Sony NEX C3 User manual

Brand: Sony

Model: NEX C3

Category: Bridge cameras

Type: User manual

This manual is also suitable for

NEX-C3K/B

G:\Works\CX75410\DTP\4275482121\4275482121NEXC3U2\00COV-

NEXC3U2\010COV.fm

master: Right

NEX-C3

4-275-482-12(1)

NEX-C3

Interchangeable Lens

Digital Camera

Instruction Manual

E-mount

Preparing the camera

Mastering the basic

operation

Using the recording

functions

Using the playback

functions

Checking the functions

available

Importing images to the

computer

Others

010COV.fm Page 1 Tuesday, March 8, 2011 4:04 PM

NEX-C3

4-275-482-11(1)

G:\Works\CX75410\DTP\4275482121\4275482121N EXC3U2\00COV-

NEXC3U2\100BCO.fm

master: Right

NEX-C3

Printed using VOC (Volatile Organic

Compound)-free vegetable oil based ink.

Additional information on this product and

answers to frequently asked questions can be

found at our Customer Support Website.

100BCO.fm Page 84 Tuesday, March 8, 2011 4:05 PM

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the

space provided below. Refer to these numbers whenever you call upon your Sony dealer

regarding this product.

Model No. NEX-C3

Serial No. ______________________________

To reduce fire or shock hazard, do not expose the unit to rain or

moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS

DANGER

-TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, CAREFULLY FOLLOW

THESE INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the

proper configuration for the power outlet.

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical

burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as

hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery

terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a

car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking lithium ion batteries.

English

WARNING

CAUTION

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that

can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

[ Battery charger

Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC

power source (mains) as long as it is connected to the wall outlet (wall socket). If some

trouble occurs while using the battery charger, immediately shut off the power by

disconnecting the plug from the wall outlet (wall socket).

When a power cord (mains lead) is supplied, the power cord (mains lead) can be used with

this unit only, and should not be used with any other unit.

[ RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used

rechargeable batteries to the collection and recycling location nearest

you.

For more information regarding recycling of rechargeable batteries,

call toll free

1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

For Customers in the U.S.A. and Canada

UL is an internationally recognized safety organization.

The UL Mark on the product means it has been UL Listed.

If you have any questions about this product, you may call:

Sony Customer Information Center

1-800-222-SONY (7669)

The number below is for the FCC related matters only.

[ Regulatory Information

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual

could void your authority to operate this equipment.

For Customers in the U.S.A.

Declaration of Conformity

Trade Name: SONY

Model No.: NEX-C3

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the

limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

[ Notice for the customers in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,

108-0075 Japan. The Authorized Representative for EMC and product safety is Sony

Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or

guarantee matters please refer to the addresses given in separate service or guarantee

documents.

This product has been tested and found compliant with the limits set out in the EMC

Directive for using connection cables shorter than 3 meters (9.8 feet).

[ Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound

of this unit.

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail),

restart the application or disconnect and connect the communication cable (USB, etc.)

again.

For Customers in Europe

[ Disposal of Old Electrical & Electronic Equipment (Applicable in

the European Union and other European countries with separate

collection systems)

This symbol on the product or on its packaging indicates that this product

shall not be treated as household waste. Instead it shall be handed over to

the applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling

of this product. The recycling of materials will help to conserve natural

resources. For more detailed information about recycling of this product,

please contact your local Civic Office, your household waste disposal service or the shop

where you purchased the product.

[ Disposal of waste batteries (applicable in the European Union

and other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery

provided with this product shall not be treated as household waste.

On certain batteries this symbol might be used in combination with a

chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are

added if the battery contains more than 0.0005% mercury or 0.004% lead.

By ensuring these batteries are disposed of correctly, you will help prevent

potentially negative consequences for the environment and human health which could

otherwise be caused by inappropriate waste handling of the battery. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a

permanent connection with an incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery will be treated properly, hand over

the product at end-of-life to the applicable collection point for the recycling of electrical

and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the

product safely.

