Samsung LANDIAO I70 User manual

Thank you for buying a Samsung camera.

This manual will guide you through using the camera, including

capturing images, downloading images and using the application software.

Please read this manual carefully before using your new camera.

User Manual

ENGLISH

ŝ1Ş

Instructions Getting to know your camera

Thank you for buying a Samsung Digital Camera.

ƃ Prior to using this camera, please read the user manual thoroughly.

ƃ When you require After Sales service, please bring the camera and the cause of

the camera malfunction (such as battery, Memory card etc.) to the A/S centre.

ƃ Please check that the camera is operating properly prior to when you intend to

use it (e.g. for a trip or an important event) to avoid disappointment. Samsung

takes no responsibility for any loss or damage that may result from camera

malfunction.

ƃ Keep this manual in a safe place.

ƃ If you use a card reader to copy the images on the memory card to your PC, the

images could be damaged. When transferring the images taken with the camera

to your PC, be sure to use the supplied USB cable to connect the camera to

your PC. Please note that the manufacturer accepts no responsibility for loss or

damage of images on the memory card due to the use of a card reader.

Ҭ Microsoft, Windows and Windows logo are registered trademarks of Microsoft

Corporation incorporated in the United States and/or other countries.

Ҭ is a trademark of SRS Labs, Inc.

WOW HD technology is incorporated under license from SRS Labs, Inc.

Ҭ

All brand and product names appearing in this manual are registered trademarks.

Ҭ The contents and illustrations in this manual are subject to change without prior

notice for upgrading the camera functions.

ƈ Use this camera in the following order.

Set up the camera driver

Take a picture

Insert the USB cable

Check [Removable Disk]

Before connecting the camera to a PC, via

the USB cable, you will need to set up the

camera driver. Install the camera driver

that is contained in Application software

CD-ROM. (p.101)

Take a picture. (p.17)

Insert the supplied USB cable into the

PC’s USB port and the camera’s USB

connection terminal. (p.104)

Check the camera’s power

Check the camera’s power. If the power is

turned off, press the camera button to turn

it on. (p.14, 22)

Open Windows EXPLORER and search

for Removable Disk (SAMSUNG). (p.105)

HD

ŝ2Ş

Danger

WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

ƈ Do not use the flash in close proximity to people or animals. Positioning the flash

too close to your subject’s eyes may cause eyesight damage.

ƈ For safety reasons keep this product and accessories out of reach of children or

animals to prevent accidents e.g.:

ҮSwallowing battery or small camera accessories. If an accident should occur,

please consult a doctor immediately.

ҮThere is the possibility of injury from the camera’s moving parts.

ƈ Battery and camera may become hot during prolonged use and it may result in

camera malfunction. Should this be the case, allow the camera to sit idle for a

few minutes to allow it time to cool.

ƈ Do not leave this camera in places subject to extremely high temperatures, such

as a sealed vehicle, direct sunlight or other places with extremes of temperature.

Exposure to extreme temperatures may adversely affect the camera’s internal

components and could cause a fire.

ƈ When in use, do not cover the camera or Charger. This may cause heat to build

up and distort the camera body or cause a fire. Always use the camera and its

accessories in a well-ventilated area.

DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

ƈ Do not attempt to modify this camera in any way. To do so may result in fire,

injury, electric shock or severe damage to you or your camera. Internal

inspection, maintenance and repairs should only be carried out by your dealer or

Samsung Camera Service centre.

ƈ Please do not use this product in close proximity to flammable or explosive

gases, as this could increase the risk of explosion.

ƈ Should any form of liquid or a foreign object enter the camera, do not use it.

Switch off the camera, and then disconnect the power source. You must contact

your dealer or Samsung Camera Service centre. Do not continue to use the

camera as this may cause a fire or electric shock.

ƈ Do not insert or drop metallic or inflammable foreign objects into the camera

through access points e.g. the memory card slot and battery chamber.

This may cause a fire or electric shock.

ƈ Do not operate this camera with wet hands. This could pose a risk of electric

shock.

Warning

ŝ3Ş

Caution Contents

CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in a minor or moderate injury.

ƈ Leaking, overheating, or damaged battery could result in fire or injury.

