2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Chief
  6. PSB2409

Chief PSB2409 Installation guide

  • Hello! I've analyzed the provided installation instructions for the Chief PSB-2409 display mounting bracket. This document details the necessary components, weight limits, and step-by-step instructions for properly mounting your display. I'm ready to answer your questions about the installation process, the included hardware, and any other aspects of the bracket's use.
  • What is the maximum weight that the interface can support?
    What size screws are used to secure the mounting buttons?
    What size screws are used to attach the brackets to the display?
INSTALLATION INSTRUCTIONS
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
8804-002000 Rev00
©2009 Milestone AV Technologies,
a Duchossois Group Company
02/09
PSB-2409
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Interface Side Brackets (4) Mounting Buttons – Tapped
(4) 10-24 x .500 Button Head Cap Screws (4) .74 x .25 x .25 Nylon Spacers
(4) M6 x 20mm Phillips Head Screws (1) 1/8” Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
1. Chief Q-latch Button Installation
Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket, to center brackets (four places) (see
Figure 2 & Figure3).
CAUTION!
Figure 1
Figure 2 Figure 3
WARNING!
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED. THE MAXIMUM WEIGHT TO BE INSTALLED
ON THE INTERFACE IS 150 POUNDS (68.04 KG).
2. Bracket Installation: Place nylon spacers over mounting holes of screen and attach brackets to back of display
using the M6 screws (see Figure 4 & Figure 5). Do not over tighten screws.
3. Follow the Chief mount instruction manual for screen installation.
Figure 4 Figure 5
/