PAIRING TO THE APP
PAIRING:
1. Plug the supplied USB power cable into a 5V (1A
minimum) USB power adapter (not supplied) and
the jack end into the STARLITE input on the bottom
of the device.
2. The STARLITE will automatically turn on.
3. Press the Switch button to turn the STARLITE off.
4. Press and hold down the Switch button and wait
for a white ash to appear. Then release the Switch
button.
5. A red blinking light will appear ready for pairing.
(Red blinking light will time out if not attended)
6. Open up the SMART LIFE APP and the APP will
auto detect the STARLITE device (FIG:1).
7. Press on “ADD” for the device to be added.
8. Accept any prompts that appear ie:“permissions”.
9. Enter WiFi name & password of your home WiFi.
Press “NEXT” (FIG:2).
10.Wait for the device to be added to the APP (FIG:3).
11.Once completed press “NEXT” (FIG:4) and then
the controls for the colour adjustment appears.
6
PAIRING TO THE APP