Warning
CHOKING HAZARD, small parts. Not suitable for children under 3 years.
Adult assembly required.
Don’t aim at face or eyes.
Parts List
Pool table board Corner ring Edge ring Pool cue Billiards & tripod
A x 1pc B x 4pcs C x 2pcs D x 2pcs E x 1 set
Brush Foot pad Screw driver Screw
F x 1pc G x 4pcs H x 1pc I x 24pcs
Assembly Instructions
Step 1. Slide the Corner ring (B) and the Edge ring (C) into the holes of the pocket, and align with the predrilled
holes on the wooden panel. Fix it with Screw (I) using the provided Screw driver (H).
Step 2. Overturn the pool table board, take the leg upside, then fix it with the preassembled bolt on the apron
board. Screw the Foot pad (G) into the nut at the bottom of the leg.
Note: If the ground is uneven, you can adjust the Foot pad to make the compact pool table stable.
FOR AU/NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.
Made in China
COMPACT POOL TABLE
Key Code: 43281220