1/6
ASSEMBLY INSTRUCTIONS
This design and instruction booklet is subject to copyright.
RECTANGLE KIDS TABLE
2/6
Officeworks Superstores Pty Ltd. | 236-262 East Boundary Road | East Bentleigh | 3165 | AUSTRALIA
Important
Estimated Assemble Time: 15min
NOTE
· Please check you have all hardware before assembling.
· Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
· Do not tighten screws before all screws are in the right place.
· Do not use this product unless all bolts, screws and knobs are firmly secured.
· Check that all bolts, screws and knobs are securely tightened at least every 4
months.
WARNING
· If parts are missing, broken, damaged or worn stop using the product until all
repairs are made using manufacturer authorised parts.
· Failure to follow these warnings could result in serious injury.
DANGER
· CHILDREN MUST BE SUPERVISED.
Tools Required
CAUTION: Do not use tools other than those
required, as this can damage your new item.
3/6
1
1PC
2
4PCS
3
4PCS
Parts List
1
2
2
2
2
3
3
3
3
4/6
Included Hardware
M8x15mm
A B
C
D E
4PCS
4P CS
PC
1PC
M8
Please check you have all hardware components before assembling.
If you are missing any hardware components from the Hardware List please contact
My Zone on Tel: (03) 9310 3011 or Email:
Please ensure you have the name of the item, store purchased from, hardware part
required and quantity.
Please retain your receipt to validate warranty. Enjoy your new purchase!
M5x20mm
24PCS
1PC
Cap
1
2
2
2
2
3
3
3
3
24PCS
5/6
E
1PC
D
A
Step 1
Step 2
225mm
C
4PCS
B
4PCS
1PC
A
A
A
B
C
D
E
A
* Table Height Available:
375mm 400mm 425mm
450mm 475mm 500mm
525mm 550mm 575mm
600mm
* Note: Part D is to assist with
making legs level on uneven
surface.
20kg
Maximum Load Capacity:
Your RECTANGLE KIDS TABLE is now complete and ready for use!
6/6
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
/