Hand the battery over to the applicable collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact

your local Civic Office, your household waste disposal service or the shop where you

purchased the product.

A moulded plug complying with BS 1363 is fitted to this equipment for your safety and

convenience.

Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the

supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or

mark) must be used.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the

fuse cover after you change the fuse. Never use the plug without the fuse cover. If you

should lose the fuse cover, please contact your nearest Sony service station.

Notice for customers in the United Kingdom

Table of contents

Preparing the camera

Checking the accessories supplied ...................................9

Identifying parts ................................................................10

Preparing the battery pack ...............................................14

Attaching/removing the lens .............................................17

Inserting a memory card (sold separately) .......................19

Attaching the flash ............................................................20

Turning on the camera and setting up the date ...............22

Mastering the basic operation

Shooting still images .........................................................24

Recording movies .............................................................25

Playing back images ........................................................26

Deleting images ................................................................27

Using the control wheel and soft keys ..............................29

Using the guide function of the camera ...........................31

Using the recording functions

Setting the function using Photo Creativity ....................... 32

Adjusting the brightness of still images (Exposure

compensation) .................................................................. 35

Changing the screen display (DISP) ................................ 35

Shooting with various drive mode..................................... 36

Selecting the flash mode .................................................. 41

Using the self-timer........................................................... 42

Shooting still images continuously.................................... 42

Selecting the image size................................................... 44

Using the playback functions

Enlarging the playback image (Enlarge Image) ............... 46

Displaying the image list................................................... 47

Viewing images on a TV ................................................... 48

Checking the functions available

Menu list ........................................................................... 49

Functions available for each shooting mode ................... 57

Flash modes available...................................................... 58

Importing images to the computer

Installing the software....................................................... 59

What you can do with the supplied software ................... 61

Others

Checking the number of recordable images ................... 63

List of icons on the LCD monitor ...................................... 66

Learning more about the camera (α Handbook) ............. 69

Troubleshooting................................................................ 70

Precautions....................................................................... 74

Specifications ................................................................... 78

Index................................................................................. 83

This manual covers several models supplied with different lenses.

The model name varies depending on the supplied lens. The available model varies

depending on the countries/regions.

Model name Lens

NEX-C3A E16 mm

NEX-C3D E18 – 55 mm and E16 mm

NEX-C3K E18 – 55 mm

Preparing the camera

Checking the accessories supplied

First check the model name of your camera (page 8). The accessories supplied

differ depending on the model.

The number in parentheses indicates the number of pieces.

Common accessories

• Battery charger BC-VW1 (1)

• Power cord (mains lead) (1) (not

supplied in the U.S.A. and Canada)

• Rechargeable battery pack

NP-FW50 (1)

• USB cable (1)

• Shoulder strap (1)

• Flash HVL-F7S (1)/Flash case (1)

•CD-ROM (1)

– Application Software for

α camera

– α Handbook

• Instruction Manual (This manual)

(1)

NEX-C3A

• E16 mm single focus lens/Front

lens cap (1) (attached to the

camera)

NEX-C3D

• E16 mm single focus lens/Front

lens cap/Rear lens cap (1)

• E18 – 55 mm zoom lens/Front lens

cap (1) (attached to the camera)/

Lens hood (1)

NEX-C3K

• E18 – 55 mm zoom lens/Front lens

cap (1) (attached to the camera)/

Lens hood (1)

Preparing the camera

Identifying parts

See the pages in parentheses for details of operation.

When the lens is removed

A (Playback) button (26)

B Shutter button (25)

C ON/OFF (Power) switch (22)

D AF illuminator/Self-timer lamp/

Smile Shutter lamp

E Speaker

F Microphone*

G Smart Accessory Terminal (20)

H Lens (17)

I Lens release button (18)

J Mount

K Image sensor**

L Lens contact**

* Do not cover this part during movie

recording.

** Do not touch this part directly.

Preparing the camera

A (USB) terminal

B Hook for shoulder strap

Attaching the shoulder strap is

recommended not to drop the

camera.

