MICROPOWER GROUP 24V-24V DC-DC Converter User manual
- Type
- User manual
MICROPOWER GROUP 24V-24V DC-DC Converter is a reliable and efficient solution for converting power in various applications. With an input voltage range of 18-32 VDC and a stable output voltage of 27.2 VDC, it delivers up to 60A or 40A of continuous output current, depending on the model. This converter stands out for its compact design, IP67-rated enclosure for outdoor use, and protection against overload and short circuits. Its wide range of applications includes indoor and outdoor installations, vehicles, boats, and integration into existing machinery.
MICROPOWER GROUP 24V-24V DC-DC Converter is a reliable and efficient solution for converting power in various applications. With an input voltage range of 18-32 VDC and a stable output voltage of 27.2 VDC, it delivers up to 60A or 40A of continuous output current, depending on the model. This converter stands out for its compact design, IP67-rated enclosure for outdoor use, and protection against overload and short circuits. Its wide range of applications includes indoor and outdoor installations, vehicles, boats, and integration into existing machinery.
DC/DC
CONVERTER
24V–24V / 40A & 60A
GALVANIC ISOLATED
1
DCDC CONVERTER 24/24
Idavägen 1 SE-352 46 | +46 470 72 74 00 | support@micropower.se
CRITICAL INFORMATION
The technical data, information and illustrations have been carefully compiled and corresponds to the product status
at the time of printing this manual. The manufacturer reserves the right to improve or modify the product,
specifications, and documentation at any time without prior notice, if it is not considered necessary for technical
reasons.
Descriptions have been prepared very carefully and in detail, yet it is never possible to completely rule out wrong.
Under no circumstances will the manufacturer be held responsible for errors or damages resulting from wrong use
or from misinterpretation.
The content of this documentation may not be copied, reproduced, translated, or otherwise passed on to third
parties in any form without the express written consent of Micropower.
Warning!
Failure to follow these safety instructions could result in personal injury, property damage or impair the
function of the product.
Danger! High voltage!
Failure to follow this safety instruction can result in injury or death or may damage or destroy the
product.
Important Information!
To avoid operator error, read this manual carefully before installing and using the product and follow
the appropriate instructions. Keep this manual near the product so that it can be referred to later.
This product is not intended for use by persons (including children) with reduced physical sensory or
mental capabilities, or lack of knowledge or experience, unless they have received instructions or
information on how to use the product by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the product.
2
DCDC CONVERTER 24/24
Idavägen 1 SE-352 46 | +46 470 72 74 00 | support@micropower.se
TABLE OF CONTENT
CRITICAL INFORMATION ................................................................................................................................................... 1
USER MANUAL .................................................................................................................................................................. 3
General .......................................................................................................................................................................... 3
Installation .................................................................................................................................................................... 3
TECHNICAL SPECIFICATION ............................................................................................................................................... 4
INCLUDED IN THE PACKAGE .............................................................................................................................................. 4
WARRANTY ........................................................................................................................................................................ 5
Warranty claim .............................................................................................................................................................. 5
CONTACT INFORMATION .................................................................................................................................................. 6
PRODUCT AND SUPPORT INFORMATION ......................................................................................................................... 6
APPROVALS ....................................................................................................................................................................... 6
DIMENSIONS ..................................................................................................................................................................... 7
3
DCDC CONVERTER 24/24
Idavägen 1 SE-352 46 | +46 470 72 74 00 | support@micropower.se
USER MANUAL
• Read this instruction before the DC/DC is taken into use.
• Keep this manual within easy reach for the user of this DC/DC converter.
General
This product from Micropower is a highly efficient, intelligent, and very compact DC/DC charger with the latest
switch mode technology in power conversion. Suitable for all DC applications where a secured and stable 27,2 VDC
voltage is needed. The internal electronics controls input and output current and is both overload and short circuit
protected. All electronics are potted with polyurethane which makes the unit completely waterproof and very shock
resistant.
The unit has no LED indications on the outside of the unit for black-out purpose as well as no ON/OFF function
button. An external LED can be connected for Power ON indication.