ҮUse battery with the correct specification for the camera.

ҮDo not short circuit, heat or dispose of battery in fire.

ҮDo not insert the battery with the polarities reversed.

ƈ Remove the battery when not planning to use the camera for a long period of

time. Otherwise the battery may leak corrosive electrolyte and permanently

damage the camera’s components.

ƈ Do not fire the flash while it is in contact with hands or objects. Do not touch the

flash after using it continuously. It may cause burns.

ƈ Do not move the camera while it is switched on, if you are using the AC Charger.

After use, always switch off the camera before unplugging the cable from the

wall socket. Then make sure that any connector cords or cables to other devices

are disconnected before moving the camera. Failure to do so may damage the

cords or cables and cause a fire or electric shock.

ƈ Take care not to touch the lens or lens cover to avoid taking an unclear image

and possibly causing camera malfunction.

ƈ Avoid obstructing the lens or the flash when you capture an image.

ƈ When using this camera in low temperatures, the following cases may be found.

These are not camera malfunctions and usually recover at normal temperature.

- It takes more time to turn on the LCD monitor and the colour may be differ from

the subject.

- When changing the composition, there may be an after image on the LCD

monitor.

ƈ Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip

cards near the case.

READY

ƃSystem chart ōōōōōōōōō5

ƃIdentification of featuresōōōōō6

ƈSelf-timer lamp ōōōōōōōō8

ƈCamera Status Lamp ōōōōō8

ƃConnecting to a Power Sourceōō9

ƈHow to charge the rechargeable

battery (SLB-0837) ōōōōōō10

ƃInserting the memory card ōōō11

ƃInstructions on how to use the

memory card ōōōōōōōō12

ƃ

When Using the Camera for the First Time

ō14

ƃStarting the recording mode ōō15

ƈSelecting modes ōōōōōōō16

ƈHow to use the AUTO mode ōō17

ƈ

How to use the PROGRAM mode

ō17

ƈ

How to use the MOVIE CLIP mode

ō17

ƈ

Pausing while recording a movie clip

(Successive Recording)

