Halo Pocket Power 6000 Operating Instructions Manual

Brand: Halo

Model: Pocket Power 6000

Category: Power banks

Type: Operating Instructions Manual

Halo Pocket Power 6000 is a compact and stylish portable charger with a powerful 6000mAh battery capacity. It's equipped with an anti-slip patch that can stick to your phone or case, making it easy to charge your devices on the go. The Halo Pocket Power 6000 has multiple output ports, including USB Type-C, USB Type-A, and Lightning, allowing you to charge a wide range of devices.

HALO POCKET POWER 6000

Thank you for choosing the HALO Pocket Power! Innovative,

fashionable and easy to use, the HALO Pocket Power 6000 provides a

compact yet powerful charging solution for your smartphone, tablet

and other USB devices. The HALO Pocket Power 6000 is equipped with

an anti-slip patch which can stick to any phone, phone case, or other

electronic device. This portable charging solution ts easily into a bag

or pocket making it perfect anywhere you go.

Please read the operating instructions carefully before using the

HALO POCKET POWER 6000.

INCLUDED ITEMS

• HALO POCKET POWER 6000

• Micro USB Cable

• Lightning Cable

• USB Type C Cable

OPERATING INSTRUCTIONS

CHARGING YOUR HALO POCKET POWER 6000

IMPORTANT: Before using your HALO Pocket Power 6000 for

the rst time, fully charge it (so that pressing the Power ON/OFF

button lights all four battery indicators).

To charge your HALO Pocket Power 6000, use the supplied USB Type C

cable to connect the USB Type C input on the Pocket Power 6000 to a

power source with a standard USB output, such as a computer or USB

wall adapter (not included).

While charging, the Battery Indicators will illuminate. When the HALO

Pocket Power 6000 is fully charged, the battery indicators will display

four solid lights. When fully charged, disconnect the cable.

NOTE:

The USB Type C Input Port located on this unit is only used for

charging the internal battery of the HALO POCKET POWER 6000.

CHARGING ELECTRONIC DEVICES

Connect the cable that came with your device, or the compatible cable

that came with the HALO Pocket Power 6000 to the USB Output Port.

Once your HALO Pocket Power 6000 is connected to your electronic

device, it will begin charging.

USING THE ANTI-SLIP PATCH

Equipped with an anti-slip patch, the HALO POCKET POWER 6000 will

stick to almost any smooth surfaced phone or phone case. The HALO

POCKET POWER 6000 is intended to stick to the back of your devices for

a hands free charge. To attach the HALO POCKET POWER 6000 to your

device, simply fold down the ap, exposing the sticky patch, and stick it

to your device. When not in use, protect the anti-slip patch from dust

and dirt by closing the foldable ap. To clean the anti-slip patch, simply

wipe down with a damp cloth & let dry, making it just like new.

SPECIFICATIONS

Model: HPP6000

Battery Cell Capacity: 6000mAh

USB Type C Input: 5V/2A

USB Output: 5V/2.1A

Dimensions: 4.57 x 2.68 x .46 inches

Weight: 140 g

MADE FOR IPOD/IPHONE/IPAD

The HALO POCKET POWER 6000 is Apple certied. “Made for iPod”, and

“Made for iPhone,” means that an electronic accessory has been

designed to connect specically to iPod, or iPhone, respectively, and

has been certied by the developer to meet Apple performance

standards. Apple is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please note that the

use of this accessory with iPod, or iPhone may aect wireless

performance. AirPlay, iPhone, iPod, iPod classic, iPod nano, iPod touch,

and Retina are trademarks of Apple Inc., registered in the U.S. and other

countries.

SAFETY PRECAUTIONS

• Read all instructions before using the product.

• Keep your power bank dry and away from moisture and corrosive

materials. The power bank should not be used near water or wet areas

such as bathtubs, showers, bathrooms, sinks, swimming pools or

basements.

• Do not clean your power bank with harsh chemicals, soaps or

detergents. Just wipe the case with a soft cloth.

• Keep your power bank away from heat sources, including open ames,

radiators, stoves, ovens, and any other devices that product heat.

• Do not puncture, crush or subject to mechanical shock.

• Do not attempt to disassemble.

• Make sure the power bank’s charging ports do not become

contaminated with lint or other debris. Use a canned-air type of

product periodically to ensure that the port openings are clear.

• Recharge your power bank once every three months when not in use.

COMPLIANCE WITH FCC REGULATION

This device complies with part 15 of the FCC Rules and RSS-Gen of IC

Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment o and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced technician for help.

CAUTION: To comply with the limits of the Class B digital device,

pursuant to Part 15 of the FCC Rules, this device must be used with

certied peripherals and shielded cables. All peripherals must be

shielded and grounded. Operation with non-certied peripherals or

non-shielded cables may result in interference to radio or reception.

LIMITED WARRANTY

HALO2CLOUD LLC. (HALO) warrants its products to be free from

defects in material and workmanship under normal use. Conditions are

as follows:

• During the rst 90 days from date of purchase, HALO will repair or

replace the defective product.

• HALO will, subject to inspection, repair the defective product or

replace it with a new or reconditioned unit. The return must be

accompanied by a Return Merchandise Authorization (RMA) number

to be issued upon request, and must be shipped prepaid.

• Where applicable, all requests for warranty returns must be

accompanied by a proof of purchase.

• The warranty does not extend to the electronic equipment that is

used, or incorporates with any of our products and accessories. HALO

shall not be held responsible for the improper use of its products.

• In no event shall HALO be liable for any incidental, special,

consequential or punitive damages arising out of the use of HALO’s

products.

For all questions or exchange requests, please call 888-907-6274, or

email us at [email protected].

This Limited Warranty sets forth the full scope of HALO’s obligations

and liabilities with respect to the product. All implied warranties,

including without limitation the implied warranties of merchantability

and tness for a particular purpose, are limited to the duration of this

Limited Warranty. In no event shall HALO be liable for any incidental,

special, consequential or punitive damages or any damages or losses of

or to electronic equipment or products that are used with any of

HALO’s products.

POCKET POWER

6000

PLEASE READ BEFORE OPERATING THIS EQUIPMENT