C HDMI terminal (48)

D Light sensor

E LCD monitor

The tilting LCD monitor of the

camera allows flexible shooting

positions.

F MOVIE button (25)

G Control wheel (29)

H Soft keys (30)

Preparing the camera

A Image sensor position mark

B Battery cover (15)

C Memory card cover (19)

D Tripod receptacle

• Use a tripod with a screw length

of less than 5.5 mm (7/32 inch).

You will be unable to firmly

secure the camera to tripods

having screws longer than 5.5

mm (7/32 inch), and may damage

the camera.

E Battery compartment (15)

F Connection plate cover

For using the AC-PW20 AC

Adaptor (sold separately)

G Access lamp (20)

H Memory card insertion slot (19)

Flash

A Screw

B Flash*

C Connector*

* Do not touch this part directly.

If it is dirty, wipe it off with a soft

clean cloth.

Preparing the camera

Lens

E18 – 55 mm F3.5-5.6 OSS

(supplied with NEX-C3D/

C3K)

A Hood index

B Focusing ring

C Zooming ring

D Focal-length scale

E Focal-length index

F Lens contacts*

G Mounting index

* Do not touch this part directly.

E16 mm F2.8 (supplied with

NEX-C3A/C3D)

A Converter index*

B Focusing ring

C Lens contacts**

D Mounting index

* A converter is sold separately.

** Do not touch this part directly.

Preparing the camera

Preparing the battery pack

When using the camera for the first time, be sure to charge the NP-FW50

“InfoLITHIUM” battery pack (supplied).

Charging the battery pack

The “InfoLITHIUM” battery pack can be charged even when it has not been

fully depleted. It can also be used when it has not been fully charged.

Insert the battery pack onto the

battery charger.

• Push the battery pack until it clicks.

Connect the battery charger to

the wall outlet (wall socket).

• The CHARGE lamp turns off when

charging is finished.

• Time required to charge a fully depleted

battery pack at a temperature of 25 °C

(77 °F) is about 250 minutes.

For the U.S.A and Canada

CHARGE lamp

For countries/regions other

than the U.S.A. and Canada

Power cord (mains lead)

Plug

CHARGE lamp

Preparing the camera

• The charging time differs depending on the remaining capacity of the battery pack

or charging conditions.

• We recommend charging the battery pack in an ambient temperature of between

10 °C to 30 °C (50 °F to 86 °F). You may not be able to efficiently charge the

battery pack outside of this temperature range.

• Connect the battery charger to the nearest wall outlet (wall socket).

• The CHARGE lamp may flash quickly when the battery pack is used for the first

time, or the battery pack has not been used for a long time. In such cases, remove

the battery pack from the charger and re-attach it, then charge the battery pack.

• Do not try to charge the battery pack again right after it has been charged, or when

it has not been used after being charged. Doing so will affect the performance of

the battery pack.

Inserting the charged battery pack

Notes

While sliding the cover open

lever, open the cover.

z Using your camera abroad — Power source

You can use your camera and battery charger, and the AC-PW20 AC Adaptor

(sold separately) in any countries/regions where the power supply is within

100 V to 240 V AC, 50 Hz/60 Hz.

An electronic voltage transformer is unnecessary and its use may cause a

malfunction.

Preparing the camera

Checking the remaining battery level

Check the level with the following indicators and percent figures displayed on

the LCD monitor.

• The displayed level may not be correct under certain circumstances.

Firmly insert the battery pack

all the way while pressing the

lock lever with the tip of the

battery.

Close the cover.

Battery level

“Battery

exhausted.”

High Low

You cannot

shoot any more

image.

Note

Lock lever

z What is an “InfoLITHIUM” battery pack?

An “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions

for exchanging information related to operating conditions with your camera.

Using the “InfoLITHIUM” battery pack, the remaining battery time in percent

figures is displayed according to the operating conditions of your camera.

Preparing the camera

Removing the battery pack

Attaching/removing the lens

The camera will come with the lens attached.

Refer to the steps below when attaching other lenses.

Set the power switch of the camera to OFF before you attach or remove the

lens.

Turn off the camera and slide the lock

lever in the direction of the arrow after

you confirm that the access lamp is not lit.

Be careful not to drop the battery pack.

If the cap or the packaging lid

is attached, remove it from the

camera or the lens.

• Quickly change the lens somewhere

away from dusty locations so as to

keep dust or debris from getting

inside the camera.

Mount the lens by aligning the

white index marks on the lens

and the camera.

• Hold the camera’s face downward

to prevent the dust from entering

into the camera.

White index marks

Lock lever

Preparing the camera

• When attaching a lens, do not press the lens release button.

• Do not use force when attaching a lens.

• The Mount Adaptor (sold separately) is required to use an A-mount lens (sold

separately). For details, refer to the operating manual supplied with the Mount

Adaptor.

Removing the lens

• When changing the lens, if dust or debris gets inside the camera and adheres to the

surface of the image sensor (the part that acts as the film), it may appear on the

image, depending on the shooting environment. The camera vibrates slightly when

it is turned off, due to the anti-dust function, to prevent dust from adhering to the

image sensor. However, attach or remove the lens quickly somewhere away from

dusty locations.

• Do not leave the camera with the lens removed.

• When you want to use body caps or rear lens caps, please purchase ALC-B1EM

(body cap) or ALC-R1EM (rear lens cap) (sold separately).

While pushing the lens lightly

toward the camera, turn the

lens clockwise until it clicks

into the locked position.

• Be sure to put the lens on straight.

Notes

Press the lens release button

all the way in and turn the lens

counterclockwise until it

stops.

Lens release button

Notes

Preparing the camera

Inserting a memory card (sold separately)

Memory cards that you can use

You can use following memory cards with this camera: “Memory Stick PRO

Duo” media, “Memory Stick PRO-HG Duo” media, SD memory card, SDHC

memory card, and SDXC memory card. You cannot use MultiMediaCard.

For recording movies, it is recommended that you use following memory

cards. “Memory Stick PRO Duo” media and “Memory Stick PRO-HG Duo”

media are both called as “Memory Stick PRO Duo” media, and SD memory

card, SDHC memory card and SDXC memory card are all called as “SD card”

in this manual.

• (Mark2) (“Memory Stick PRO Duo” media

(Mark2))

• (“Memory Stick PRO-HG Duo” media)

• SD memory card, SDHC memory card, SDXC memory card (Class 4 or

more)

Open the cover.

Insert a memory card.

• Insert the memory card until it

clicks as illustrated.

Close the cover.

Check on the direction of the

notched corner.

Preparing the camera

• Images recorded on an SDXC memory card cannot be imported to or played on

computers or AV devices that are not compatible with exFAT. Make sure that the

device is compatible with exFAT before connecting it to the camera. If you

connect your camera to an incompatible device, you may be prompted to format

the card. Never format the card in response to this prompt, as doing so will erase

all data on the card. (exFAT is the file system used on SDXC memory cards.)

Removing the memory card

• When the access lamp is lit, do not remove the memory card or the battery pack, or

turn off the power. The data may be corrupted.

• Set the power switch of the camera to OFF before you attach or remove the flash.

Attaching the flash

When you want to use a flash during shooting, attach the flash device

(supplied).

The flash is enabled when it is raised, and disabled when lowered.

Set the power switch of the camera to OFF before you attach or remove the

flash.

Note

Open the cover, make sure that the access

lamp is not lit, and push the memory card

once.

Notes

Access lamp

Page is loading ...

Sony NEX C3 User manual

Brand: Sony

Model: NEX C3

Category: Bridge cameras

Type: User manual

This manual is also suitable for

NEX-C3K/B

Download PDF

report

Sony NEX C3 User manual

This manual is also suitable for

Sony NEX C3 User manual

Related papers

Other documents