Becken FRIGORIFICO COMBI NF BC5369 Owner's manual

Service Manual_2020-V1.0

1

Service Manual

BMF SERIES

Applicable Models

Product Models

Applicable Models

HD-403RWEN

CE-BCD310WE-JT

22031020007085

The picture in this service manual is only for reference, and specific appearance

and configuration are subject to the real product.

This manual mainly teaches the method, the specific work skill needs engineer

to accumulate through the daily work.

Service Manual_2020-V1.0

2

WARNING

Important Safety Notice

There are special components used in this equipment which are important for safety. These parts are

marked by in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement

Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to

prevent shock, fire or other hazards. Do not modify the original design without permission of

manufacturer.

WARNING

Important Safety Notice

The Maintenance Manual is only for the use of maintenance personnel with certain experience and

background in electrical, electronic and mechanical field.

Any attempt to repair main devices may lead to personal injury and property loss.

Manufacturers or distributors are not responsible for the content of the Manual and interpretation thereof.

Midea Refrigerators

Technical Maintenance Manual

Copyright @2017

written approval by the Overseas Sales Corporation of Midea Refrigerators.

 
 
                                          Service Manual_2020-V1.0 

 Contents 
SIGNIFICANT UPDATE NOTES (NONE) ........................................................................................................ 5 
SAFETY WARNING ............................................................................................................................................... 6 
1 WARNING FOR OPERATION SAFETY ........................................................................................................................... 6 
2 SAFETY INSTRUCTION FOR REFRIGERANT ................................................................................................................. 8 
INSTALLATION AND COMMISSIONING ............................................................................................................ 9 
1 HANDLING................................................................................................................................................................... 9 
2 DOOR DISASSEMBLY AND ASSEMBLY ........................................................................................................................ 9 
3 INSTALLATION LOCATION ............................................................................................................................................ 9 
4 LEVELING OF THE REFRIGERATOR ........................................................................................................................... 10 
5 LEFT OR RIGHT OPEN DOOR REVERSAL ................................................................................................................... 10 
5 INSTALLATION OF HANDLE（NONE） ...................................................................................................................... 12 
MAIN PARTS AND EXTERNAL DIMENSION.................................................................................................... 13 
1 MAIN PARTS .............................................................................................................................................................. 13 
2 EXTERNAL DIMENSION ............................................................................................................................................. 14 
3 MIDEA PRODUCT SERIAL NUMBER AND LOCATION ................................................................................................... 14 
ELECTRIC CONTROL SYSTEM ......................................................................................................................... 16 
1 ELECTRICAL PARTS PARAMETERS ............................................................................................................................ 16 
2 CIRCUIT DIAGRAM .................................................................................................................................................... 18 
3 MAIN PCB TERMINAL CONNECTION DIAGRAM ......................................................................................................... 19 
REFRIGERATION SYSTEM ................................................................................................................................ 20 
1 REFRIGERATION SYSTEM WORKING PRINCIPLE ....................................................................................................... 20 
2 COOLING PIPELINE AND DRAIN PIPE INSIDE THE CABINET........................................................................................ 20 
3 CIRCULATING ROUTE OF COOLING AIR ..................................................................................................................... 21 
4 WELDING POINTS IN CHAMBERS OR FOAM LAYER .................................................................................................... 21 
5 WELDING POINT IN THE COMPRESSOR CASE ........................................................................................................... 22 
DISMANTLING OF PARTS .................................................................................................................................. 23 
1 PARTS ON THE DOOR ............................................................................................................................................... 23 
2 PARTS INSIDE THE REFRIGERATOR .......................................................................................................................... 23 
3 LIGHT SYSTEM .......................................................................................................................................................... 24 
4 AIR DUCT COMPONENTS REFRIGERATING CHAMBER AND FAN MOTOR .................................................................... 25 
5 AIR DUCT COMPONENTS IN FREEZING CHAMBER AND FAN MOTOR.......................................................................... 26 
6 EVAPORATOR AND DEFROST SYSTEM...................................................................................................................... 27 
7 COMPRESSOR CASE ................................................................................................................................................ 28 
8 DISPLAY CONTROL BOARD ....................................................................................................................................... 32 
9 MAIN CONTROL BOARD ............................................................................................................................................ 32 
TEMPERATURE SENSING SYSTEM ................................................................................................................. 34 

 
 
