Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Catalog Specification Sheet No.
Dishtable Accessories
Rev. 05/10
Printed in U.S.A.
©2010 by Eagle Group
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
EG50.07B
corner dishtable with optional PVC rollers
Sink Covers
• 18 gauge stainless steel with
holes provided for handling.
PVC Rollers
• 2˝ (51mm) diameter.
• Free-wheel.
• For 14/304 dishtables only.
• For ease of sliding racks.
• For stainless steel rollers,
contact factory.
Three rollers required for every 12˝ (305mm). Example: For a 6´ (1829mm)
table, at the required three per foot: 6´ table x 3 per foot = 18 rollers needed.
Standard only on SPEC-MASTER
®
series
dishtables.
See Spec Sheet #EG50.07A for Dishtable Modifications.
model # description
311772 crossbrace assembly
316660 crossbrace assembly for undercounter dishtables
300765 single leg for undershelf
width x length shipping wt.
model # in. mm lbs. kg
305428 20˝ x 20˝ 508 x 508 11 5.0
351585 16˝ x 20˝ 406 x 508 10 4.5
length shipping wt.
model # in. mm lbs. kg
DTRA-24 24˝ 610 3 1.4
Legs and Crossbrace Assemblies
• Stainless steel welded construction.
model # description
300720 1
1
⁄2˝ or 2˝ (38 or 51mm) NPS connection
300721 2˝ (51mm) NPS connection
Lever Drains
model # description
313832 brass, for
1
⁄2˝ pipe size
Anti-Siphon Breaker
outer width x length x height * weight
model # in. mm lbs. kg
DVS-48 4˝ x 16˝ x 48˝ 102 x 406 x 1219 60 27.2
DVS-60 4˝ x 16˝ x 60˝ 102 x 406 x 1524 75 34.0
DVS-72 4˝ x 16˝ x 72˝ 102 x 406 x 1829 90 40.8
* If you have other size requirements, please call the factory.
width x length x height* weight
model # in. mm lbs. kg
HDC3636 36˝ x 36˝ x 20˝ 914 x 914 x 508 105 47.6
HDC3642 36˝ x 42˝ x 20˝ 914 x 1067 x 508 115 52.2
HDC3648 36˝ x 48˝ x 20˝ 914 x 1219 x 508 125 56.7
HDC4242 42˝ x 42˝ x 20˝ 1067 x 1067 x 508 135 61.2
HDC4848 48˝ x 48˝ x 20˝ 1219 x 1219 x 508 150 68.0
* If you have other size requirements, please call the factory.
Dishwasher Condensate Vents,
DVS Series
• Mounts to dishwasher end vents.
• Seams are continuously liquid-tight.
• 18 gauge type 304 stainless steel.
NFPA-96
Dishwasher Condensate and Type II Hoods, HDC Series
( )
for TYPE II
• 12˝ x 12˝ (305 x 305mm)
collar opening for exhaust
connection.
• Type 304 stainless steel
construction.
• Full perimeter gutter and
drain tube located on the left.
For Type II applications, optional baffles are required. To order, add suffix “S”
to model number (example: HDC3636S).
Dishtable Accessories
