2. ROOMS TO GO
  3. 90260705

ROOMS TO GO 90260705 Assembly Instructions

  • Hello! I have reviewed the assembly instructions for the Lamp W26070-1. This document details the steps required to assemble the lamp, including how to connect each component in the correct order. I can assist with questions about the assembly process or any other details within the guide.
  • What parts are included in the lamp assembly?
    How do I assemble the lamp?
    What should I pay attention regarding the shade?
W26070-1
1.Take the parts carefully out of carton,
and place them on a flat surface,make sure that
the parts will not be damaged.
2.Screwing Tude B to Lamp Body A until tight,
3.Screwing Tude C to Tude B until tight,
4.Screwing Lamp Body E to Tude C until tight,
5.Remove socket ring (G) from lamp holder (F).
6.Place shade onto lamp holder (F)
7.Tighten socket ring (G) onto lamp holder (F).
TUDE B
NOT INCLUDED
KD
KD
KD
TUDE C
Lamp Body A
Lamp Body E
Tighten Ring G
lamp holder F
CAUTION; IN ACCORDANCE WITH THE UL REGULATION,
THE SHADE SHOULD BE OPEN TOP&OPEN BOTTOM AND
“CD”IS BIGGER THAN OR EQUALS TO 4,”R” IS NOT
SMALLER THAN 3-1/2”OR MAY CAUSE FIRE “H”IS 3-1/4”
/