Dell Inspiron 5543 User manual

Inspiron 15

5000 Series

Service Manual

Computer Model: Inspiron 5543

Regulatory Model: P39F

Regulatory Type: P39F001

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better

use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss

of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal

injury, or death.

international copyright and intellectual property laws. Dell

™

and the Dell logo are trademarks

of Dell Inc. in the United States and/or other jurisdictions. All other marks and names

mentioned herein may be trademarks of their respective companies.

2014 - 12

Rev. A00

Contents

Before Working Inside Your Computer...................................9

Before You Begin .............................................................................................. 9

Safety Instructions............................................................................................. 9

Recommended Tools...................................................................................... 10

After Working Inside Your Computer.................................... 12

Removing the Base Cover........................................................ 13

Procedure.........................................................................................................13

Replacing the Base Cover........................................................ 15

Procedure.........................................................................................................15

Removing the Battery............................................................... 16

Prerequisites.....................................................................................................16

Procedure.........................................................................................................16

Replacing the Battery................................................................17

Procedure......................................................................................................... 17

Post-requisites..................................................................................................17

Removing the Hard Drive.........................................................18

Prerequisites.....................................................................................................18

Procedure.........................................................................................................18

Replacing the Hard Drive......................................................... 21

Procedure.........................................................................................................21

Post-requisites................................................................................................. 21

Removing the Memory Modules............................................ 22

Prerequisites.....................................................................................................22

Procedure.........................................................................................................23

Replacing the Memory Modules.............................................24

Procedure........................................................................................................ 24

Post-requisites.................................................................................................24

Removing the Wireless Card................................................... 25

Prerequisites.....................................................................................................25

Procedure.........................................................................................................25

Replacing the Wireless Card....................................................27

Procedure.........................................................................................................27

Post-requisites................................................................................................. 27

Removing the Fan..................................................................... 28

Prerequisites.................................................................................................... 28

Procedure........................................................................................................ 28

Replacing the Fan...................................................................... 31

Procedure.........................................................................................................31

Post-requisites................................................................................................. 31

Removing the Keyboard...........................................................32

Prerequisites.....................................................................................................32

Procedure.........................................................................................................32

Replacing the Keyboard...........................................................35

Procedure.........................................................................................................35

Folding the Keyboard Cables.......................................................................... 35

Post-requisites................................................................................................. 37

Removing the Base Frame....................................................... 39

Prerequisites.....................................................................................................39

Procedure........................................................................................................ 39

Replacing the Base Frame....................................................... 43

Procedure........................................................................................................ 43

Post-requisites.................................................................................................43

Removing the Coin-Cell Battery............................................ 44

Prerequisites.................................................................................................... 44

Procedure........................................................................................................ 45

Replacing the Coin-Cell Battery............................................ 46

Procedure........................................................................................................ 46

Post-requisites.................................................................................................46

Removing the Heat Sink...........................................................47

Prerequisites.....................................................................................................47

Procedure........................................................................................................ 48

Replacing the Heat Sink...........................................................49

Procedure........................................................................................................ 49

Post-requisites.................................................................................................49

Removing the I/O Board.......................................................... 50

Prerequisites.................................................................................................... 50

Procedure........................................................................................................ 50

Replacing the I/O Board...........................................................52

Procedure.........................................................................................................52

Post-requisites................................................................................................. 52

Removing the Speakers............................................................53

Prerequisites.....................................................................................................53

Procedure.........................................................................................................53

Replacing the Speakers............................................................ 55

Procedure.........................................................................................................55

Post-requisites................................................................................................. 55

Removing the Status-Light Board..........................................56

Prerequisites.....................................................................................................56

Procedure........................................................................................................ 56

Replacing the Status-Light Board.......................................... 58

Procedure........................................................................................................ 58

Post-requisites.................................................................................................58

Removing the Power-Adapter Port....................................... 59

Prerequisites.....................................................................................................59

Procedure........................................................................................................ 59

Replacing the Power-Adapter Port........................................61

Procedure.........................................................................................................61

Post-requisites................................................................................................. 61

Removing the System Board................................................... 62

Prerequisites.....................................................................................................62

Procedure........................................................................................................ 62

Replacing the System Board................................................... 65

Procedure........................................................................................................ 65

Post-requisites.................................................................................................66

Removing the Display Assembly.............................................67

Prerequisites.....................................................................................................67

Procedure.........................................................................................................67

Replacing the Display Assembly.............................................70

Procedure........................................................................................................ 70

Post-requisites..................................................................................................71

Removing the Palm Rest.......................................................... 72

Prerequisites.....................................................................................................72

Procedure.........................................................................................................73

Replacing the Palm Rest...........................................................75

Procedure.........................................................................................................75

Post-requisites................................................................................................. 75

Removing the Display Bezel....................................................76

Prerequisites.....................................................................................................76

Procedure.........................................................................................................77

Replacing the Display Bezel.................................................... 78

Procedure.........................................................................................................78

Post-requisites................................................................................................. 78

Removing the Display Panel....................................................79

Prerequisites.....................................................................................................79

Procedure.........................................................................................................79

Replacing the Display Panel.................................................... 81

Procedure.........................................................................................................81

Post-requisites................................................................................................. 81

Removing the Display Brackets..............................................82

Prerequisites.................................................................................................... 82

Procedure........................................................................................................ 83

Replacing the Display Brackets.............................................. 84

Procedure........................................................................................................ 84

Post-requisites.................................................................................................84

Removing the Camera..............................................................85

Prerequisites.....................................................................................................85

Procedure........................................................................................................ 85

Replacing the Camera.............................................................. 87

Procedure.........................................................................................................87

Post-requisites................................................................................................. 87

Removing the Display Back-Cover and Antenna

Assembly..................................................................................... 88

Prerequisites.................................................................................................... 88

Procedure........................................................................................................ 88

Replacing the Display Back-Cover and Antenna

Assembly.....................................................................................90

Procedure........................................................................................................ 90

Post-requisites.................................................................................................90

Flashing the BIOS.......................................................................91

Getting Help and Contacting Dell..........................................92

Self-Help Resources........................................................................................92

Contacting Dell................................................................................................92

Before Working Inside Your

Computer

CAUTION: To avoid damaging the components and cards, handle

them by their edges and avoid touching pins and contacts.

NOTE: The images in this document may differ from your computer

depending on the configuration you ordered.

Before You Begin

1 Save and close all open files and exit all open applications.

2 Shut down your computer.

– Windows 8.1: On the Start screen, click or tap the power icon →

Shut down.

– Windows 7: Click or tap Start → Shut down .

NOTE: If you are using a different operating system, see the

documentation of your operating system for shut-down

instructions.

3 Disconnect your computer and all attached devices from their electrical

outlets.

4 Disconnect all cables such as telephone cables, network cables and so

on, from your computer.

5 Disconnect all attached devices and peripherals, such as keyboard,

mouse, monitor, and so on, from your computer.

6 Remove any media card and optical disc from your computer, if

applicable.

Safety Instructions

Use the following safety guidelines to protect your computer from potential

damage and ensure your personal safety.

9

WARNING: Before working inside your computer, read the safety

information that shipped with your computer. For more safety best

practices, see the Regulatory Compliance home page at dell.com/

regulatory_compliance.

WARNING: Disconnect all power sources before opening the

computer cover or panels. After you finish working inside the

computer, replace all covers, panels, and screws before connecting to

the power source.

CAUTION: To avoid damaging the computer, make sure that the work

surface is flat and clean.

CAUTION: To avoid damaging the components and cards, handle

them by their edges and avoid touching pins and contacts.

CAUTION: You should only perform troubleshooting and repairs as

authorized or directed by the Dell technical assistance team. Damage

due to servicing that is not authorized by Dell is not covered by your

warranty. See the safety instructions that shipped with the product or

at dell.com/regulatory_compliance.

CAUTION: Before touching anything inside your computer, ground

yourself by touching an unpainted metal surface, such as the metal at

the back of the computer. While you work, periodically touch an

unpainted metal surface to dissipate static electricity, which could

harm internal components.

CAUTION: When you disconnect a cable, pull on its connector or on

its pull-tab, not on the cable itself. Some cables have connectors with

locking tabs or thumb-screws that you must disengage before

disconnecting the cable. When disconnecting cables, keep them

evenly aligned to avoid bending any connector pins. When connecting

cables, make sure that the ports and connectors are correctly oriented

and aligned.

CAUTION: To disconnect a network cable, first unplug the cable from

your computer and then unplug the cable from the network device.

CAUTION: Press and eject any installed card from the media-card

reader.

Recommended Tools

The procedures in this document may require the following tools:

10

• Philips screwdriver

• Plastic scribe

11

After Working Inside Your

Computer

CAUTION: Leaving stray or loose screws inside your computer may

severely damage your computer.

1 Replace all screws and make sure that no stray screws remain inside your

computer.

2 Connect any external devices, peripherals, and cables you removed

before working on your computer.

3 Replace any media cards, discs, and any other part(s) that you removed

before working on your computer.

4 Connect your computer and all attached devices to their electrical

outlets.

5 Turn on your computer.

12

Removing the Base Cover

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Close the display and turn the computer over.

2 Remove the screws that secure the base cover to the base frame.

1 screws (2) 2 base cover

3 base frame

13

3 Using a plastic scribe, pry the base cover off the base frame.

1 plastic scribe 2 notch

3 base cover

14

Replacing the Base Cover

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Slide the tabs on the base cover into the base frame and snap the base

cover into place.

2 Replace the screws that secure the base cover to the base frame.

15

Removing the Battery

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Prerequisites

Remove the base cover.

Procedure

1 Remove the screws that secure the battery to the base frame.

2 Using the pull tab, slide and lift the battery off the base frame.

1 pull tab 2 screws (4)

3 battery

3 Turn the computer over, open the display, and press the power button

for about 5 seconds to ground the system board.

16

Replacing the Battery

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the screw holes the battery with the screw holes on the base frame

and press-down the battery to connect it to the battery connector.

2 Replace the screws that secure the battery to the base frame.

Post-requisites

Replace the base cover.

17

Removing the Hard Drive

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

CAUTION: Hard drives are fragile. Exercise care when handling the

hard drive.

CAUTION: To avoid data loss, do not remove the hard drive while the

computer is in sleep or on state.

Prerequisites

1 Remove the base cover.

2 Remove the battery.

Procedure

1 Remove the screws that secure the hard-drive assembly to the base

frame.

18

2 Using the pull tab, slide the hard-drive assembly out of the base frame.

1 pull tab 2 screws (4)

3 hard-drive assembly

3 Disconnect the hard-drive cable from the hard drive.

1 hard-drive assembly 2 hard-drive cable

4 Remove the screws that secure the hard-drive bracket to the hard drive.

19

5 Lift the hard drive off the hard-drive bracket .

1 screws (4) 2 hard-drive bracket

20

Page is loading ...

Dell Inspiron 5543 User manual

Related papers

Other documents