ōōōō18

ƈHow to use the ASR (Advanced

Shake Reduction) modeōōōō18

ƈWise Shot ōōōōōōōōō19

ƈHow to use the SCENE mode ō19

ƈFace recognition ōōōōōōō20

ƃThings to watch out for when taking

pictures ōōōōōōōōōōō20

ƃFocus lockōōōōōōōōōō21

ƃ

Using the camera buttons to set the camera

ō22

ƈPOWER button ōōōōōōō22

ƈSHUTTER button ōōōōōō22

ƈ

FR (Face Recognition) / Lock button

ō22

ƈZOOM W / T button ōōōōō23

ƈInfo / Up (Ɗ) button ōōōōō24

ƈMacro / Down (ƌ) button ōōō25

ƈFlash / Left (Ȝ) button ōōōō26

ƈSelf-timer / Right (Ȟ) button ōō28

ƈM (Mode) button ōōōōōōō29

ƈFn button ōōōōōōōōōō29

ƈE (Effect) button ōōōōōōō33

ƈE (Effect) button : Colour ōōō34

ƈ

E (Effect) button : Special Colour

ō35

ƈ

E (Effect) button : Image editing

ō36

ƈE (Effect) button : Funōōōōō37

ƈPreset focus frames ōōōōō37

ƈComposite shooting ōōōōō38

ƈPhoto Frame ōōōōōōōō40

ƈMENU / OK button ōōōōōō41

ƃUsing the LCD monitor to adjust

the camera settings ōōōōōō41

ƈSharpness ōōōōōōōōō42

ƈContrast ōōōōōōōōōō42

ƈAuto Focus type ōōōōōōō42

ƈVoice Memo ōōōōōōōō43

ƈVoice Recording ōōōōōōō43

ƈ

Recording the movie clip without voice

ō44

ƈSCENE mode ōōōōōōōō44

ƃStarting play mode ōōōōōō45

RECORDING

PLAY

ŝ4Ş

Contents

ƈPlaying back a still image ōōō45

ƈPlaying back a movie clip ōōō45

ƈMovie clip capture functionōōō46

ƈOn camera movie trimming ōō46

ƈPlaying back a recorded voice ō47

ƈPlaying back a voice memo ōō47

ƃLCD monitor Indicator ōōōōō48

ƃUsing the camera buttons to adjust

the camera ōōōōōōōōō48

ƈPlay mode button ōōōōōō48

ƈThumbnail / Enlargement button /

Volume button ōōōōōōōō49

ƈInfo / Up (Ɗ) button ōōōōō50

ƈ

Play & Pause / Down (ƌ) button

ō51

ƈLeft (Ȝ) / Right (Ȟ) / Menu / OK

button ōōōōōōōōōōō51

ƈDelete button ōōōōōōōō52

ƈPrinter button ōōōōōōōō52

ƈ

Special Effect (E button) : Resize

ō52

ƈSpecial Effect (E button) : Rotating

an image ōōōōōōōōōō53

ƈ

Special Effect (E button) : Colour

ō54

ƈSpecial Effect (E button) : Special

Colour ōōōōōōōōōōō54

ƈSpecial Effect (E button) : Image

editing ōōōōōōōōōōō56

ƈSpecial Effect (E button) : FUN ō57

ƈCartoon ōōōōōōōōōō57

ƈPreset focus frames ōōōōō59

ƈComposite image ōōōōōō60

ƈPhoto Frame ōōōōōōōō61

ƈSticker ōōōōōōōōōōō62

ƈText Typing ōōōōōōōōō63

ƃText Typing ōōōōōōōōō64

ƃSetting up the play back function

using the LCD monitorōōōōō65

ƃSlide Show ōōōōōōōōō66

ƃAlbum ōōōōōōōōōōō68

ƈView ōōōōōōōōōōōō68

ƈPassword setup ōōōōōōō69

ƃVoice memo ōōōōōōōōō70

ƃDeleting images ōōōōōōō70

ƃProtecting images ōōōōōō71

ƃDPOF ōōōōōōōōōōō71

ƃDPOF : STANDARD ōōōōō72

ƃDPOF : Index ōōōōōōōō72

ƃDPOF : Print size ōōōōōōō73

ƃCopy To Card ōōōōōōōō73

ƃPictBridge ōōōōōōōōōō74

ƃPictBridge : Picture Selection ōō75

ƃPictBridge : Print Setting ōōōō75

ƃPictBridge : Reset ōōōōōō76

ƃSound menuōōōōōōōōō76

ƃSound ōōōōōōōōōōō77

ƃSetup menu ōōōōōōōōō78

ƃSetup menu 1 ōōōōōōōō79

ƈFile name ōōōōōōōōōō79

ƈLANGUAGE ōōōōōōōō79

ƈSetting up the Date / Time / Date

type ōōōōōōōōōōōō79

ƈImprinting the recording date ōō80

ƈLCD brightness ōōōōōōō80

ƈAuto Focus lampōōōōōōō80

ƈStart up imageōōōōōōōō80

ƃSetup menu 2 ōōōōōōōō81

ƈQuick view ōōōōōōōōō81

ƈAuto power off ōōōōōōōō81

ƈLCD saveōōōōōōōōōō81

ƈSelecting Video out typeōōōō82

ƈPassword setup ōōōōōōō83

ƈFormatting a memory ōōōōō83

ƈInitialisation ōōōōōōōōō83

ƃ

MP3 / PMP / TEXT VIEWER Mode

ō84

ƃStarting the MP3 / PMP / TEXT

VIEWER modeōōōōōōōō85

ƃLCD monitor indicator for MP3 /

PMP / TEXT VIEWER mode ōō87

ƃUsing the camera buttons to adjust

the camera ōōōōōōōōō88

ƈVolume button ōōōōōōōō88

ƈPlay & Pause / Seeking button ō88

ƈDelete button ōōōōōōōō88

ƈHold / Equalizer button ōōōō89

ƈPlaylist button ōōōōōōōō89

ƃSetting up the playback function

using the LCD monitorōōōōō90

ƈResume ōōōōōōōōōō91

ƈPlay mode ōōōōōōōōō91

