VTech Pull & Play Kitten User manual

Brand: VTech

Model: Pull & Play Kitten

Category: Toys & accessories

Type: User manual

VTech Pull & Play Kitten is an interactive, educational toy that encourages learning through play. Pull the kitten along to hear phrases, sounds, and melodies, or press the letter buttons to learn letters, colors, and numbers. With its light-up nose, roller ball, and playful songs, this cheerful kitten is sure to provide hours of fun and learning for your little one.

Pull & Play Kitten

User’s Manual

Printed in China

91-001664-001

Introduction

INTRODUCTION

Thank you for purchasing the VTech

Pull & Play Kitten learning toy!

The Pull & Play Kitten is a cheerful interactive kitten that loves to follow

and play with the big ball of wool! Pull the kitten along or press the letter

buttons and the kitten will introduce letters, colours and play music.

ON/OFF/VOLUME

CONTROL SWITCH

ROLLER BALL

LIGHT-UP

NOSE

LETTER BUTTONS

PULL CORD

Included In This Package/Getting Started

INCLUDED IN THIS PACKAGE

- One VTech

Pull & Play Kitten learning toy

- One user's manual

WARNING: All packing materials, such as tape, plastic sheets,

packaging locks and tags are not part of this toy,

and should be discarded for your child’s safety.

Rotate the packing locks

90 degrees counter-clockwise

Pull out the packing locks

NOTE: Please keep this instruction manual as it contains important

information.

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.

2. Locate the battery cover on the back of

the kitten. Use a screwdriver to loosen

the screw.

3. Install 2 new AAA (LR03/AM-4)

batteries following the diagram inside

the battery box. (The use of new

alkaline batteries is recommended for

maximum performance.)

4. Replace the battery cover and tighten

the screw to secure.

Battery Notice

BATTERY NOTICE

• Use new alkaline batteries for maximum performance.

• Use only batteries of the same or equivalent type as recommended.

• Do not mix different types of batteries: alkaline, standard (carbon-

zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.

• Do not use damaged batteries.

• Insert batteries with the correct polarity.

• Do not short-circuit the battery terminals.

• Remove exhausted batteries from the toy.

• Remove batteries during long periods of non-use.

• Do not dispose of batteries in fire.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the toy before charging (if

removable).

• Rechargeable batteries are only to be charged under adult

supervision.

Disposal of batteries and product

The crossed-out wheelie bin symbols on products and

batteries, or on their respective packaging, indicates they

must not be disposed of in domestic waste as they contain

substances that can be damaging to the environment and

human health.

The chemical symbols Hg, Cd or Pb, where marked,

indicate that the battery contains more than the specified

value of mercury (Hg), cadmium (Cd) or lead (Pb) set out

in Battery Directive (2006/66/EC).

The solid bar indicates that the product was placed on

the market after 13th August, 2005.

Help protect the environment by disposing of your product

or batteries responsibly.

For more information, please visit:

www.recycle-more.co.uk

www.recyclenow.com

PRODUCT FEATURES

1. ON/OFF/VOLUME

CONTROL SWITCH

To turn the unit ON, slide the ON/OFF/

VOLUME CONTROL SWITCH to

the LOW VOLUME ( ) or the HIGH

VOLUME ( ) position. To turn the unit

OFF ( ), slide the ON/OFF/VOLUME

CONTROL SWITCH to the OFF ( )

position.

2. PULL CORD

To convert the unit from a push toy to

a pull toy, remove the pull cord from

the storage compartment on the back

of the Pull & Play Kitten. For your

child’s safety we suggest you store the

pull cord in the compartment until your

child is walking.

3. AUTOMATIC SHUT OFF

To preserve battery life, the VTech

Pull & Play Kitten will

automatically power-down after approximately 30 seconds without

input. The unit can be turned on again by pressing any button or by

rolling the wheels twice in 1 second.

Product Features

Activities

ACTIVITIES

1. Slide the on/off/volume control

switch to turn the unit on. You will hear

a kitten sound, a phrase and a song.

The light will flash with the sounds.

2. Pull the kitten to hear a variety of

phrases, sounds and melodies. The

light will flash with sounds.

3. Press the letter buttons to learn letters

and colours and hear playful songs

and melodies. The light will flash with

sounds.

4. If there is no input after approximately 8 seconds, you will hear a fun

phrase. After another 8 seconds without input, you will hear another

fun phrase. If there continues to be no input for another 8 seconds,

the unit will play a short tune and power down. The unit can be turned

on again by pressing any button or by pulling the kitten.

Sing-Along Song Lyrics

SONG 1

I’m a little kitty, I like to play,

Pull me and I will follow you!

Meow meow meow.

SONG 2

I have one little nose.

It twinkles when we play together.

SONG 3

A-B-C-D

E-F-G

H-I-J-K

L-M-N-O-P

Q-R-S

T-U-V

W-X

Y and Z

Now I know my ABCs,

Next time, won’t you sing with me?

SONG 4

I have three colourful stripes 1-2-3.

Touch my stripes and we can play!

SONG 5

I have two perky little ears,

When I hear your happy voice,

It makes me purr.

Sing-Along Song Lyrics

MELODY LIST:

1. Hey Diddle Diddle

2. Camptown Races

3. The Entertainer

4. Ring Around the Rosy

5. Three Little Kittens

6. Yankee Doodle

7. Take Me Out to the Ball Game

8. Can Can

9 Clementine

10. Three Blind Mice

11. Hot Cross Buns

12 Bicycle Built for Two

CARE & MAINTENANCE

1. Keep the unit clean by wiping it with a slightly damp cloth.

2. Keep the unit out of direct sunlight and away from any direct heat

source.

3. Remove the batteries when the unit is not in use for an extended

period of time.

4. Do not drop the unit on hard surfaces.

Melody List/Care & Maintenance

TROUBLESHOOTING

If for some reason the program/activity stops working or malfunctions,

please follow these steps:

1. Please turn the unit OFF.

2. Interrupt the power supply by removing the batteries.

3. Let the unit stand for a few minutes, then replace the batteries.

4. Turn the unit ON. The unit should now be ready to play again.

5. If the product still does not work, replace with an entire set of new

batteries.

If the problem persists, please call our Consumer Services Department

on 01235 546810 (from UK) or +44 1235 546810 (outside UK) and a

service representative will be happy to help you.

Troubleshooting

IMPORTANT NOTE:

Creating and developing VTech

products is accompanied by

a responsibility that we take very seriously. We make every

effort to ensure the accuracy of the information which forms the

value of our products. However, errors sometimes can occur. It

is important for you to know that we stand behind our products

and encourage you to call our Consumer Services Department

on 01235 546810 (from UK) or +44 1235 546810 (outside UK)

with any problems and/or suggestions that you might have. A

service representative will be happy to help you.

VTech Pull & Play Kitten User manual

Brand: VTech

Model: Pull & Play Kitten

Category: Toys & accessories

Type: User manual

Download PDF

report

VTech Pull & Play Kitten User manual

VTech Pull & Play Kitten User manual

Related papers

Other documents