HK Audio E 210 Sub AS User manual

E 210 Sub AS
HK Audio
Brand
HK Audio
Model
E 210 Sub AS
Type
User manual

HK Audio E 210 Sub AS is an exceptional subwoofer designed for professional audio applications. It boasts a powerful 10" woofer and a Class-D amplifier, providing clear and precise bass reproduction. With its compact and lightweight design, the E 210 Sub AS is easy to transport and set up. It features a variety of input and output options, making it compatible with various audio systems. Whether for live performances, DJ sets, or studio recordings, the E 210 Sub AS delivers exceptional low-frequency reinforcement, enhancing your audio experience.

HK Audio E 210 Sub AS is an exceptional subwoofer designed for professional audio applications. It boasts a powerful 10" woofer and a Class-D amplifier, providing clear and precise bass reproduction. With its compact and lightweight design, the E 210 Sub AS is easy to transport and set up. It features a variety of input and output options, making it compatible with various audio systems. Whether for live performances, DJ sets, or studio recordings, the E 210 Sub AS delivers exceptional low-frequency reinforcement, enhancing your audio experience.

HK Audio
®
• Postfach 1509 • 66595 St. Wendel • Germany • info@hkaudio.com • www.hkaudio.com
International Inquiries: fax +49-68 51-905 215 • international@hkaudio.com
D-2655
Order No. 1007387
Subject to change without notice • Technische Änderungen vorbehalten
Copyright 2014 Music & Sales GmbH • 03/2014
Locking Wedge
Retrofit
for One E 210 Sub AS*
Umrüstsatz für E 210 Sub AS**
*To attach ELEMENTS mid/high units fitted
with a locking wedge connector
**Für die Verwendung von ELEMENTS Mid/High Units,
die mit der Locking Wedge-Verbindung ausgestattet sind
1
>ENGLISH
Please make a quick
inventory of the
conversion kit to
ensure it is complete. It
should come with two
wedge plates, eight
spacers, four splice
terminal type 2-pole
connectors – or clamps
for short – and four
Phillips screws (PZ2).
>DEUTSCH
Bitte überprüfen
Sie das Umrüstkit
auf Vollständigkeit.
Es sollten zwei
Keil platten, acht
Distanzscheiben, vier
Verbindungsklemmen
(2-polig) und vier
Kreuzschlitzschrauben
(PZ2) vorhanden sein.
2
Loosen and remove the
four Allen screws from
the E-Connect coupler.
Lösen Sie zunächst die
vier Inbusschrauben
der E-Connect
Flanschhalterung.
3
Remove the E-Connect
coupler with the
connected wire from
the enclosure.
Heben Sie die
E-Connect
Flanschhalterung mit
dem Kabel aus dem
Bass heraus.
4
Cut the wire to detach
the E-Connect coupler.
Durchtrennen Sie
die Kabel, um
die E-Connect
Flanschhalterung
vollständig zu
entnehmen.
5
Strip the ends of the
cables to expose the
wires and then attach
one clamp to the black
wire and another to the
red wire.
Legen Sie die Adern
der Kabel frei, um
jeweils eine Klemme
für die schwarze und
eine für die rote Ader
anzubringen.
6
Place the four spacers
on the screw holes in
the recessed section of
the panel and run the
wires with the clamps
through the cutout for
the E-Connect coupler.
Platzieren Sie die vier
Distanzscheiben auf
den Schraubenlöchern
im Ausschnitt und
führen Sie das
Signalkabel mit den
Klemmen durch
die Aussparung
für die E-Connect
Flanschhalterung.
7
Strip the ends of
the cables at the
E-Connect coupler
and connect them to
the corresponding
terminals on the
clamps.
Legen Sie nun die
Adern der Kabel
an der E-Connect
Flanschhalterung
frei und verbinden
Sie diese mit den
entsprechenden freien
Lüsterklemmen.
8
Insert the E-Connect
coupler into the wedge
plate and align the
wedge plate so the
wedge can be inserted
from the front.
Führen Sie den
E-Connect-Flansch
in die Keilplatte ein
und richten Sie die
Keilplatte so aus, dass
der Keil von vorne
eingeschoben werden
kann.
9
Bolt down the wedge
plate using the four
Allen screws.
Verschrauben Sie jetzt
die Keilplatte mit den
vier Inbus schrauben.
10
Insert and tighten the
two Phillips screws
to attach the wedge
plate to the enclosure‘s
wood panel.
Arretieren Sie
zuletzt die Keilplatte
mit den beiden
Kreuzschlitzschrauben
im Holzgehäuse des
Basses.
  • Page 1 1
  • Page 2 2

HK Audio E 210 Sub AS User manual

E 210 Sub AS
HK Audio
Brand
HK Audio
Model
E 210 Sub AS
Type
User manual

HK Audio E 210 Sub AS is an exceptional subwoofer designed for professional audio applications. It boasts a powerful 10" woofer and a Class-D amplifier, providing clear and precise bass reproduction. With its compact and lightweight design, the E 210 Sub AS is easy to transport and set up. It features a variety of input and output options, making it compatible with various audio systems. Whether for live performances, DJ sets, or studio recordings, the E 210 Sub AS delivers exceptional low-frequency reinforcement, enhancing your audio experience.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents