Draper Pump Action Brake Bleeder

Draper Pump Action Brake Bleeder is a manual pressure brake bleeder designed for use with most brake master cylinder reservoirs. It features a 2-liter fluid container, a hand pump, a pressure gauge, a pressure release valve, and a brake bleeder adaptor with a quick connector. The bleeder allows you to bleed your brakes without the need for a second person to operate the brake pedal. It is easy to use and can be used on most vehicles. To use the bleeder, simply fill the fluid container with new brake fluid, attach the brake bleeder adaptor to the brake reservoir, and pump the hand pump until the desired pressure is reached. Then, open the bleed screw on the brake caliper or wheel cylinder and allow the old brake fluid to drain out. The bleeder will automatically top up the fluid in the reservoir as needed.