1of3
LightSourceToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
Fixture Body
x1
F
Crossbar Assembly Fixture Body Shade&Bulb
Table of
Contents
STEP 1 STEP 3 STEP 4
Socket Collar
x1
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
STEP 2
Shade
x1
E
1BULBREQUIRED
BULBNOTINCLUDED
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
Outlet Box Screw
x2
B
Wire Connector
x3
C
Note: Socket collar shape is for illustration
purpose only. Your socket collar shape
may vary from illustration.
Installation Instructions: UQL4112
www.urbanambiance.com
2of3
STEP 1
1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to nipple
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 2
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
www.urbanambiance.com
STEP 3
STEP 4
3of3
Note: Socket collar shape is for illustration
purpose only. Your socket collar shape
may vary from illustration.
www.urbanambiance.com
/
