2. Vehicles & accessories
  3. Motor vehicle accessories & components
  4. Motorcycle Accessories
  5. OMIX
  6. 19101.04

OMIX 19101.04 Installation guide

  • I have reviewed the installation instructions for the Quadratec Wiper Motor Kits, specifically models 19101.03, 19101.02, and 19101.04. The document details the wiring connections, including the S, -, and + terminals, and the correct way to connect them to your vehicle's electrical system. I'm ready to assist you with any questions you might have regarding these installation instructions.
  • Where should the 'S' terminal be connected?
    Where should the '-' terminal be connected?
    What fuse rating is recommended for the '+' terminal connection?
WIPER MOTOR KIT INSTALLATION INSTRUCTIONS
P/N: 19101.03 (12V-ST) 12Volt Stainless Steel
19101.02 (12V) 12 Volt Kit - Black
19101.04 (24V) 24 Volt Kit – Black
Installation Notes: The S terminal should be connected to one side of
the control switch. The other lead wire from the
switch will need to be grounded.
The – terminal should be connected to a good
ground on the vehicle chassis or to the battery’s
negative terminal.
The + terminal should be connected to the original
fused wiper motor wire or fused battery positive
wire. Use a 10amp fuse if a new wire assemble is
to be used.
Date: 5/19/06
/