Lenovo 74506BU User manual

ThinkPad

®

X200 and X200s

Hard ware Maintenance Manual

ThinkPad

®

X200 and X200s

Hard ware Maintenance Manual

Note

Before using this information and the product it supports, be sure to read the general information under “Notices” on page

197.

Fourth Edition (December 2008)

LENOVO products, data, computer software, and services have been developed exclusively at private expense and

are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted

rights to use, reproduction and disclosure.

LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered

pursuant a General Services Administration ″GSA″ contract, use, reproduction, or disclosure is subject to restrictions

set forth in Contract No. GS-35F-05925.

Contents

About this manual . . . . . . . . . .v

Safety information . . . . . . . . . .1

General safety . . . . . . . . . . . . . .2

Electrical safety . . . . . . . . . . . . .3

Safety inspection guide . . . . . . . . . . .5

Handling devices that are sensitive to electrostatic

discharge . . . . . . . . . . . . . . .6

Grounding requirements . . . . . . . . . .6

Safety notices: multilingual translations . . . . .7

Laser compliance statement . . . . . . . . .14

Important service information . . . . .17

Strategy for replacing FRUs . . . . . . . . .17

Strategy for replacing a hard disk drive . . . .18

Important notice for replacing a system board . .18

How to use error message . . . . . . . .18

Strategy for replacing FRUs for CTO, CMV, and

GAV . . . . . . . . . . . . . . . . .19

Product definition . . . . . . . . . . .19

FRU identification for CTO, CMV, and GAV

products . . . . . . . . . . . . . .19

Important information about replacing RoHS

compliant FRUs . . . . . . . . . . . . .21

General checkout . . . . . . . . . .23

What to do first . . . . . . . . . . . . .24

Checkout guide . . . . . . . . . . . . .25

Diagnostics using PC-Doctor for DOS . . . .26

PC-Doctor for Windows . . . . . . . . .28

PC-Doctor for Rescue and Recovery . . . . .28

Power system checkout . . . . . . . . . .29

Checking the ac adapter . . . . . . . . .29

Checking operational charging . . . . . . .30

Checking the battery pack . . . . . . . .30

Checking the backup battery . . . . . . .31

Related service information . . . . . .33

Restoring the factory contents by using Product

Recovery discs . . . . . . . . . . . . .33

Passwords . . . . . . . . . . . . . . .34

Power-on password . . . . . . . . . .34

Hard-disk password . . . . . . . . . .34

Supervisor password . . . . . . . . . .34

How to remove the power-on password . . . .35

How to remove the hard-disk password . . . .35

Power management . . . . . . . . . . .37

Screen blank mode . . . . . . . . . . .37

Standby mode . . . . . . . . . . . .37

Hibernation mode . . . . . . . . . . .38

Symptom-to-FRU index . . . . . . . . . .39

Numeric error codes . . . . . . . . . .39

Error messages . . . . . . . . . . . .43

Beep symptoms . . . . . . . . . . . .44

No-beep symptoms . . . . . . . . . . .44

LCD-related symptoms . . . . . . . . .45

Intermittent problems . . . . . . . . . .46

Undetermined problems . . . . . . . . .46

ThinkPad X200 and X200s . . . . . .47

Specifications . . . . . . . . . . . . . .48

Status indicators . . . . . . . . . . . . .51

FRU tests . . . . . . . . . . . . . . .53

Fn key combinations . . . . . . . . . . .55

FRU replacement notices . . . . . . . . . .58

Screw notices . . . . . . . . . . . . .58

Retaining serial numbers . . . . . . . . .59

Removing and replacing a FRU . . . . . . . .62

Before servicing ThinkPad X200 and X200s . . .63

1010 Battery pack . . . . . . . . . . .64

1020 Hard disk drive (HDD) cover, HDD, and

HDD rubber rails or solid state drive (SSD) and

storage converter . . . . . . . . . . .65

1030 DIMM . . . . . . . . . . . . .69

1040 Keyboard . . . . . . . . . . . .71

1050 Palm rest or palm rest with fingerprint

reader . . . . . . . . . . . . . . .74

1060 Backup battery . . . . . . . . . .77

1070 PCI Express Mini Card for wireless LAN . .79

1080 PCI Express Mini Card for wireless WAN 83

1090 Intel Turbo Memory Minicard or wireless

USB adapter . . . . . . . . . . . . .85

1100 Keyboard bezel . . . . . . . . . .87

1110 Speaker assembly . . . . . . . . . .88

1120 I/O card assembly . . . . . . . . .89