                                          Service Manual_2020-V1.0 

1 POSITION OF SENSORS ............................................................................................................................................ 34 
2 REPLACEMENT OF SENSORS ................................................................................................................................... 34 
3 SENSOR WITHOUT TERMINAL REPLACEMENT .......................................................................................................... 35 
4 SENSOR R/T TABLE .................................................................................................................................................. 36 
FUNCTION AND OPERATION ............................................................................................................................ 38 
1 DISPLAY OPERATION PANEL ..................................................................................................................................... 38 
2 TEMPERATURE CONTROL ......................................................................................................................................... 38 
3 MODE SETTING ......................................................................................................................................................... 39 
4 DEFROSTING FUNCTION ........................................................................................................................................... 39 
5 OPEN DOOR ALARM (NONE) ..................................................................................................................................... 39 
6 ERROR CODE AND SOLUTIONS ................................................................................................................................. 39 
7 TEST MODE ............................................................................................................................................................... 39 
8 DEMO MODE（NONE） ........................................................................................................................................... 40 
9 BACKUP DATA FOR POWER FAIL ............................................................................................................................... 40 
COMPRESSOR .................................................................................................................................................. 41 
1 COMPRESSOR ON AND OFF CONTROL SPECIFICATIONS ........................................................................................ 41 
TROUBLESHOOTING METHOD ...................................................................................................................... 42 
1 NO COOLING (AIR COOLING-ELECTRONIC) ............................................................................................................ 42 
2 NO WORKING OF COMPRESSOR ............................................................................................................................. 44 
3 INSIDE FROSTING, NO DEFROSTING ....................................................................................................................... 45 
4 INSIDE FROSTING, NO DEFROSTING-MAINTENANCE GUIDELINES .......................................................................... 46 
5 LIGHT IS NOT ON ..................................................................................................................................................... 47 
6 FAN FAILURE ........................................................................................................................................................... 48 
7 DEFECTIVE DEFROST CIRCUIT ............................................................................................................................... 48 
8 NOISE ..................................................................................................................................................................... 49 
9 AIR DUCT NOT OPERATED ...................................................................................................................................... 49 
PRODUCT EXPLODED VIEW AND SPARE PARTS LIST ............................................................................. 50 
 
   

Service Manual_2020-V1.0

5

1. Significant update notes (None)

Service Manual_2020-V1.0

6

2. Safety Warning

2.1 Warning for operation safety

Important Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous voltage

constituting a risk of electric shock is present

within your freezer.

This symbol indicates that there are important

operating and maintenance instructions in the

literature accompanying your freezer.

WARNING

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this appliance near water.

6) Clean only with a damp cloth.

7) Do not block any ventilation openings.

8) Install in accordance with the manufacturer’s instructions.

9) Do not install near any heat sources, such as radiators, heat registers, stoves, or

other apparatus that produce heat.

10) Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong are provided for your

safety. If the provided plug does not fit into your outlet, consult an electrician for replacement

of the obsolete outlet.

11) Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the appliance.

12) Do not attempt to modify or extend the power cord of this appliance.

13) Unplug this appliance during lightning storms or when it will not be used for long

periods of time.

14) Make sure that the available AC power matches the voltage requirements of this

appliance.

Service Manual_2020-V1.0

7

CONNECTING ELECTRICITY

Electrical Shock Hazard.

Plug into a grounded 3-prong outlet.

Do not remove the ground prong.

Do not use an adapter.

Failure to follow these instructions can

result in death, fire, or electrical shock.

WARNING

Electric Shock Hazard

Failure to follow these instructions can result in electric shock, fire, or

death.

1) WARNING–Keep ventilation openings, in both the freezer and the built-in structure,

clear of obstruction.

2) WARNING–Do not touch the interior of the freezer with wet hands. This could result

in frost bite.

3) WARNING–Do not use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the manufacturer.

4) WARNING–Do not damage the refrigerant circuit.

5) WARNING–Do not damage the refrigerant tubing when handling, moving, or using

the freezer.

6) WARNING–DANGER–Never allow children to play with, operate, or crawl inside the

freezer. Risk of child entrapment. Before you throw away your old freezer:

6-1) Take off the doors

6-2) Leave the shelves in place so that children may not easily climb inside

7) Unplug the freezer before carrying out user maintenance on it.

8) This freezer can be used by children age eight years and older and persons with

reduced physical or mental capabilities or lack of experience and knowledge if they are

given supervision or instruction concerning the use of the freezer in a safe way and

understand the hazards involved. Children should not play with the freezer. Cleaning and

maintenance should not be performed by children without supervision.

