Ergotron 98-037-062 User guide

  • Hello! I've reviewed the User's Guide for the Ergotron Handle LX Dual Direct. This document outlines the installation and adjustment of your dual monitor mount. It also provides guidance for setting up your workstation ergonomically. I'm ready to answer your questions about this device and how to use it based on the information in the document.
  • What is the maximum weight capacity?
    What tools are needed for installation?
    How should I adjust the tension?
1 of 5
888-98-022-G-00 rev. A • 11/16
User's Guide - English
Guía del usuario - Español
Manuel de l’utilisateur - Français
Gebruikersgids - Deutsch
Benutzerhandbuch - Nederlands
Guida per l’utente - Italiano
Användarhandbok - svenska
Handle for
LX Dual Direct
ENGLISH
For the latest User Installation Guide please visit: www.ergotron.com
User's Guide
2 of 5
888-98-022-G-00 rev. A • 11/16
< 11lbs. (5 kg)
4 mm
M6 x 30mm
AB
1
1x 1x
4 mm
ID: 6.5mm
OD: 12mm
ENGLISH
Features & Speci cations
CAUTION: DO NOT EXCEED
MAXIMUM LISTED WEIGHT
CAPACITY. SERIOUS INJURY
OR PROPERTY DAMAGE MAY
OCCUR!
Components
Tools Needed
3 of 5
888-98-022-G-00 rev. A • 11/16
2x
2x
1x 2x
4 mm
M6 x 30mm
ID: 6.5mm
OD: 12mm
ENGLISH
4 of 5
888-98-022-G-00 rev. A • 11/16
ENGLISH
Adjust your mounting solution to handle the added weight.
Adjustments should move smoothly and easily through the full range of motion and stay where
you set it. If adjustments are dif cult and do not stay in the desired position, follow the instructions
to loosen or tighten the tension to create a smooth, easy adjustment motion. Depending on your
product and the adjustment, it may take several turns to notice a difference.
Adjustment Step
5 of 5
888-98-022-G-00 rev. A • 11/16
© 2016 Ergotron, Inc. All rights reserved.
ENGLISH
For local customer care phone numbers visit: http://contact.ergotron.com
For Service visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
NOTE: When contacting customer
service, reference the serial number.
Learn more about ergonomic computer use at:
www.computingcomfort.org
Set Your Workstation to Work For YOU!
Height Position top of screen slightly below eye level.
Position keyboard at about elbow height with wrists at.
Distance Position screen an arm's length from face—at least 20” (508mm).
Position keyboard close enough to create a 90˚ angle in elbow.
Angle Tilt screen to eliminate glare.
Tilt the keyboard back 10° so that your wrists remain at.
To Reduce Fatigue
Breathe - Breathe deeply through your nose.
Blink - Blink often to avoid dry eyes.
Break • 2 to 3 minutes every 20 minutes
• 15 to 20 minutes every 2 hours.
/