1130 LCD assembly . . . . . . . . . . .91

1140 Base cover assembly . . . . . . . . .95

1150 Systemboard, DC-in connector, fan, and

ExpressCard slot assembly . . . . . . . . 101

2010 LCD front bezel . . . . . . . . . .110

2020 Inverter card . . . . . . . . . . .113

2030 Bluetooth daughter card (BDC-2.1) . . .114

2040 Integrated camera . . . . . . . . .115

2050 LCD panel, LCD brackets, and LCD cable 116

2060 Hinges and hinge brackets . . . . . . 122

2070 LCD rear cover and wireless antenna

cables . . . . . . . . . . . . . . . 125

Locations . . . . . . . . . . . . . . . 131

Front view . . . . . . . . . . . . . 131

Rear view . . . . . . . . . . . . . 132

Bottom view . . . . . . . . . . . . . 133

Rear view (ThinkPad X200 UltraBase) . . . . 134

Bottom view (ThinkPad X200 UltraBase) . . . 135

Parts list . . . . . . . . . . . . . . . 136

Overall . . . . . . . . . . . . . . 137

LCD FRUs . . . . . . . . . . . . . 171

Keyboard . . . . . . . . . . . . . . 184

Miscellaneous parts . . . . . . . . . . 185

AC adapters . . . . . . . . . . . . . 185

Power cords . . . . . . . . . . . . . 186

Recovery discs . . . . . . . . . . . . 187

Common service tools . . . . . . . . . 195

Notices . . . . . . . . . . . . . . 197

Trademarks . . . . . . . . . . . . . . 198

iv ThinkPad X200 and X200s Hardware Maintenance Manual

About this manual

This manual contains service and reference information for the following

ThinkPad

®

products.

ThinkPad X200

MT 7454, 7455, 7457, 7458, 7459, 2023, and 2024

ThinkPad X200s

MT 7462, 7465, 7466, 7469, 7470, 2046, and 2047

Use this manual along with the advanced diagnostic tests to troubleshoot

problems.

The manual is divided into sections as follows:

v The common sections provide general information, guidelines, and safety

information required in servicing computers.

v The product-specific section includes service, reference, and product-specific

parts information.

Important:

This manual is intended only for trained servicers who are familiar with

ThinkPad products. Use this manual along with the advanced diagnostic tests to

troubleshoot problems effectively.

Before servicing a ThinkPad product, be sure to read all the information under

“Safety information” on page 1 and “Important service information” on page 17.

vi ThinkPad X200 and X200s Hardware Maintenance Manual

Safety information

This chapter presents following safety information that you need to be familiar

with before you service a ThinkPad computer.

v “General safety” on page 2

v “Electrical safety” on page 3

v “Safety inspection guide” on page 5

v “Handling devices that are sensitive to electrostatic discharge” on page 6

v “Grounding requirements” on page 6

v “Safety notices: multilingual translations” on page 7

v “Laser compliance statement” on page 14

General safety

Follow these rules to ensure general safety:

v Observe good housekeeping in the area of the machines during and after

maintenance.

v When lifting any heavy object:

1. Make sure that you can stand safely without slipping.

2. Distribute the weight of the object equally between your feet.

3. Use a slow lifting force. Never move suddenly or twist when you attempt to

lift.

4. Lift by standing or by pushing up with your leg muscles; this action removes

the strain from the muscles in your back. Do not attempt to lift any object that

weighs more than 16 kg (35 lb) or that you think is too heavy for you.

v Do not perform any action that causes hazards to the customer, or that makes

the equipment unsafe.

v Before you start the machine, make sure that other service representatives and

the customer’s personnel are not in a hazardous position.

v Place removed covers and other parts in a safe place, away from all personnel,

while you are servicing the machine.

v Keep your toolcase away from walk areas so that other people will not trip over

it.

v Do not wear loose clothing that can be trapped in the moving parts of a

machine. Make sure that your sleeves are fastened or rolled up above your

elbows. If your hair is long, fasten it.

v Insert the ends of your necktie or scarf inside clothing or fasten it with a

nonconductive clip, about 8 centimeters (3 inches) from the end.

v Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your

clothing.