ƈSkin of MP3 player ōōōōōō91

ƈPlaying back the slide show ōō92

ƈSetting slide show interval ōōō92

ƈDelete all ōōōōōōōōōō92

ƈFrame search ōōōōōōōō92

ƈDisplay setting ōōōōōōōō93

ƈSetting up the recording function

in the MP3 modeōōōōōōō93

ƈAuto Scroll ōōōōōōōōō93

ƈMP3 BGM Setting ōōōōōō94

ƈLanguage setting ōōōōōō94

ƃImportant notes ōōōōōōō94

ƃWarning indicator ōōōōōōō96

ƃ

Before contacting a service centre

ō96

ƃSpecification ōōōōōōōōō98

ƃSoftware Notes ōōōōōōō101

ƃAbout the softwareōōōōōō101

ƃ

Setting up the application software

ō102

ƃStarting PC mode ōōōōōō104

ƃRemovable Diskōōōōōōō105

ƃRemoving the removable disk ō106

ƃ

Setting up the USB Driver for MAC

ō107

ƃUsing the USB Driver for MACō107

ƃRemoving the USB Driver for

Windows 98SE ōōōōōōō107

ƃDigimax Converterōōōōōō108

ƃDigimax Master ōōōōōōō109

ƃFAQōōōōōōōōōōōō112

SOFTWARE

MP3 / PMP / TEXT VIEWER Mode

SETUP

ŝ5Ş

System chart

Please check that you have the correct contents before using this product. The contents can vary depending on the sales region.

To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre.

User manual,

Product warranty

Camera case

SD memory card / MMC

(see p.12)

DPOF compatible

printer (see p.71)

AC adapter (SAC-45) /

USB cable (SUC-C2)

Rechargeable battery

(SLB-0837)

PictBridge compatible

printer (see p.74)

Computer

External monitor

(see p.82)

< Included items >

Camera strap Software CD

(see p.101~102)

Earphones

AV cable

ŝ6Ş

Identification of features

Front & Top

Face Recognition (FR) / Lock button

Shutter button

Power button

Speaker

Self-timer / AF lamp

Microphone

Lens

Flash

ŝ7Ş

Back

Identification of features

9 button touch pad

(Smart button)

Camera strap

Zoom W (Thumbnail) / Zoom T (Digital zoom) / Volume button

Camera status lamp

LCD monitor

Earphones jack

ŝ8Ş

ƈ Self-timer lamp

ƈ Camera Status Lamp

Side / Bottom

Battery lock lever

Battery chamber

Battery chamber cover

Status Description

The lamp turns on and off when the camera is ready to

take a picture

The lamp blinks while saving the image data and turns

off when the camera is ready to take a picture

The lamp is on (The lamp will be turned off after

recognising the camera)

The lamp is off (LCD monitor turns off)

The lamp turns on

The lamp blinks

Tripod socket USB / AV port

Identification of features

Memory card slot

When the USB cable is

attached to a computer

After taking a picture

Power on

Transmitting Data

with a PC

When the USB cable is

attached to a printer

When the printer is

printing

When the AF activates

Icon Status Description

For the first 8 seconds, the lamp blinks at 1 second

intervals.

For the final 2 seconds, the lamp blinks quickly at 0.25-

second intervals.

For the 2 seconds, the lamp blinks quickly at 0.25-second

intervals before taking a picture.

A picture will be taken after about 10 seconds and 2

seconds later a second picture will be taken.

Blinking

The lamp turns on

(The camera focus on the subject)

The lamp blinks

(The camera doesn't focus on the subject)

ŝ9Ş

Connecting to a Power Source

ƈ You should use the rechargeable battery (SLB-0837) supplied with the camera.

Be sure to charge the battery before using the camera.

ƈ SLB-0837 rechargeable battery Specification

Model SLB-0837

Type Lithium Ion

Capacity 860mAh

Voltage 3.7V

Important information about battery usage.

ƃ When the camera is not used, turn off the camera power.

ƃ Please remove the battery if the camera will not be used for long periods.

Batteries can lose power over time and are prone to leaking if kept inside

the camera.

ƃ Low temperatures (below 0˚C) can affect the performance of the battery

and you may experience reduced battery life.

ƃ Batteries will usually recover at normal temperatures.

