ATEN CS1644A-DoD User manual

USB DVI Dual View KVMP Switch

CS1642A / CS1644A

User Manual

www.aten.com

VM5808H User Manual

ii

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this

equipment.

CE Warning: This is a class A product. In a domestic environment this

product may cause radio interference in which case the user may be required to

take adequate measures.

RoHS

This product is RoHS compliant.

SJ/T 11364-2006

The following contains information that relates to China.

VM5808H User Manual

iii

User Information

Online Registration

Be sure to register your product at our online support center:

Telephone Support

For telephone support, call this number:

User Notice

All information, documentation, and specifications contained in this manual

are subject to change without prior notification by the manufacturer. The

manufacturer makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties as to merchantability or fitness for any particular purpose. Any of

the manufacturer's software described in this manual is sold or licensed as is.

Should the programs prove defective following their purchase, the buyer (and

not the manufacturer, its distributor, or its dealer), assumes the entire cost of all

necessary servicing, repair and any incidental or consequential damages

resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV

interference caused by unauthorized modifications to this device. It is the

responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation

of this system if the correct operational voltage setting was not selected prior

to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS

CORRECT BEFORE USE.

International http://eservice.aten.com

International 886-2-8692-6959

China 86-10-5255-0110

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

United Kingdom 44-8-4481-58923

VM5808H User Manual

iv

Package Contents

The CS1642A / CS1644A package consists of:

1 CS1642A / CS1644A USB DVI Dual View KVMP Switch

2 Custom USB DVI-D Dual Link Cables Sets (CS1642A)

2 Custom DVI-D Dual Link Cables (CS1642A)

4 Custom USB DVI-D Dual Link Cable Sets (CS1644A)

4 Custom DVI-D Dual Link Cables (CS1644A)

1 Power Adapter

1 User Instructions*

Check to make sure that all the components are present and that nothing got

damaged in shipping. If you encounter a problem, contact your dealer.

Read this manual thoroughly and follow the installation and operation

procedures carefully to prevent any damage to the unit, and/or any of the

devices connected to it.

*Features may have been added to the CS1642A / CS1644A since this manual

was published. Please visit our website to download the most up-to-date

version of the manual.

Manual Part No. PAPE-0303-AT4G

Manual Date: 2014-07-22

All other brand names and trademarks are the registered property of their respective owners.

VM5808H User Manual

v

Contents

EMC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii

RoHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii

SJ/T 11364-2006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii

User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

Online Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

User Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii

Product Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii

Chapter 1.

Introduction

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Computers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

CS1642A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

CS1644A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

CS1642A Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

CS1642A LED Status Panel Detail . . . . . . . . . . . . . . . . . . . . . . . . .7

CS1644A Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

CS1644A LED Status Panel Detail . . . . . . . . . . . . . . . . . . . . . . . . .8

CS1642A Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

CS1644A Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 2.

Hardware Setup

Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Installation Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Quad-View (DCC Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Quad-View Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Chapter 3.

Basic Operation

Manual Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Hot Plugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Powering Off and Restarting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Port ID Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

VM5808H User Manual

vi

Chapter 4.

Keyboard Port Operation

Port Switching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Cycling Through the Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Going Directly to a Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Auto Scanning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Hotkey Setting Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Invoking HSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Alternate HSM Invocation Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Alternate Port Switching Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Keyboard Operating Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

List Switch Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

USB Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Hotkey Beeper Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Disable Port Switching Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Firmware Upgrade Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Restore Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Video DynaSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Keyboard Emulation Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Mouse Emulation Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Mouse Port Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

SPC Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Front Panel Pushbutton 1 and 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Front Panel Pushbutton 3 and 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

HSM Summary Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Chapter 5.

Keyboard Emulation

Mac Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Sun Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Chapter 6.