Attention: Metal objects are good electrical conductors.

v Wear safety glasses when you are hammering, drilling, soldering, cutting wire,

attaching springs, using solvents, or working in any other conditions that might

be hazardous to your eyes.

v After service, reinstall all safety shields, guards, labels, and ground wires.

Replace any safety device that is worn or defective.

v Reinstall all covers correctly before returning the machine to the customer.

v Fan louvers on the machine help to prevent overheating of internal components.

Do not obstruct fan louvers or cover them with labels or stickers.

2 ThinkPad X200 and X200s Hardware Maintenance Manual

Electrical safety

Observe the following rules when working on electrical equipment.

v Find the room emergency power-off (EPO) switch, disconnecting switch, or

electrical outlet. If an electrical accident occurs, you can then operate the switch

or unplug the power cord quickly.

v Do not work alone under hazardous conditions or near equipment that has

hazardous voltages.

v Disconnect all power before:

– Performing a mechanical inspection

– Working near power supplies

– Removing or installing main units

v Before you start to work on the machine, unplug the power cord. If you cannot

unplug it, ask the customer to power-off the wall box that supplies power to the

machine, and to lock the wall box in the off position.

v If you need to work on a machine that has exposed electrical circuits, observe the

following precautions:

– Ensure that another person, familiar with the power-off controls, is near you.

Attention: Another person must be there to switch off the power, if

necessary.

– Use only one hand when working with powered-on electrical equipment;

keep the other hand in your pocket or behind your back.

Attention: An electrical shock can occur only when there is a complete

circuit. By observing the above rule, you may prevent a current from passing

through your body.

– When using testers, set the controls correctly and use the approved probe

leads and accessories for that tester.

– Stand on suitable rubber mats (obtained locally, if necessary) to insulate you

from grounds such as metal floor strips and machine frames.

Observe

the special safety precautions when you work with very high voltages;

Instructions for these precautions are in the safety sections of maintenance

information. Use extreme care when measuring high voltages.

v Regularly inspect and maintain your electrical hand tools for safe operational

condition.

v Do not use worn or broken tools and testers.

v Never assume that power has been disconnected from a circuit. First, check that it

has been powered off.

v Always look carefully for possible hazards in your work area. Examples of these

hazards are moist floors, nongrounded power extension cables, power surges,

and missing safety grounds.

Important:

Use only approved tools and test equipment. Some hand tools have handles

covered with a soft material that does not insulate you when working with live

electrical currents.

Many customers have, near their equipment, rubber floor mats that contain small

conductive fibers to decrease electrostatic discharges. Do not use this type of mat

to protect yourself from electrical shock.

Safety information 3

v Do not touch live electrical circuits with the reflective surface of a plastic dental

mirror. The surface is conductive; such touching can cause personal injury and

machine damage.

v Do not service the following parts with the power on when they are removed

from their normal operating places in a machine:

– Power supply units

– Pumps

– Blowers and fans

– Motor generators

and similar units. (This practice ensures correct grounding of the units.)

v If an electrical accident occurs:

– Use caution; do not become a victim yourself.

– Switch off power.

– Send another person to get medical aid.

4 ThinkPad X200 and X200s Hardware Maintenance Manual

Safety inspection guide

The purpose of this inspection guide is to assist you in identifying potentially

unsafe conditions. As each machine was designed and built, required safety items

were installed to protect users and service personnel from injury. This guide

addresses only those items. You should use good judgment to identify potential

safety hazards due to attachment of non-ThinkPad features or options not covered

by this inspection guide.

If any unsafe conditions are present, you must determine how serious the apparent

hazard could be and whether you can continue without first correcting the

problem.

Consider these conditions and the safety hazards they present:

v Electrical hazards, especially primary power (primary voltage on the frame can

cause serious or fatal electrical shock)

v Explosive hazards, such as a damaged CRT face or a bulging capacitor

v Mechanical hazards, such as loose or missing hardware

To

determine whether there are any potentially unsafe conditions, use the

following checklist at the beginning of every service task. Begin the checks with

the power off, and the power cord disconnected.

Checklist:

1. Check exterior covers for damage (loose, broken, or sharp edges).

2. Power off the computer. Disconnect the power cord.

3. Check the power cord for:

a. A third-wire ground connector in good condition. Use a meter to measure

third-wire ground continuity for 0.1 ohm or less between the external

ground pin and the frame ground.

b. The power cord should be the type specified in the parts list.

c. Insulation must not be frayed or worn.