ƃ During extended use of the camera, the camera body may become warm.

This is perfectly normal.

ƃ When you use earphones, do not remove the battery while the camera is

turning on. It may generate a loud noise.

INFORMATION

Approx. 150 MIN

Charging time

(When the camera is turned off)

ƈ Number of images and battery life : Using the SLB-0837

ſ These figures are measured under Samsung’s standard conditions and shooting

conditions and may vary depending on the user’s methods.

Conditions

Still image

Approx. 90 MIN /

Approx. 180 shots

Approx. 80 MIN

Using the fully charged battery, Auto

mode, 7M image size, Fine image quality,

Shot to shot interval: 30Sec.

Changing the zoom position between

Wide and Tele after every shot.

Using the flash on every second shot.

Using the camera for 5 minutes and

then Powering it off for 1 minute.

Using the fully charged battery

640x480 image size

30fps frame rate

Movie

ſ These figures are measured under Samsung’s standard conditions and shooting

conditions and may vary depending on the user’s methods.

Conditions

Using the fully charged battery

Turning off the LCD monitor

Using the fully charged battery

Approx. 210 MIN

Approx. 135 MIN

MP3

PMP

Multi

Media

Battery life / Number

of images

Battery life / Number of

images

ŝ10Ş

Important information about USB cable usage.

ƃ Use a USB cable (SUC-C2) with the correct specification.

ƃ If the camera is connected to the PC through a USB hub :

connect the camera directly to the PC.

ƃ If the camera and other devices are connected to the PC at the same time :

remove other device.

ƃ If the USB cable is connected to a port located on the front of the PC :

remove the cable and connect it to a port located on the back of the PC.

ƃ If the USB port of the PC doesn't meet the Power output standard (5V,

500mA), the camera may not be charged.

CAUTION

ƈ How to charge the rechargeable battery (SLB-0837)

Charging LED

Connecting to a Power Source

ƈ You can charge the rechargeable battery (SLB-0837) by using the SAC-45 KIT

which consists of the AC adapter (SAC-45) and the USB cable (SUC-C2).

When the SAC-45 and SUC-C2 are combined, they can be used as an AC

cable.

ƃ Using an AC cable

: Connect the AC adapter to the USB cable.

It can be used as a power cable.

ƃ Using a USB cable

: Remove the AC adapter (SAC-45).

You can download stored images to your PC

(p.104) or supply the power to your camera

through the USB cable.

ŝ11Ş

ƈ Charging LED of the AC Adapter

ƃ If you insert the fully discharged battery to charge it, do not turn on the camera at

the same time. The camera may not be turned on because of the low battery

capacity. Charge the battery for more than 10 minutes before using the camera.

ƃ Do not use the flash frequently or take a movie clip with the fully discharged

battery charged for a short time. Even if the charger is inserted, the camera

power may be turned off because the rechargeable battery is discharged again.

Charging LED

Being Charged Red LED is on

Charging is complete Green LED is on

Charging error Red LED is off or blinking

Orange coloured LED is on

ƃ Before inserting any cables or AC adapter, check the directions and do not

insert by force. It may cause breakage of cable or camera.

ƃ If the charging LED of the AC Charger does not turn on or blink after

inserting the rechargeable battery, please check whether the battery is

inserted correctly.

ƃ If you charge the battery with the camera power on, the battery can't charge

fully. Turn the camera off while charging the battery.

CAUTION

Connecting to a Power Source

Inserting the memory card

ƈ Insert the battery as shown

- If the camera does not turn on after you

have inserted battery, please check

whether the battery is inserted with the

correct polarity (+ / -).

- When the battery chamber cover is

opened, do not force the battery chamber

cover. This may damage it.

ƈ

There are 4 indicators for battery condition that are displayed on the LCD monitor.

ƈ Insert the memory card as shown.

- Turn off the camera’s power before

inserting the memory card.

- Have the front of the memory card facing

toward the back of the camera (LCD

monitor) and the card pins toward the front

of the camera (Lens).

- Do not insert the memory card the wrong

way round. Doing so may damage the

memory card slot.