The Firmware Upgrade Utility

Before you Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Starting the Upgrade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Upgrade Succeeded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Upgrade Failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Appendix

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

VM5808H User Manual

vii

About this Manual

This User Manual is provided to help you get the most from your system. It

covers all aspects of installation, configuration and operation. An overview of

the information found in the manual is provided below.

Chapter 1, Introduction, introduces you to the CS1642A / CS1644A

system. Its purpose, features and benefits are presented, and its front and back

panel components are described.

Chapter 2, Hardware Setup, describes how to set up your installation.

Diagrams showing the necessary steps for a single or daisy chain setup are

provided.

Chapter 3, Basic Operation, explains the fundamental concepts involved

in operating the CS1642A / CS1644A.

Chapter 4, Keyboard Port Operation, details all of the concepts and

procedures involved in the keyboard hotkey operation of your CS1642A /

CS1644A installation.

Chapter 5, Keyboard Emulation, provides tables that list the PC to Mac

and PC to Sun keyboard emulation mappings.

Chapter 6, The Firmware Upgrade Utility, explains how to use this

utility to upgrade the CS1642A / CS1644A's firmware with the latest available

versions.

An Appendix, provides specifications and other technical information

regarding the CS1642A / CS1644A.

VM5808H User Manual

viii

Conventions

This manual uses the following conventions:

Product Information

For information about all ATEN products and how they can help you connect

without limits, visit ATEN on the Web or contact an ATEN Authorized

Reseller. Visit ATEN on the Web for a list of locations and telephone numbers:

Monospaced Indicates text that you should key in.

[ ] Indicates keys you should press. For example, [Enter] means to

press the Enter key. If keys need to be chorded, they appear

together in the same bracket with a plus sign between them:

[Ctrl+Alt].

1. Numbered lists represent procedures with sequential steps.

♦Bullet lists provide information, but do not involve sequential steps.

→Indicates selecting the option (on a menu or dialog box, for

example), that comes next. For example, Start → Run means to

open the Start menu, and then select Run.

Indicates critical information.

International http://www.aten.com

North America http://www.aten-usa.com

1

Chapter 1

Introduction

Overview

The CubiQ CS1642A / CS1644A USB DVI Dual View KVMP Switch charts a

revolutionary new direction in KVM (Keyboard, Video, Mouse) switch

functionality by combining a 2/4-port KVM switch with a 2-port USB hub at

the same time as providing dual-screen support for two DVI displays, making

it ideal for graphic designers, banking and finance consultants, medical

applications, and gamers. The CS1642A / CS1644A supports 2.1 channel

surround sound to give a theater digital audio experience that enlivens video

playback.

As a KVM switch, it allows users to access four computers with dual-screen

support from a single USB keyboard, USB mouse, and dual-screen console. As

a USB hub, it permits each computer to access any peripherals connected to the

hub on a “one computer at a time” basis. In addition, the Quad Display feature

allows two CS1642A / CS1644A units to be Daisy Chained to add a second

dual-screen setup to your installation, expanding the multi-view KVM console

setup through a single connection.

The CS1642A / CS1644A’s independent (asynchronous) switching feature

allows the KVM focus to be on one computer while the USB peripheral focus

is on another. This eliminates the need to purchase a separate USB hub as well

as the need to purchase separate stand-alone peripheral sharers.

The CS1642A / CS1644A further improves on previous designs with DVI

(Digital Visual Interface) connectors, and the transfer of keyboard and mouse

data to the computers via a fast, reliable USB connection. DVI supports both

digital video input (flat panel displays, data projectors, plasma displays, digital

TVs and set-top boxes) and analog video input (traditional monitors and TVs).

CS1642A / CS1644A User Manual

2

In addition to the CS1642A / CS1644A’s 2.1 channel surround sound

functionality, a single microphone can provide audio input to each of the

computers, and you can listen to the audio output of each computer on a single

set of speakers (on a one-at-a-time basis). As with the USB peripherals, the

audio focus can be independent of the KVM focus.

