Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG50.07B Rev. 05/10
Catalog Specification Sheet No.
EG50.07B
Dishtable Accessories
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
Dishtable Accessories
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
Certifications / Approvals
shipping wt.
model # lbs. kg
301630 15 6.8
shipping wt.
model # lbs. kg
301124 4 1.8
shipping wt.
model # lbs. kg
SCRAP TROUGH 13 5.8
model # description
300719 splash-mounted spray unit
300718 deck-mounted spray unit
301189 faucet add-on with 12˝ (305mm) spout
301190 wall bracket
model # description
313295 deck-mounted spray unit with wall bracket
313297 faucet add-on with 12˝ (305mm) spout
model # description
316743 stainless steel gussets
model # description
300692 stainless steel
301036 white metal
300293 plastic
Rack Slide
• 16 gauge construction.
Scrap Basket
• This model features all-16 gauge stainless steel
construction.
• Tabs provide proper height
and basket drainage.
Prerinse Basket with Slide Bar
• An all-in-one combination.
• Type 304 construction throughout.
Drain Trough
• 5˝ (127mm) wide and 2˝ (51mm) deep
with a 1
1
⁄2˝ (38mm) center drain opening.
• Removable basket with handles.
• All-stainless steel construction.
scrap trough
Prerinse Units…
• Temperature adjustment for hot water
with preset cold water adjustment for
anti-scald protection.
…T&S Extra Heavy Duty Prerinse Components
• Top-of-the-line.
width x length x height shipping wt.
model # in. mm lbs. kg
606434 17
1
⁄2˝ x 19
1
⁄2˝ x 2˝ 445 x 493 x 51 3 1.4
Stainless Steel Gussets
• Optional only for 16 gauge tables.
• Standard on SPEC-MASTER
®
tables.
gusset
Bullet Feet
With a full 1˝ (25mm) adjustment.
…Standard Prerinse Components
Dishtable Undershelves
• Provides extra space for rack
storage and operations
equipment.
• 24
1
⁄8˝ (612mm) wide.
NOTE: Order one size smaller than dishtable.
shipping
Galvanized 400 Series 300 Series length weight
model # model # model # in. mm lbs. kg
605371 605374 605379 24˝ 610 10 4.5
605372 605375 605380 36˝ 914 15 6.8
605373 605376 605381 48˝ 1219 20 9.0
MODELS:
300*
301*
305428
311722
313*
316660
316743
351585
605*
606434
DTRA-24
DVS-*
HDC*
SCRAP
TROUGH
* See charts for full model numbers.
See Spec Sheet #EG50.06 for optional
Dishtable Racks.
See Spec Sheet #EG50.12 for optional LIFESTOR
®
Polymer Undershelf for
Dishtables.
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Catalog Specification Sheet No.
Dishtable Accessories
Rev. 05/10
Printed in U.S.A.
©2010 by Eagle Group
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
EG50.07B
corner dishtable with optional PVC rollers
Sink Covers
• 18 gauge stainless steel with
holes provided for handling.
PVC Rollers
• 2˝ (51mm) diameter.
• Free-wheel.
• For 14/304 dishtables only.
• For ease of sliding racks.
• For stainless steel rollers,
contact factory.
Three rollers required for every 12˝ (305mm). Example: For a 6´ (1829mm)
table, at the required three per foot: 6´ table x 3 per foot = 18 rollers needed.
Standard only on SPEC-MASTER
®
series
dishtables.
See Spec Sheet #EG50.07A for Dishtable Modifications.
model # description
311772 crossbrace assembly
316660 crossbrace assembly for undercounter dishtables
300765 single leg for undershelf
width x length shipping wt.
model # in. mm lbs. kg
305428 20˝ x 20˝ 508 x 508 11 5.0
351585 16˝ x 20˝ 406 x 508 10 4.5
length shipping wt.
model # in. mm lbs. kg
DTRA-24 24˝ 610 3 1.4
Legs and Crossbrace Assemblies
• Stainless steel welded construction.
model # description
300720 1
1
⁄2˝ or 2˝ (38 or 51mm) NPS connection
300721 2˝ (51mm) NPS connection
Lever Drains
model # description
313832 brass, for
1
⁄2˝ pipe size
Anti-Siphon Breaker
outer width x length x height * weight
model # in. mm lbs. kg
DVS-48 4˝ x 16˝ x 48˝ 102 x 406 x 1219 60 27.2
DVS-60 4˝ x 16˝ x 60˝ 102 x 406 x 1524 75 34.0
DVS-72 4˝ x 16˝ x 72˝ 102 x 406 x 1829 90 40.8
* If you have other size requirements, please call the factory.
width x length x height* weight
model # in. mm lbs. kg
HDC3636 36˝ x 36˝ x 20˝ 914 x 914 x 508 105 47.6
HDC3642 36˝ x 42˝ x 20˝ 914 x 1067 x 508 115 52.2
HDC3648 36˝ x 48˝ x 20˝ 914 x 1219 x 508 125 56.7
HDC4242 42˝ x 42˝ x 20˝ 1067 x 1067 x 508 135 61.2
HDC4848 48˝ x 48˝ x 20˝ 1219 x 1219 x 508 150 68.0
* If you have other size requirements, please call the factory.
Dishwasher Condensate Vents,
DVS Series
• Mounts to dishwasher end vents.
• Seams are continuously liquid-tight.
• 18 gauge type 304 stainless steel.
NFPA-96
Dishwasher Condensate and Type II Hoods, HDC Series
( )
for TYPE II
• 12˝ x 12˝ (305 x 305mm)
collar opening for exhaust
connection.
• Type 304 stainless steel
construction.
• Full perimeter gutter and
drain tube located on the left.
For Type II applications, optional baffles are required. To order, add suffix “S”
to model number (example: HDC3636S).
Dishtable Accessories
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Eagle Group DVS-60 Datasheet
-
Eagle Group CG-I-48 Datasheet
-
-
-
-
-
-
-
-