4. Check for cracked or bulging batteries.

5. Remove the cover.

6. Check for any obvious non-ThinkPad alterations. Use good judgment as to the

safety of any non-ThinkPad alterations.

7. Check inside the unit for any obvious unsafe conditions, such as metal filings,

contamination, water or other liquids, or signs of fire or smoke damage.

8. Check for worn, frayed, or pinched cables.

9. Check that the power-supply cover fasteners (screws or rivets) have not been

removed or tampered with.

Safety information 5

Handling devices that are sensitive to electrostatic discharge

Any computer part containing transistors or integrated circuits (ICs) should be

considered sensitive to electrostatic discharge (ESD.) ESD damage can occur when

there is a difference in charge between objects. Protect against ESD damage by

equalizing the charge so that the machine, the part, the work mat, and the person

handling the part are all at the same charge.

When handling ESD-sensitive parts:

v Keep the parts in protective packages until they are inserted into the product.

v Avoid contact with other people.

v Wear a grounded wrist strap against your skin to eliminate static on your body.

v Prevent the part from touching your clothing. Most clothing is insulative and

retains a charge even when you are wearing a wrist strap.

v Use the black side of a grounded work mat to provide a static-free work surface.

The mat is especially useful when handling ESD-sensitive devices.

v Select a grounding system, such as those listed below, to provide protection that

meets the specific service requirement.

– Attach the ESD ground clip to any frame ground, ground braid, or green-wire

ground.

– When working on a double-insulated or battery-operated system, use an ESD

common ground or reference point. You can use coax or connector-outside

shells on these systems.

– Use the round ground prong of the ac plug on ac-operated computers.

Grounding requirements

Electrical grounding of the computer is required for operator safety and correct

system function. Proper grounding of the electrical outlet can be verified by a

certified electrician.

Notes:

1. Use product-specific ESD procedures when they exceed the requirements

noted here.

2. Make sure that the ESD protective devices you use have been certified (ISO

9000) as fully effective.

Note:

The

use of a grounding system to guard against ESD damage is desirable but not

necessary.

6 ThinkPad X200 and X200s Hardware Maintenance Manual

Safety notices: multilingual translations

The safety notices in this section are provided in English, French, German, Hebrew,

Italian, Japanese, and Spanish.

Safety notice 1

Before the computer is powered on after FRU replacement, make sure all screws,

springs, and other small parts are in place and are not left loose inside the

computer. Verify this by shaking the computer and listening for rattling sounds.

Metallic parts or metal flakes can cause electrical shorts.

Avant de remettre l’ordinateur sous tension après remplacement d’une unité en

clientèle, vérifiez que tous les ressorts, vis et autres pièces sont bien en place et

bien fixées. Pour ce faire, secouez l’unité et assurez-vous qu’aucun bruit suspect

ne se produit. Des pièces métalliques ou des copeaux de métal pourraient causer

un court-circuit.

Bevor nach einem FRU-Austausch der Computer wieder angeschlossen wird,

muß sichergestellt werden, daß keine Schrauben, Federn oder andere Kleinteile

fehlen oder im Gehäuse vergessen wurden. Der Computer muß geschüttelt und

auf Klappergeräusche geprüft werden. Metallteile oder-splitter können

Kurzschlüsse erzeugen.

Prima di accendere l’elaboratore dopo che é stata effettuata la sostituzione di una FRU,

accertarsi che tutte le viti, le molle e tutte le altri parti di piccole dimensioni siano nella

corretta posizione e non siano sparse all’interno dell’elaboratore. Verificare ciò scuotendo

l’elaboratore e prestando attenzione ad eventuali rumori; eventuali parti o pezzetti

metallici possono provocare cortocircuiti pericolosi.

Antes de encender el sistema despues de sustituir una FRU, compruebe que todos los

tornillos, muelles y demás piezas pequeñas se encuentran en su sitio y no se encuentran

sueltas dentro del sistema. Compruébelo agitando el sistema y escuchando los posibles

ruidos que provocarían. Las piezas metálicas pueden causar cortocircuitos eléctricos.

Safety information 7

Safety notice 2

DANGER

Some standby batteries contain a small amount of nickel and cadmium. Do not

disassemble a standby battery, recharge it, throw it into fire or water, or short-circuit it.

