Harbor Freight Tools Vacuum Storage Bags, Set of Three User manual
- Category
- Vacuum sealers
- Type
- User manual
STORAGE SPACE BAGS
4-PIECE SET
Model
95613
OPERATION INSTRUCTIONS
GENERAL AND SPECIFIC SAFETY RULES
READ, UNDERSTAND AND SAVE ALL INSTRUCTIONS
SUFFOCATION HAZARD! 1. Keep bags out of the reach of children.
Maintain labels on Storage Bags . 2. These carry important information. If unread-
able or missing, contact Harbor Freight Tools for replacement.
Store in a dry and secure location out of the reach of children. 3.
Use for intended purposes only. 4. Do not modify Storage Bags to use for any task
another than for storage.
Read manual of vacuum cleaner used with Storage Bag. 5. Follow all warnings,
precautions and operating instructions for the vacuum used with Storage Bags.
Please note: vacuum storage may damage fragile objects.6.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Page 2SKU 95613
For technical questions, please call 1-800-444-3353.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
CONTENTS
The set contains one large bag and three medium bags. The bags are made from
durable Polyethylene and Nylon.
OPERATING INSTRUCTIONS
1. Select the appropriate-sized bag for the desired items.
2. Peel open the top of the Storage Bag and slide items to be stored into the Storage
Bag. Please note: It is best to fold any linens or clothes so that you can fit as much
as possible into the Storage Bag.
3. Once the Storage Bag is full, seal the top by using the zipper strip. Line up the two
sides of the strip and press down hard as you seal the bag. This will ensure that
the Storage Bag is air-tight.
4. Open the white nozzle cap on the side of the bag. Press the nozzle of the vacuum
(not included) over the white nozzle of the Storage Bag.
5. Turn on the vacuum. The vacuum will suck the air out of the bag, which will com-
press the bag as well as the items stored inside the bag.
6. Once the bag is compressed, place the white nozzle cap over the nozzle. This will
help keep any additional air from entering the bag.
7. Store the compressed Storage Bags in a dry and secure area. To open, simply
unzip the zipper. As air enters the Storage Bag, it will expand; making it easier to
remove the items from the Storage Bag.
REPLACEMENT PARTS ARE NOT AVAILABLE FOR THIS ITEM
REV 09e
-
1
-
2
Harbor Freight Tools Vacuum Storage Bags, Set of Three User manual
- Category
- Vacuum sealers
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Chicago Electric 96325 User manual
-
Harbor Freight Tools 70 gallon 2 HP High Flow High Capacity Dust Collector Owner's manual
-
Pittsburgh Automotive 12Volt Owner's manual
-
-
-
-
-
Drill Master 96289 User manual
-
-
Other documents
-
-
-
-
Central Machinery 5 gallon Wet/Dry Vacuum/Blower Owner's manual
-
Central Pneumatic 66399 Air Compressor Owner's manual
-
-
-
-
-