Battery status

Battery indicator

The battery is

fully charged

Low battery capacity

(Prepare to recharge

or use spare battery)

Low battery capacity

(Prepare to recharge

or use spare battery)

Flat battery.

Recharge or use

spare battery.

Being discharged

(Using the AC adapter)

ŝ12Ş

ƃ If the memory card is subjected to any of the following, the recorded data may

become corrupted :

- When the memory card is used incorrectly.

- If the power is switched off or the memory card is removed while recording,

deleting (formatting) or reading.

ƃ Samsung cannot be held responsible for lost data.

ƃ It is advisable to copy important data onto other media as back-up e.g. floppy

disks, hard disks, CD etc.

ƃ If there is insufficient memory available

: A [Memory Full!] message will appear and the camera will not operate.

To optimise the amount of memory in the camera, replace the memory card or

delete unnecessary images stored on the memory card.

Instructions on how to use the memory card

ƃ Be sure to format the memory card (see p.83) if you are using a newly

purchased memory card for the first time, if it contains data that the camera

cannot recognise, or if it contains images captured with a different camera.

ƃ Turn off the camera power whenever the memory card is being inserted or

removed.

ƃ Repeated use of the memory card will eventually reduce the memory card’s

performance. Should this be the case, you will need to purchase a new memory

card. Wear and tear on the memory card is not covered by the Samsung

warranty.

ƃ The memory card is an electronic precision device.

Do not bend, drop or subject the memory card to any heavy impact.

ƃ Do not store the memory card in an environment with strong electronic or

magnetic fields, e.g. near loud speakers or TV receivers.

ƃ Please do not use or store in an environment where there are extremes in

temperature.

ƃ Do not allow the memory card to become dirty or to come into contact with any

liquid. Should this happen, clean the memory card with a soft cloth.

ƃ Please keep the memory card in its case when not in use.

ƃ During and after periods of extended use, you may notice that the memory card

is warm. This is perfectly normal.

ƃ Do not use a memory card that is used in another digital camera.

To use the memory card in this camera, format the memory card using this

camera.

ƃ Do not use a memory card formatted by another digital camera or memory card

reader.

ŝ13Ş

Super Fine Fine Normal 30FPS 15FPS

137 263 380

189 359 511

293 540 750

930 1456 1793

154 295 425

176 338 485

256 481 680

856 1402 1780

About 20' About 40'

About 40' About 60'

ƈ When using a 512MB MMC (Multi Media Card), the specified shooting capacity

will be as follows. These figures are approximate as image capacities can be

affected by variables such as subject matter and memory card type.

ſ The recording times can be changed by the zoom operation.

The zoom button doesn’t use during the movie recording.

Print

Wide

Movie

clip

Still

Image

ƃ Don't remove the memory card when the camera status lamp is blinking

as this may cause damage to data in the memory card.

INFORMATION

ƈ The camera can use SD Memory Cards and MMC (Multi Media Cards).

[SD (Secure Digital) memory card]

Write protect

switch

Label

Card pins

The SD memory card has a write protect

switch that prevents image files from being

deleted or formatted.

By sliding the switch to the bottom of the

SD memory card, the data will be

protected. By sliding the switch to the top

of the SD memory card, the data

protection will be cancelled. Slide the

switch to the top of the SD memory card

before taking a picture.

Recorded image

size

Instructions on how to use the memory card

ŝ14Ş

When Using the Camera for the First Time

ƈ When the camera is turned on for the first time, a menu will be displayed to set

date, time and language in the LCD monitor. This menu will not be displayed

again after setting up the date, time and language. Set up the date, time and

language before using this camera.

ƃ Turning on the camera

To turn on the camera, press the Power button (ڹ) or Open the camera (ں) as

shown.

ƃ Setting up the date, time and date type

1. Select the [Date&Time] menu by pressing

the Ɗƌ button and press the Ȟ button.

2. Select the desired sub menu by pressing

the ƊƌȜȞ button and press the OK button.

Ȟ button : selects YEAR / MONTH / DAY /

HOUR / MINUTE / DATE TYPE

Ȝ button : Moves the cursor to the [Date&Time]

main menu if the cursor is at the first item of the date and time

setup. In all other instances, the cursor will be shifted to the left of

its current position.

