Ltech MT-1A-V1D1 Owner's manual

Brand
Ltech
Model
MT-1A-V1D1
Type
Owner's manual

Ltech MT-1A-V1D1 is a DALI Constant Voltage Driver, specially designed for magnetic & linear lamps. It features no input polarity, DC to DC constant current output, and DALI 2.0 protocol. Additionally, its ultra-small size makes it suitable for STUCCHI standard housings.

The MT-1A-V1D1 offers a smooth dimming range from 0-100% down to 0.1%, without any kicker or high-frequency sound during magnetic installation. It provides comprehensive protection against short circuits, overloads, and anti-reverse input, ensuring the safety and reliability of your lighting system.

Ltech MT-1A-V1D1 is a DALI Constant Voltage Driver, specially designed for magnetic & linear lamps. It features no input polarity, DC to DC constant current output, and DALI 2.0 protocol. Additionally, its ultra-small size makes it suitable for STUCCHI standard housings.

The MT-1A-V1D1 offers a smooth dimming range from 0-100% down to 0.1%, without any kicker or high-frequency sound during magnetic installation. It provides comprehensive protection against short circuits, overloads, and anti-reverse input, ensuring the safety and reliability of your lighting system.

1www.ltech.cn
MT-1A-V1D1
MT-1A-V1D1
DALI
DALI Constant Voltage Driver
Special for magnetic & linear lamp
- No input polarity.
- DC to DCconstant current output.
- DALI 2.0 protocol.
- Ultra-small size , suitable for STUCCHI standard housings.
- Magnetic installation is quiet without high-frequency sound.
- Smooth dimming curves without kicker.
- Short circuit, overload and anti-reverse protection.
Suitable for STUCCHI standard housings
- 9519-166-K
- B 9519-166-K/W
No noise, no kicker Installation guide
Technical Specs
12-48Vdc
≤1.1A
Input Current
Efficiency(Typ)
InputVoltage
Standby Power
Output Voltage
Output Power
Output Current
Channel 1
Working Temperature
Working Humidity
Storage Temperature
ta: -30~55°C
20~95%RH, non-condensing
-40~80°C, 10~95%RH
Dimensions
Weight(G.W.)
97×14×9mm (L×W×H)
6.6g±2g
Max.1A
Overload Protection
Short Circuit Protection
DimmingInterface DALI-2
MT-1A-V1D1
12W-48W
12-48Vdc±5%(Nopolarity)
Input Anti -reverse Protection
0-100%, downto0.1%
Dimming Range
The load current is out of range,the current drops until the power is turned on again.
Close output and automatically recover once the fault is removed.
No input polarity , able to output normally.
Carton Size
No-load Protection
Hot Plug
The product does not be damaged.
Support electric plug plug.
tc:87°C
≥90%
≤0.5W
MODEL
OUTPUT
INPUT
ENVIRONMENT
PROTECTION
OTHERS
370×290×190mm（L×W×H）,240pcs/ctn1.58kg±5%ctn
DIM
DALI
9
2www.ltech.cn
14
97
92
3.4 3.2 3.43.2
V1
V2
DA1
DA2
LED+LED-
Unit:mm
Dimensions
Signal terminal Lamp terminal Voltage terminal
Terminal description
PCB board
DALI Signal
(Not polarity)
LED lamps Connection
Input voltage
(Not polarity)
Side view
Main view
MT-1A-V1D1
DALI
3www.ltech.cn
L
DA1
DA2
N
…
48Vdc 48Vdc 48Vdc
220V/110Vac
Wiring Diagram
LED lamp
DALI master controller DALI BUS
power supply
LED lamp LED lamp
Warranty Agreement
Attentions
Products shall be installed by quali?ed professionals.
LTECH products are and not lightningproof non-waterproof (special models excepted). Please avoid the sun and rain. When installed outdoors,
please ensure they are mounted in a water proof enclosure or in an area equipped with lightning protection devic
Good heat dissipation will extend the working life of products. Please ensure good ventilation.
Please check if the working voltage used complies with the parameter requirements of products.
The diameter of wire used must be able to load the light fixtures you connect and ensure the firm wiring.
This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our
o cial distributors if you have any question.
Warranty exclusions below:
No any contract signed by LTECH.
Warranty labels and barcodes have been damaged.
Damage caused by natural disasters and force majeure.
Products with severe physical damage.
Beyond warranty periods.
Warranty periods from the date of delivery : 5 years.
Free repair or replacement services for quality problems are provided within warranty periods.
1. Repair or replacement provided is the only remedy for customers. LTECH is not liable for any incidental or consequential damage unless it
is within the law.
2. LTECH has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.
Before you power on products, please make sure all the wiring is correct in case of incorrect connection that causes damage to light fixtures.
If a fault occurs, please do not attempt to fix products by yourself. If you have any question, please contact your suppliers.
Any artificial damage caused by high voltage, overload, or improper operations.
MT-1A-V1D1
Power
4www.ltech.cn
DALI
Update Log
Version Update Content
Updated Time Updated by
A0 Original version.
2023.10.20 Yang Weiling
MT-1A-V1D1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Ltech MT-1A-V1D1 Owner's manual

Brand
Ltech
Model
MT-1A-V1D1
Type
Owner's manual

Ltech MT-1A-V1D1 is a DALI Constant Voltage Driver, specially designed for magnetic & linear lamps. It features no input polarity, DC to DC constant current output, and DALI 2.0 protocol. Additionally, its ultra-small size makes it suitable for STUCCHI standard housings.

The MT-1A-V1D1 offers a smooth dimming range from 0-100% down to 0.1%, without any kicker or high-frequency sound during magnetic installation. It provides comprehensive protection against short circuits, overloads, and anti-reverse input, ensuring the safety and reliability of your lighting system.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents