Panasonic EYFGA1AR User manual

Brand: Panasonic

Model: EYFGA1AR

Category: Power tools

Type: User manual

This manual is also suitable for

Unauthorized copying and distribution is a violation

of law.

Order Number PTD1408E43CE

Cordless Screwdriver

Model No. EYFGA1AR

Model No. EYFGA2AR

Model No. EYFGA3AR

Europe

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 8

5 Wiring Connection Diagram ---------------------------------17

6 Schematic Diagram ---------------------------------------------17

7 Appendix -----------------------------------------------------------18

8 Exploded View and Replacement Parts List -----------19

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3 Troubleshooting Guide

3.1. Main unit and charging adaptor

3.2. Trial Operation (after checking Troubleshooting Guide)

3.2.1. Assembly

• Confirm if there is no gap between housing A and B by pinching lead wires.

• There is no dust or deformation on battery terminals.

3.2.2. Operation

• Check whether the tool operates properly in both the forward and reveres directions.

• Check whether the tool speed increases continuously as the trigger is gradually engaged.

• Set the LED light to switch-linked mode (L2) and check whether the LED light turns on when the trigger is engaged and that it

turns off when the trigger is released.

• Set the buzzer to each of its three modes and verify that there is no buzzer in b0 mode, that the buzzer sounds when the green

lamp is on in b1 mode, and that the buzzer sounds when the red lamp is on b2 mode.

• Check whether the ID setting has been properly configured after repair and reassembly.

• Check whether the clutch handle rotation switches smoothly from positions 1 through 60 (whether it makes a click sound).

• Confirmation of the radio communication.

• Check whether the LED light turns on and off each time the LED light on/off button is depressed.

3.2.3. Integrity

• With the switch activated, shake the tool back and forth and up and down and verify that its sound

• Check for the presence of any dirt or foreign matter from the repair process on the outside of the tool.

• Confirm if there is no metallic sound and abnormal sound when shaking up-down and right-left.

• Check whether the keyless chuck is attached securely to the tool.

4 Disassembly and Assembly Instructions

*To assemble the tool, start with 4.10 and proceed to 4.1

4.1. How to remove the housing B

4.2. How to remove assemblies

4.3. Precautions when removing the module assembly

4.4. Tips for installing the module assembly

4.5. Checking and setting the module assembly’s DIP switches

4.6. Removing the motor from the driving assembly

4.7. Precautions when attaching and reattaching the stator from rotor

assembly

4.8. Precautions when attaching and reattaching the bit holder

4.9. Precautions when attaching and reattaching the gear box block

4.10. Precautions when attaching and reattaching the gear box block

4.11. Wiring and Assembly Points

5 Wiring Connection Diagram

6 Schematic Diagram

7 Appendix

8 Exploded View and Replacement Parts List

8.1. Exploded View Model No. EYFGA1AR

8.2. Replacement Parts Model No. EYFGA1AR

Safety Ref. No. Part No. Part Name & Description Quantity Remarks

1 WEYFGA1AK309 HOUSING AB SET 1

2 WEY7520L6077 TAPPING SCREW 2

3 WEZT611L9037 TAPPING SCREW 8 (K3*20), (8PCS/PK)

4 WEYFLA1AK327 F/R SELECTOR HANDLE 1

5 WEYFGA1NK337 OPERATION PLATE ASSEMBLY 1

6 WEYFGA1NW347 TIGHTENING CONFIRMATION LAMP COVER 1

7 WEYFLA1AL337 DISCERNMENT PLATE 1 (Blue)

8 WEY6225L0176 CLICK SPRING 1

9 WEYFGA1AL407 GEAR BOX ASSEMBLY 1

10 WEYFGA1NL188 ROTOR ASSEMBLY 1

11 WEYFGA1NL138 STATOR 1

12 WEYFGA1NL207 RIBBON CABLE 1

13 WEYFGA1NK207 SWITCH 1

14 WEY7540L2157 BATTERY TERMINAL BLOCK 1

15 WEYFLA1AL297 HARNESS 1

16 WEYFGA1NR218 MODULE ASSEMBLY 1

17 WEYFLA4AR278 TRANSMITTER 1

18 WEYFGA1NL288 SENSOR LED CIRCUIT ASSEMBLY 1

19 WEYFGA1NL267 BUZZER BOARD 1

- WEYFMA3NK819 OPERATING INSTRUCTIONS 1

- WEWGW2 FLOIL GREASE 1

- WEYFGA1NX877 GREASE 1

- WEY6470X5517 GREASE 1

- WEY004X8967 CALFOREX 1

- WEY6705X5527 SUNLIGHT GREASE 1

Page is loading ...

Panasonic EYFGA1AR User manual

Brand: Panasonic

Model: EYFGA1AR

Category: Power tools

Type: User manual

This manual is also suitable for

Download PDF

report

Panasonic EYFGA1AR User manual

This manual is also suitable for

Panasonic EYFGA1AR User manual

Related papers

Other documents