Dispose of the battery as required by local ordinances or regulations. Use only the

battery in the appropriate parts listing. Use of an incorrect battery can result in

ignition or explosion of the battery.

Certaines batteries de secours contiennent du nickel et du cadmium. Ne les démontez

pas, ne les rechargez pas, ne les exposez ni au feu ni à l’eau. Ne les mettez pas en

court-circuit. Pour les mettre au rebut, conformez-vous à la réglementation en vigueur.

Lorsque vous remplacez la pile de sauvegarde ou celle de l’horloge temps réel, veillez

à n’utiliser que les modèles cités dans la liste de pièces détachées adéquate. Une

batterie ou une pile inappropriée risque de prendre feu ou d’exploser.

Die Bereitschaftsbatterie, die sich unter dem Diskettenlaufwerk befindet, kann

geringe Mengen Nickel und Cadmium enthalten. Sie darf nur durch die Verkaufsstelle

oder den IBM Kundendienst ausgetauscht werden. Sie darf nicht zerlegt,

wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden. Die

Batterie kann schwere Verbrennungen oder Verätzungen verursachen. Bei der

Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen der

Bereitschafts-oder Systembatterie nur Batterien des Typs verwenden, der in der

Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder

Explosion führen.

Alcune batterie di riserva contengono una piccola quantità di nichel e cadmio. Non

smontarle, ricaricarle, gettarle nel fuoco o nell’acqua né cortocircuitarle. Smaltirle

secondo la normativa in vigore (DPR 915/82, successive disposizioni e disposizioni

locali). Quando si sostituisce la batteria dell’RTC (real time clock) o la batteria di

supporto, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego di

una batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria

stessa.

Algunas baterías de reserva contienen una pequeña cantidad de níquel y cadmio. No

las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite.

Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se

encuentren en la lista de piezas. La utilización de una batería no apropiada puede

provocar la ignición o explosión de la misma.

8 ThinkPad X200 and X200s Hardware Maintenance Manual

Safety notice 3

DANGER

The battery pack contains small amounts of nickel. Do not disassemble it, throw it

into fire or water, or short-circuit it. Dispose of the battery pack as required by local

ordinances or regulations. Use only the battery in the appropriate parts listing when

replacing the battery pack. Use of an incorrect battery can result in ignition or

explosion of the battery.

La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.

Ne la mettez pas en court-circuit. Pour la mettre au rebut, conformez-vous à la

réglementation en vigueur. Lorsque vous remplacez la batterie, veillez à n’utiliser que

les modèles cités dans la liste de pièces détachées adéquate. En effet, une batterie

inappropriée risque de prendre feu ou d’exploser.

Akkus enthalten geringe Mengen von Nickel. Sie dürfen nicht zerlegt,

wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden. Bei

der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen

der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist.

Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen.

La batteria contiene piccole quantità di nichel. Non smontarla, gettarla nel fuoco o

nell’acqua né cortocircuitarla. Smaltirla secondo la normativa in vigore (DPR 915/82,

successive disposizioni e disposizioni locali). Quando si sostituisce la batteria,

utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego di una

batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa.

Las baterías contienen pequeñas cantidades de níquel. No las desmonte, ni recargue,

ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como dispone la

normativa local. Utilice sólo baterías que se encuentren en la lista de piezas al

sustituir la batería. La utilización de una batería no apropiada puede provocar la

ignición o explosión de la misma.

Safety information 9

Safety notice 4

DANGER

The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it,

remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate

it, or expose its cell contents to water. Dispose of the battery as required by local

ordinances or regulations. Use only the battery in the appropriate parts listing. Use of

an incorrect battery can result in ignition or explosion of the battery.

La pile de sauvegarde contient du lithium. Elle présente des risques d’incendie,

d’explosion ou de brûlures graves. Ne la rechargez pas, ne retirez pas son connecteur

polarisé et ne la démontez pas. Ne l’exposez pas à une temperature supérieure à 100°C,

ne la faites pas brûler et n’en exposez pas le contenu à l’eau. Mettez la pile au rebut

conformément à la réglementation en vigueur. Une pile inappropriée risque de

prendre feu ou d’exploser.