As the unit acts like a stable power supply, the voltage will always be stable at 27.2 V as long as the input voltage is
between 18–32 VDC and the unit will always be able to provide the specified current.
Installation
Check that the correct input voltage range and output voltage range matches the installation and the parameters
mentioned on the DC/DC. The DC/DC enclosure is IP67, the internal electronics has a protective layer of lacquer. This
brings the DC/DC suitable for indoor mounting, outdoor mounting in vehicles, in boats or built into the current
machine.
DC-in & out connection according to VG95234.
4
DCDC CONVERTER 24/24
Idavägen 1 SE-352 46 | +46 470 72 74 00 | support@micropower.se
TECHNICAL SPECIFICATION
MODELL
MIL DC/DC 24-24V 60A
MIL DC/DC 24-24V 40A
Article number
0060392
0060391
Input voltage
18–32 VDC
18–32 VDC
Output voltage
27.2 VDC
27.2 VDC
Output current
60 A
40 A
Ambient temperature
–46 to 55 °C
–46 to 55 °C
Efficiency
> 95 %
> 95 %
DC-in connection
Glenair CA3102E
Glenair CA3102E
DC-out connection
Glenair CA3102E
Glenair CA3102E
Encapsulation
IP67
IP67
Measurements (W x L x H)
160 x 144 x 101 mm
160 x 144 x 101 mm
Weight
2.5 Kg
2.3 Kg
INCLUDED IN THE PACKAGE
MICROPOWER DCDC MANUAL
MICROPOWER DCDC converter
5
DCDC CONVERTER 24/24
Idavägen 1 SE-352 46 | +46 470 72 74 00 | support@micropower.se
WARRANTY
• Micropower warranty applies only to original purchaser within a period of 24 months from the date from
delivery.
• Micropower guarantees that the product is in excellent condition upon delivery, unless comes full refund.
• If the user has not conducted a proper installation or used the product incorrectly applies no warranty.
Warranty claim
To take advantage of warranty please contact your retailer.
Please have following information available:
• Receipt
• Model number
• Product serial number
• A brief description of the malfunction
WARNING!
Do not use this product without reading the entire manual! Incorrectly installed or use of the product
can sincerely damage the user, destroy the product or connected equipment. If the product is used the
wrong way, warranty may be void.
6
DCDC CONVERTER 24/24
Idavägen 1 SE-352 46 | +46 470 72 74 00 | support@micropower.se
CONTACT INFORMATION
Micropower Group AB
Idavägen 1, SE-352 46 Växjö, Sweden
Phone: +46 (0)470-727400
e-mail: support@micropower.se
www.micropower-group.com
PRODUCT AND SUPPORT INFORMATION
For more information, visit Micropower Support Center:
APPROVALS
Manufactured by: Micropower Group AB
The manufacturer declares that this product complies with applicable requirements. Complete declaration is
available at Micropower Support Center: https://docs.micropower-group.com/Other docs
Doc: A04928 rev01
Print PN: 6540146
DIMENSIONS
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
MICROPOWER GROUP 24V-24V DC-DC Converter User manual
- Type
- User manual
MICROPOWER GROUP 24V-24V DC-DC Converter is a reliable and efficient solution for converting power in various applications. With an input voltage range of 18-32 VDC and a stable output voltage of 27.2 VDC, it delivers up to 60A or 40A of continuous output current, depending on the model. This converter stands out for its compact design, IP67-rated enclosure for outdoor use, and protection against overload and short circuits. Its wide range of applications includes indoor and outdoor installations, vehicles, boats, and integration into existing machinery.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Sharp 50 User manual
-
Primepower chAmp Series User manual
-
AMS AS1340 User guide
-
ZiLOG Z8F1682 User manual
-
Eagle Tree Systems Computer Monitor Computer Monitor User manual
-
Texas Instruments CD4046B Phase-Locked Loop (Rev. A) Application notes
-
-
Analog Devices Generic Signal Chains User guide
-
Seametrics FT415 Instructions Manual
-
Behringer Micropower PS400 User manual