Setup is fast and easy; simply plug cables into their appropriate ports. There is

no software to configure, no installation routines, and no incompatibility

problems. Since the CS1642A / CS1644A intercepts keyboard input directly, it

will work on multiple computing platforms (PC (x86/x64), Macintosh

PowerPC, and Sun Microsystems Sparc). There are three convenient methods

to access the computers: port selection pushbuttons located on the unit’s front

panel, mouse, and hotkey combinations entered from the keyboard.

Chapter 1. Introduction

3

Features

2/4-port DVI Dual View KVMP switch with USB support and 2.1 channel

surround sound audio

One dual-screen USB console controls two/four dual-screen computers

and two additional USB devices

2-port USB hub built in

Fully compliant with the USB 2.0 specification

Full bass response provides a rich experience for 2.1 channel surround

sound systems

Independent switching of KVM, USB, and Audio focus

Multi-View – Easily connect two CS1642A/1644A's units for a second

dual-screen setup controlled through a single connection

DVI digital and analog monitor support – fully compliant with the DVI

specifications; also HDCP compliant

Superior video quality – 2560x1600 at 60Hz (DVI Dual Link); and 3D

displays up to 1920x1200 at 120Hz (DVI Dual Link)

Supports a maximum resolution of 3840 x 2400 at lower refresh rates

Supports widescreen resolutions

Computer selection via front panel pushbuttons, hotkeys, and mouse*

Customizable pushbuttons allows your favorite hotkey to be used from the

front panel

Multiplatform support – Windows 2000/XP/Vista, Linux**, Mac, Sun,

and FreeBSD

Console mouse port emulation/bypass feature supports most mouse

drivers and multifunction mice

Video DynaSync– stores the console monitors EDID (Extended Display

Identification Data) to optimize display resolution

Power On Detection - if one DVI source device is powered off, the

CS1642A / CS1644A will automatically switch to the next powered on

device

Complete keyboard emulation for error-free booting

Sun/Mac keyboard support and emulation***

(Continues on next page.)

CS1642A / CS1644A User Manual

4

(Continued from previous page.)

Multilingual keyboard mapping – Supports English, Japanese, German

and French keyboards

Auto Scan Mode for monitoring all computers

Firmware upgradable

*Mouse port switching is only workable under mouse emulation mode. For 3-

key USB wheel mouse only.

** Supports Linux Kernel 2.6 and higher. The CS1642A / CS1644A has a built-

in USB 2.0 hub, so will not support PCs or OS that do not support USB 2.0.

*** PC keyboard combinations emulate Mac keyboards.

*** Mac keyboards only work with their own computers.

Chapter 1. Introduction

5

Requirements

Console

Two DVI compatible monitors capable of the highest possible resolution

A USB mouse

A USB keyboard

Microphone and speakers

Computers

The following equipment must be available on each computer:

Two DVI ports

Four DVI ports for Quad-View (DCC Mode)

Note: The quality of the display is affected by the quality of the DVI

display cards. For best results, we recommend you purchase a high

quality product.

USB Type A port

Audio ports (optional)

Cables

CS1642A

Two custom USB DVI-D Dual Link cable sets and two DVI-D Dual Link

cables are provided in the CS1642A package.

CS1644A

Four custom USB DVI-D Dual Link cable sets and four DVI-D Dual Link

cables are provided in the CS1644A package.

CS1642A / CS1644A User Manual

6

Operating Systems

Supported operating systems are shown in the table, below:

Note: Supports Linux Kernel 2.6 and higher.

OS Version

Windows 2000 and higher

Linux RedHat 9.0 and higher; Fedora Core 4 and higher

SuSE 9.0 and higher

UNIX AIX 4.3 and higher

FreeBSD 4.2 and higher

Sun Solaris 9 and higher

Novell Netware 6.0 and higher

Mac OS 9 and higher

DOS 6.22 and higher

Chapter 1. Introduction

7

Components

CS1642A Front View

CS1642A LED Status Panel Detail

Note: The Mode Selection KVM LED icon is a monitor. The Port

Selection KVM LED icon is the Port number.