Ɗƌ button : changes the value of each item.

ƃ Setting up the language

1. Select the [LANGUAGE] menu by pressing

the Ɗƌ button and press the Ȟ button.

2. Select the desired sub menu by pressing

the Ɗƌ button and press the OK button.

ƃ You can select one of the following 22 languages.

- English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese,

Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai,

Bahasa (Malay / Indonesian), Arabic, Polish, Hungarian, Czech and

Turkish.

ƃ Even if the camera is restarted, the language setting will be maintained.

INFORMATION

Setup1

2007/ 02/ 01

13:00

yy/mm/dd

Back Set

Date&Time



LANGUAGE



OK







Setup1

LANGUAGE ENGLISGH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

Back Set



Date&Time



OK

ŝ15Ş

Starting the recording mode

ۄ

ۆ

ۇ

؅

؈

ۂ

ہ

ۀ

ڿ

ھ

ڽ

ڼ

ۅ

؉

ۃ

؇

؆

ڻں ڹ

،

؋

؊

ۄ : Battery (p.11)

ۅ : Image size (p.29)

ۆ : Image quality /

Frame rate (p.30)

ۇ : Continuous shot

(p.30)

؅ : Metering (p.31)

؆ : ISO (p.31)

؇ : White Balance

(p.32)

؈ :

Exposure

compensation (p.33)

؉ 2007/02/01 01:00 PM : Date/ Time (p.79)

؊ : Camera shake

warning (p.21)

؋ : Auto Focus Frame

(p.42)

، : Voice memo (p.43)

ڹ : Optical / Digital Zoom bar / Digital Zoom rate (p.23)

ں 10 : Number of available shots remaining (p.13)

00:00:00 : Available recording time

(Movie clip / Voice recording) (p.13)

ڻ : Card inserted indicator (p.12)

ڼ : Recording mode (p.16)

ڽ : Colour Effect (p.34)

ھ : Face Recognition (p.20)

ڿ : Flash (p.26)

ۀ : Self-timer (p.28)

ہ : Macro (p.25)

ۂ : Contrast (p.42)

: Mic. off (p.44)

ۃ : Sharpness (p.42)

ŝ16Ş

Starting the recording mode

ƈ You can select the desired working mode using the M

(Mode) button located on the back of the camera.

Press the M button and a menu show aside will

display. Select a desired mode by using the Smart

button.

ƈ Mode icons

Selecting modes

AUTO PROGRAM MOVIE ASR

PMP MP3 TEXT VIEWER

SCENE

SHOOTING

MULTIMEDIA

Mode



NIGHT

PORTRAIT CHILDREN

LANDSCAPE

CLOSE-UP

TEXT

SUNSET

DAWN

BACK

LIGHT

FIRE

WORKS

BEACH

&SNOW

SELF

SHOT

FOOD

CAFE

ŝ17Ş

Starting the recording mode

ƈ How to use the PROGRAM mode ( )

Selecting the program mode will configure the

camera with optimal settings.

You can still manually configure all functions

except the aperture value and shutter speed.

1. Select the Program mode by pressing the

Mode button.

2. Press the menu button to configure advanced

functions such as image size, quality, effects,

sharpness, metering and etc. (p.29~44)

ƈ How to use the AUTO mode ( )

Please select this mode for quick and easy picture taking with minimal user

interaction.

[AUTO mode]

ƃ If the auto focus frame turns to red when you press the shutter button down

half way, it means that the camera cannot focus on the subject. Should this

be the case, the camera is unable to capture an image clearly.

INFORMATION

1. Insert the battery (p.11) taking note of the

correct polarity (+ / -).

2. Insert the memory card (p.11). As this camera

has a 10MB internal memory, it is not essential

to insert the memory card.

If the memory card is not inserted, an image

will be stored in the internal memory.

If the memory card is inserted, an image will be

stored on the memory card.

3. Close the battery chamber cover.

4. Press the power button to turn on the camera.

(If the date / time that is displayed on the LCD monitor is incorrect, reset the

date / time before taking a picture.)