Die Systembatterie ist eine Lithiumbatterie. Sie kann sich entzünden, explodieren

oder schwere Verbrennungen hervorrufen. Batterien dieses Typs dürfen nicht

aufgeladen, zerlegt, über 100 C erhitzt oder verbrannt werden. Auch darf ihr Inhalt

nicht mit Wasser in Verbindung gebracht oder der zur richtigen Polung angebrachte

Verbindungsstecker entfernt werden. Bei der Entsorgung die örtlichen Bestimmungen

für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien des Typs

verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien

kann zu Entzündung oder Explosion führen.

La batteria di supporto e una batteria al litio e puo incendiarsi, esplodere o procurare

gravi ustioni. Evitare di ricaricarla, smontarne il connettore polarizzato, smontarla,

riscaldarla ad una temperatura superiore ai 100 gradi centigradi, incendiarla o gettarla

in acqua. Smaltirla secondo la normativa in vigore (DPR 915/82, successive

disposizioni e disposizioni locali). L’impiego di una batteria non adatta potrebbe

determinare l’incendio o l’esplosione della batteria stessa.

La batería de repuesto es una batería de litio y puede provocar incendios, explosiones

o quemaduras graves. No la recargue, ni quite el conector polarizado, ni la desmonte,

ni caliente por encima de los 100°C (212°F), ni la incinere ni exponga el contenido de

sus celdas al agua. Deséchela tal como dispone la normativa local.

10 ThinkPad X200 and X200s Hardware Maintenance Manual

Safety notice 5

If the LCD breaks and the fluid from inside the LCD gets into your eyes or on

your hands, immediately wash the affected areas with water for at least 15

minutes. Seek medical care if any symptoms from the fluid are present after

washing.

Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les

yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au

moins quinze minutes. Consultez un médecin si des symptômes persistent après

le lavage.

Die Leuchtstoffröhre im LCD-Bildschirm enthält Quecksilber. Bei der Entsorgung

die örtlichen Bestimmungen für Sondermüll beachten. Der LCD-Bildschirm

besteht aus Glas und kann zerbrechen, wenn er unsachgemäß behandelt wird

oder der Computer auf den Boden fällt. Wenn der Bildschirm beschädigt ist und

die darin befindliche Flüssigkeit in Kontakt mit Haut und Augen gerät, sollten

die betroffenen Stellen mindestens 15 Minuten mit Wasser abgespült und bei

Beschwerden anschließend ein Arzt aufgesucht werden.

Nel caso che caso l’LCD si dovesse rompere ed il liquido in esso contenuto entrasse in

contatto con gli occhi o le mani, lavare immediatamente le parti interessate con acqua

corrente per almeno 15 minuti; poi consultare un medico se i sintomi dovessero

permanere.

Si la LCD se rompe y el fluido de su interior entra en contacto con sus ojos o sus manos,

lave inmediatamente las áreas afectadas con agua durante 15 minutos como mínimo.

Obtenga atención medica si se presenta algún síntoma del fluido despues de lavarse.

Safety information 11

Safety notice 6

DANGER

To avoid shock, do not remove the plastic cover that protects the lower part of the

inverter card.

Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique

protégeant la partie inférieure de la carte d’alimentation.

Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der

Spannungswandlerplatine umgibt, nicht entfernen.

Per evitare scosse elettriche, non rimuovere la copertura in plastica che avvolge la

parte inferiore della scheda invertitore.

Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la

tarjeta invertida.

Safety notice 7

DANGER

Though the main batteries have low voltage, a shorted or grounded battery can

produce enough current to burn personnel or combustible materials.

Bien que le voltage des batteries principales soit peu élevé, le court-circuit ou la mise

à la masse d’une batterie peut produire suffisamment de courant pour brûler des

matériaux combustibles ou causer des brûlures corporelles graves.

Obwohl Hauptbatterien eine niedrige Spannung haben, können sie doch bei

Kurzschluß oder Erdung genug Strom abgeben, um brennbare Materialien zu

entzünden oder Verletzungen bei Personen hervorzurufen.

Sebbene le batterie di alimentazione siano a basso voltaggio, una batteria in corto

circuito o a massa può fornire corrente sufficiente da bruciare materiali combustibili o

provocare ustioni ai tecnici di manutenzione.

Aunque las baterías principales tienen un voltaje bajo, una batería cortocircuitada o

con contacto a tierra puede producir la corriente suficiente como para quemar material

combustible o provocar quemaduras en el personal.

12 ThinkPad X200 and X200s Hardware Maintenance Manual

Page is loading ...

Lenovo 74506BU User manual

Lenovo 74506BU User manual

Related papers

Other documents