC)
Control Panel
Arbitrator SI System Configuration
Power Cable
GPIO Trigger CableCamera Cable
LAN Cable
USB/LAN
Adaptor
Control Panel Cable
Digital RX/TX
OPTION:
AG-RCP30P
AG-CK10P
USB Thumb
Drive*
AG-CR12P
Front End
Application (SI)
In car mic
Digital WMIC RX/TX
TDSS-900-PNA
USB Extension Cable
Recording engine
Clock
P2 Recorder
power
power
signal(SA)
■
■
■
P2 Recorder, Wireless MIC to Battery Connection (w/ VPU timer)
Ignition etc.
RED
WHITE
Receiver (RX) Cable
Car Battery
12V/24V
WMIC Receiver (RX)
BLACK to
Battery-
WHITE
RED
RED
BLACK to
Battery-
1A fuse is included
In RX Cable
Fuse
5A
Fuse
5A
(+)
(-)
“RED” cable : Connect via 5A fuse (Not included in Arbitrator kit) to Battery (+)
“WHITE” cable : Connect via 5A fuse (Not included in Arbitrator kit) to ACC line or switch.
Don’t connect to Battery (+)
“BLACK” cable: Connect to Battery ( - )
Recording engine
Clock
P2 Recorder
power
power
signal(SA)
■
■
■
P2 Recorder, Wireless MIC to Battery Connection (w/ Charge Guard)
RED
WHITE
Receiver (RX) Cable
Charge
Guard
Car Battery
12V/24V
WMIC Receiver (RX)
BLACK to
Battery-
WHITE
RED
RED
BLACK to
Battery-
1A fuse is included
In RX Cable
Fuse
5A
Fuse
5A
(+)
(-)
“RED” cable : Connect via 5A fuse (Not included in Arbitrator kit) to Battery (+)
“WHITE” cable : Connect via 5A fuse (Not included in Arbitrator kit) to ACC line or to the
Charge Guard. Don’t connect to Battery (+)
“BLACK” cable: Connect to Battery ( - )
AG-CR12P
Cables for P2 Recorder
Power Cable
for P2 recorder
External GPIO
Trigger Cable
USB
Extension Cable
GPIO/Serial Connector
RS-232C
GPIO Trigger Cable
Network Cables(AG-CR11P), Control Panel Cable, Camera Cable
Control Panel
Cable
(included in AG-RCP30P)
Camera Cable
(included in AG-CK10P)
USB/LAN Adaptor
(including a driver CD)
LAN Cable
(Crossover type)
Black:
Connect to the
Connect to the
NEGATIVE
NEGATIVE
(
(
-
-
) terminal of the battery
) terminal of the battery
RS-232C: Connect to equipment with serial connectors
Black (GND: - ): Connect to the negative ( - ) terminal of
the battery
Red (BATT: +): Connect via a 5A fuse to a power supply
that is constantly on, regardless of ignition key ON/OFF status
White (SIGNAL) : Connect the signal line via 5A fuse
to the ACC line or to the output terminal of a timer box
Power Cable
External GPIO Trigger Cable/Power Cable Connection
P2 Recorder
(Rear)
External GPIO
Trigger Cable
Others: Input signal lines
White: REC Tally output line
Gray: Input signal or Speed pulse signal
External GPIO Trigger
External GPIO Trigger Cable
(supplied)
*GPIO for Wireless Mic, Light bar, Siren etc.. as above example.
*Serial (RS-232C, Pin number either of 2-8 & 20) for Rader Gun etc
For Low Voltage Output only (LED or Relay)WhiteOutGPIO925
Speed Sensor with pulse table setting onlyGrayInGPIO824
OtherPurpleInGPIO723
OtherBlueInGPIO622
Gun LockGreenInGPIO521
Siren IndicatorYellowInGPIO413
Brake IndicatorOrangeInGPIO312
Light BarRedInGPIO211
Wireless MicBrownInGPIO110
Black MUST be grounded (To ground at Negative battery terminal)BlackGPIOGND9
Trigger Name (Example)Cable ColorRemarkSignalPin #
See “Cable Color” as below chart
2
nd
Wireless Mic
Receiver (optional)
P2 Recorder
(Rear)
Digital Wireless Mic Receiver Connection
To
Audio In 2
To
In Car Mic
To
Audio In 1
(RCA PIN)
Car Battery
12V/24V
Digital Wireless Mic
Receiver & Transmitter
Receiver (RX)
To
Receiver
Jack
RX Cable Power (RED)
To Battery via Timer Box
RX Cable Power GND (Black)
To Battery (-)
RX Cable Trigger REC (Yellow)
To either of GPIO 1 to 8
(Ex. GPIO1 Brown)
RX Cable GND (Black)
To Battery(-)
External GPIO
Trigger Cable
Receiver (RX)
Cable
In Car Mic
2
nd
Rear Camera (Option:CN258IR-P) Connection
P2 Recorder
(Rear)
Car Battery
12V/24V
White to Battery (+)
via Timer Box
Black to Battery (-)
Yellow to Camera 2
2
nd
Camera
(Front)
2
nd
Camera
Cable
Control Panel (Option: AG-RCP30P) Connection
Control Panel
P2 Recorder (Rear)
Control Panel Cable
To
Control Panel
LCD
Screen
Auto
Zoom
Book
Mark
Backlight
Compensation
T: Zoom In
W: Zoom Out
REC/STOP
Lamp
REC
Button
STOP
Button
Audio 2 Mute
Button/Lamp
Mute Audio 2 and lamp lights
on by pushing this button.