45

1

3

22

32 2

CS1642A / CS1644A User Manual

8

CS1644A Front View

CS1644A LED Status Panel Detail

1

245

32

32 2

Chapter 1. Introduction

9

No. Component Description

1 LED Status Panel This panel contains LED icons that light to indicate mode

and port status. The Mode and Port Selection Pushbuttons

have three corresponding LED icons that light to indicate

status – KVM, Audio, and USB.

2 Port Selection

Pushbuttons

For manual port selection (see Manual Switching, page 19):

To bring complete focus (audio, KVM, and USB) to a

computer, either, a) press the port selection pushbutton

that corresponds to that computer; or b) press the Mode

pushbutton once (the Mode pushbutton’s three icons light

up) and then press the port selection pushbutton that cor-

responds to that computer. All three port icons light up.

To bring only the KVM focus to a computer, press the

Mode pushbutton twice (the Mode pushbutton’s KVM

icon lights up), and then press the port selection pushbut-

ton that corresponds to that computer. The port’s KVM

icon (the port number) lights up.

To bring only the audio focus to a computer, press the

Mode pushbutton three times (the Mode pushbutton’s

audio icon lights up), and then press the port selection

pushbutton that corresponds to that computer. The port’s

audio icon lights up.

To bring only the USB focus to a computer, press the

Mode pushbutton four times (the Mode pushbutton’s

USB icon lights up), and then press the port selection

pushbutton that corresponds to that computer. The port’s

USB icon lights up.

Press and hold port selection pushbuttons 1 and 2 simul-

taneously for 2 seconds to start Auto Scan Mode (see

Auto Scanning, page 23)

Note: If a port is not selected within two seconds of the

pushing the Mode pushbutton, the Mode pushbutton will

power off.

3 Mode Selection

Pushbutton

This pushbutton allows you to cycle through the four

focus modes – complete, KVM, audio, and USB.

Press and hold Mode Selection Pushbutton before pow-

ering on the CS1642A / CS1644A to enter Firmware

Upgrade Mode.

4 Console Audio

Ports

Your console speakers and microphone plug in here.

5 USB 2.0

Peripheral Port

USB 2.0 peripherals (printers, scanners, etc.) plug in here.

CS1642A / CS1644A User Manual

10

CS1642A Rear View

CS1644A Rear View

No. Component Description

1 DCC Port

(Daisy Chain

Control)

This RJ-45 port is used to connect two CS1642A /

CS1644A units together when setting up DCC mode

for a quad view display. See Quad-View (DCC

Mode), page 16 for instructions.

2 DCC Switch This switch is used to specify the Host and Client

when setting up two CS1642A / CS1644A units in

Quad-View DCC mode. See Quad-View (DCC

Mode), page 16.

3 USB 2.0 Peripheral

Port

USB 2.0 peripherals (printers, scanners, etc.) can

plug into this port.

4 KVM Port Section The cables that link the switch to your computers

plug in here. Each KVM port section is comprised of

a microphone jack, speaker jack, USB type B socket

and two DVI-I connectors

5 Power Jack The power adapter cable plugs into this jack.

6 USB Console Ports Your USB keyboard and USB mouse plug in here.

4

3

1

56

7

2

14

56

2

7

3

Chapter 1. Introduction

11

7Console Port

Section

The cables from your monitors, microphone, and

speakers plug in here. Each connector is marked

with an appropriate icon to indicate itself.

No. Component Description

CS1642A / CS1644A User Manual

12

This Page Intentionally Left Blank

Page is loading ...

ATEN CS1644A-DoD User manual

This manual is also suitable for

ATEN CS1644A-DoD User manual

Related papers

Other documents