9) If a component part is damaged, it must be replaced by the manufacturer, its service

agent, or similar qualified persons in order to avoid a hazard.

10) Please dispose of the freezer according to local regulations as the freezer contains

flammable gas and refrigerant.

11) Follow local regulations regarding disposal of the freezer due to flammable

refrigerant and gas. All refrigeration products contain refrigerants, which under the

guidelines of federal law must be removed before disposal. It is the consumer's

responsibility to comply with federal and local regulations when disposing of this product.

12) This freezer is intended to be used in household and similar environments.

Service Manual_2020-V1.0

8

13) Do not store or use gasoline or any flammable liquids inside or in the vicinity of this

freezer.

14) Do not use extension cords or ungrounded (two-prong) adapters with this freezer. If

the power cord is too short, have a qualified electrician install an outlet near the freezer. Use

of an extension cord can negatively affect the freezer’s performance.

Grounding requirement

This freezer must be grounded. This freezer is equipped with a cord having a grounding

wire with a grounding plug. The plug must be inserted into an outlet that is properly installed

and grounded.

Improper use of the grounding plug can result in a risk of electric shock. Consult a

qualified electrician or service person if the grounding instructions are not completely

understood, or if doubt exists as to whether the freezer is properly grounded.

2.2 Safety instruction for refrigerant

Explosion Hazard.

Keep flammable materials and vapors, such as gasoline, away from freezer. Failure to do so

can result in fire, explosion, or death.

Safety instruction for refrigerant

DANGER–Risk of Fire or Explosion. Flammable Refrigerant Used. To Be Repaired Only By

Trained Service Personnel. Do Not Use Mechanical Devices. Do Not Puncture Refrigerant

Tubing. CAUTION–Risk of Fire or Explosion. Flammable Refrigerant Used. Consult Repair

Manual/Owner’s Guide Before Attempting To Service This Product. All Safety Precautions

Must be Followed. CAUTION–Risk of Fire or Explosion. Dispose of Properly In Accordance

With Federal Or Local Regulations. Flammable Refrigerant Used. CAUTION–Risk of Fire or

Explosion Due To Puncture Of Refrigerant Tubing; Follow Handling Instructions Carefully.

Flammable Refrigerant Used.

Service Manual_2020-V1.0

9

3. Installation and commissioning

3.1 Handling

Handling

1) Protect the refrigerator in moving it,Same as shown

as left photo, please move it by handcart with cushion

2) Remove all packing materials and bottom cushion,

the move into house for placement

3) After moving it to appropriate location, wait for 2 hou

rs before power on.

3.2 Door Disassembly and Assembly

When the whole refrigerator cannot enter the room, the door can be disassembled, then

assembled after entering separately.

3.3 Installation location

Installation location

Please select a ventilated place to place the refrigerator,

and reserve space according to the recommended size

in the picture, which is conducive to heat dissipation,

performance improvement and energy consumption

reduction.

Service Manual_2020-V1.0

10

3.4 Leveling of the refrigerator

Leveling of the refrigerator

If the refrigerator cannot be placed steadily, adjust the

footing to level it. Turn the feet clockwise to raise the

refrigerator; turn the feet counterclockwise to lower the

refrigerator.

3.5 Left or right open door reversal

Door reversal

1) Power off and remove all food from the fridge.

2)Dismantle the upper hinge cover, screws and upper hinge,

and remove the hole cover from the other side.

3）Unplug the wiring connector on the right side of

refrigerator top（①,③wiring connector）

4)Take off refrigerating door as well as screws, screws

cover, sticker and middle hinge, hole cap.

Service Manual_2020-V1.0

11

5) Take off freezing door, dismantle bottom hinge and

hole caps. Install shaft of bottom hinge on the other side,

then install the bottom hinge and hole caps on the other

side of cabinet.

6) Remove the upper cover of refrigerating chamber

door, install the upper hinge sleeve, door signal line to

the other side and install the door upper cover.Dismantle

the door self-locking, door stopper and sleeve pipe of

refrigerating chamber door. Take out left self-locking of

refrigerating chamber door from accessory bag,

assemble the sleeve pipe, left self-locking and door

stopper to the left side.

7) Remove the shaft sleeve and cap of the upper end

cover of the freezing door and install them at the left and

right swap positions. Remove the door self-locking, door

stop and shaft sleeve of the freezing door, take out the

left self-locking from the accessory bag, install it on the

left side of the lower end cover of the freezing door,

change the door stop and shaft sleeve to the left side of

the lower end cover of the freezing door.

Service Manual_2020-V1.0

12

8) Place freezing door on bottom hinge and mount middle

hinge, screws, screw cover, sticker and hole cap

9) Take out the left top hinge, left top hinge cover from

accessories package. Put refrigerating door on middle

hinge, install top hinge, connect signal line terminal ④

with signal line terminal①, connect signal line terminal

② with signal line terminal ③, install top hinge cover

and hole cover.

10）Door reverse installation is completed.

4.5 Installation of handle（None）

Service Manual_2020-V1.0

13

4. Main parts and external dimension

4.1 Main parts

(The picture is only for reference, and specific appearance and configuration are subject to the real

product)

(The picture is only for reference, and specific appearance and configuration are subject to the real

product)

1. Light box assembly

2.Air duct components in refrigerating chamber

3.R glass shelves

4.Cover plate of crisper

5.Crisper for fruit and vegetable

6.F upper drawer assembly

7.F bottom drawer assembly

8.R big bottle frame

9.R small bottle frame

10.R big bottle frame

1

2

3

4

5

6

7

8

9

10

Service Manual_2020-V1.0

14

4.2 External dimension

Description

Code

Size (mm)

Height to top of Cabinet

A

1880

Width

B

595

Depth w/Cabinet

C

545

Depth w/Door

D

630

Depth w/Handle

E

\

Depth (Door open 90 deg. w)

F

1230

Depth (Door open 135 deg. w)

G

1074

Width (Door open 135 deg. w)

H

988

(The picture is only for reference)

4.3 Midea product serial number and location

1） Product Serial Number — Including order number, production date and other information. When the

product occur problem, it needs to be recorded or photographed and provided to us.

Service Manual_2020-V1.0

15

2）Paste location

Some products also have S/N on the lower part of the right side of the Cabinet.

Service Manual_2020-V1.0

16

5. Electric control system

5.1 Electrical parts parameters

Applicable Model

HD-403RWEN

UR-BCD360WE-FT

Product Model

CE-BCD310WE-JT

Product code

22031020007085

Rated Voltage

230V、50Hz

Item

Specification

Refrigerant

R600a

Compressor

PZ75H1W

(Part code : 11101010014697)

Starting device type

Fixed Speed

The COP of compressor

1.9 (W/W)

The max cooling capacity of

compressor

137W

Winding resistance of compressor

wiring terminal (20℃)

Rmc：25.82±7%Ω

Rsc：20.62±7%Ω

Rms = Rmc + Rsc

Winding resistance picture

Starter(PTC)

QP2-15

(Part code:12031000001062)

Overload protector(OLP)

DRB16T61A1

(Part code:12031000001349)

Integrate PTC+OLP

None

Variable frequency driver board

None

Capacitor

3.0μF/450V

Power filter (EMI)

None

Power reactor (EU EMC)

None

Motor

Fan motor of the freezing chamber

DC12V/≤3.5W

Fan motor of the refrigerating

chamber

None

Electric damper

None

Lights

Lights inside the refrigerating

chamber

LED DC12V

Lights inside the freezing chamber

None

Others Lights

None

Service Manual_2020-V1.0

17

Switch of the light

■Mechanical switch

□Magnetism control switch

Defrosting parts

Defrosting sensor

NTC B3839 ( B5/25=3839K±2% )

Fuse in freezing chamber

77(0,-4) ℃

Defrost heater in freezing chamber

230V、170W

Service Manual_2020-V1.0

18

5.2 Circuit diagram

R: Refrigerator HW: Ambient temperature

Service Manual_2020-V1.0

19

5.3 Main PCB terminal connection diagram

Connecting terminals

1.Power supply

2. Compressor

3. Freezing defrost heater

4. Display control panel

5.Refrigeration light switch

6. Refrigeration sensor

7. Freezing defrost sensor

8. Ambient temperature sensor

9. LED of refrigeration chamber

10. Fan of freezing chamber

Service Manual_2020-V1.0

20

6. Refrigeration system

6.1 Refrigeration system working principle

❶Compressor→❷ Anti-condensation tube→❸ Condenser→❹ Dry filter→❺ Capillary tube→❻

Evaporator→❼ Suction tube→❶Compressor

6.2 Cooling pipeline and drain pipe inside the cabinet

Page is loading ...

Becken FRIGORIFICO COMBI NF BC5369 Owner's manual

Becken FRIGORIFICO COMBI NF BC5369 Owner's manual

Related papers

Other documents