5. Select the Auto mode by pressing the Mode button (p.16, 29).

6. Point the camera towards the subject and compose the image.

7. Press the shutter button to capture an image.

[PROGRAM mode]

ƈ How to use the MOVIE CLIP mode ( )

A movie clip can be recorded for as long as the

available recording time of the memory capacity

allows. (Min. 2 sec - Max. 1 hour)

1. Select the MOVIE CLIP mode by pressing the

mode button. (Available recording time will

display on the LCD monitor)

2. Point the camera towards the subject and

compose the image by using the LCD monitor.

Press the shutter button and movie clips are

recorded for as long as the available recording time allows.

Movie clips will still be recorded if the shutter button is released.

If you wish to stop recording, press the shutter button again.

* Image size and type are listed below.

- Image size : 640x480, 320x240 (Selectable)

- File type : *.avi (MPEG-4)

ſ You can record the movie without voice. (p.44)

[MOVIE CLIP mode]

ŝ18Ş

Starting the recording mode

ƈ How to use the ASR (Advanced Shake Reduction) mode ( )

This mode will reduce the effect of camera shake and help you get a well-

exposed image in dim conditions. Press the ASR button.

ƃ Things to watch out for using the ASR mode

1. The digital zoom will not operate in the ASR

mode.

2. If the lighting conditions are brighter than

fluorescent lighting condition, the ASR doesn’t

activate.

3. If the lighting condition is darker than in

fluorescent lighting condition, camera shake

warning indicator ( ) will display.

For best results only take pictures in situations where the camera shake

warning indicator ( ) is not displayed.

4. If the subject is moving the final image captured may be blurred.

5. Avoid moving the camera while the [Capturing!] message is displayed to

achieve a better result.

6. As the ASR uses the camera’s digital processor, images taken using the ASR

may take a little longer for the camera to process.

[ASR mode]

ƈ Pausing while recording a movie clip (Successive Recording)

This camera allows you to temporarily stop during unwanted scenes, while

recording a movie clip. Using this function, you can record your favourite scenes

into a movie clip without having to create multiple movie clips.

ƃ Using Successive Recording

1. Press the shutter button and movie clips are

recorded for as long as the available recording

time. Movie clips will still be recorded if the

shutter button is released.

2. Press the Pause button to pause recording.

Press the Pause button again to resume the

recording.

3. If you wish to stop recording, press the shutter

button again.

REC

ŝ19Ş

Starting the recording mode

ƈ How to use the SCENE mode ( )

Use the menu to easily configure optimal settings

for a variety of shooting situations.

- Select the Scene mode by pressing the Mode

button.

- Press the Menu button to select a desired scene

menu. (p.44)

ƈ Wise Shot

Two images are taken at a time. One is taken in the Fill-In Flash mode and the

other is taken in the ASR mode. You can select and save only one of the

images.

ƃ How to use the Wise Shot

1. Select the ASR mode by pressing the mode

button.

2. Press the Fn button. (p.30)

3. Select the ( ) menu.

4. Press the Shutter button to capture images

- Two images are captured in succession.

ƃ In the Wise shot mode, the shutter speed value shown on the LCD monitor

may be different with the real shutter speed.

INFORMATION

Wise Shot

[SCENE mode]

ſ The scene modes are listed below.

[Nightscene] ( ) : Use this for shooting still images at night or in other

dark conditions.

[Portrait] ( ) : To take a picture of a person.

[Children] ( ) : To take a picture of fast moving objects, for

example, children.

[Landscape] ( ) : To take pictures of distant scenery.

[Close up] ( ) : Close-up shooting for small objects such as plants

and insects.

[Text] ( ) : Use this mode to shoot a document.

[Sunset] ( ) : For taking pictures of sunsets.

[Dawn] ( ) : Daybreak scenes.

[Backlight] ( ) : For portraits without shadows caused by

backlighting.

[Firework] ( ) : Firework scenes.

[Beach&Snow] ( ) : For ocean, lake, beach and snowscape scenes.

[Self Shot] ( ) : Use when the photographer would also like to be in

the image.

[Food] ( ) : For taking delicious looking food.

[Café] ( ) : For taking pictures of cafe and restaurant.

Page is loading ...

Samsung LANDIAO I70 User manual

Samsung LANDIAO I70 User manual

Related papers

Other documents