No recording while muting
(lights on)
IR Mode
(Auto/ON/OFF)
Volume
Control
Brightness
Control
Control Panel
ON/OFF
Live/Archive
Switching Button
Skip
(Back/Forward)
Return
To go back to previous
menu or setting
Cursor Button
1) Lock Lamp
Lock except “REC”, “Menu”,
“Control Panel ON/OFF”,
“Return” Button while lights on
2) Ready Lamp
3) Busy Lamp
Camera
Select
(Camera1/2))
Menu
Control Panel (Option: AG-RCP30P) Buttons
<How to format by SI?>
• Insert new 16GB P2 cards to P2 Recorder (VPU)
• Go to “Config” by SI menu and select “Operations”.
Press “Format” and then select “Yes”
(c)
Press “Format” and select “Yes”.
Then, “Format finished successfully” message
will be appeared when the format is completed.
Before use, Format 16G P2 card by SI
Formatting 16G P2 card is mandatory at the first time usage.
When modified (copy, delete, move etc) folders in P2 Card, please format the card.
(If you copy the folders/files from 5 slot P2 drive or PC PCMCIA to PC HDD, please format the card.)
The format of 16G P2 card is available by Control Panel, 5 slot P2 drive and PC PCMCIA slot.
Note that 16GB P2 card limit the number of files that can be recorded per below chart.
340 files
With Bookmark
# of maximum recording files per day
508 files
Without Bookmark
62 days
# of
recording days
Before use, Format 16G P2 card by Control Panel
(Option: AG-RCP30P)
[Setup/Info]
[Admin] Page 2/2
<How to format 16GB P2 card by Control Panel?>
• Insert new 16GB P2 cards to P2 Recorder (VPU)
• By Control Panel Menu, go to “Setup/Info”, “Admin (page 2/2)”, “File Management” and select “Format”
• Press “Format” when “Format all P2 cards!!!” message is appeared.
Then, you will see “All cards are formatted” message when the format is completed.
[Top Menu]
[File Management]
Formatting 16G P2 card is mandatory at the first time usage.
When modified (copy, delete, move etc) folders in P2 Card, please format the card.
(If you copy the folders/files from 5 slot P2 drive or PC PCMCIA to PC HDD, please format the card.)
The format of 16G P2 card is available by Control Panel, 5 slot P2 drive and PC PCMCIA slot.
Note that 16GB P2 card limit the number of files that can be recorded per below chart.
340 files
With Bookmark
# of maximum recording files per day
508 files
Without Bookmark
62 days
# of
recording days
Select the removable disc drive in PC that inserted P2 card. Right click
on that drive and select “format”
5 slot P2 Drive
(AJ-PCD20P)
Press “Format P2C” button on the unitP2 Store
（
（（
（AJ-PCS060G)
By Control Panel Menu, go to “Setup Info”-”Admin”-”File Management”-
”Format”
Control Panel
Select the removable disc drive in PC that inserted P2 card. Right click
on that drive and select “format”
By SI Menu, go to “Config”-”Operations”-”Format”.
How to format?
PC PCMCIA slot
(Windows)
SI
(FE Application)
Format by
16GB P2 Card Format by Products /
Combination with Windows version
NNYY
5 slot P2 Drive (AJ-PCD20P)
though IEEE1394
NYYY
5 slot P2 Drive (AJ-PCD20P)
through USB
Y
N
2000
Pro SP4 + Hot Fix
N
N
Server
2003
Y
Y
XP
Pro SP2
Y
Y
Vista
P2 Store (AJ-PCS060G)
through USB
PCMCIA slot (Card Bus) in PC
For the users who need Win2000 SP4+Hot Fix, please contact 1-800-LAPTOP5 (1-800-527-8675) to obtain the copy of the file.
Appendix
External GPIO Trigger (External LED)
If the officer would like to see the REC status from inside of car
additionally, it is possible to set up the LED light connecting to
GPIO.
Siren Detector Cable (Option)
Siren Detector Cable (Option)
Specification:
Contact Information:
LIND Electronics
www.lindelectronics.com
Toll Free 1-800-659-5956
/