Pfaff 160S Owner's manual

Brand: Pfaff

Model: 160S

Category: Sewing machines

Type: Owner's manual

This manual is also suitable for

140S

Owner's

Manual

SMARTER BY PFAFF™ – inspired and developed by the premier PFAFF® sewing machine brand

160s

140s

This household sewing machine is designed to comply with IEC/

EN 60335-2-28 and UL1594.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should

always be followed, including the following:

Read all instructions before using this household sewing machine.

Keep the instructions at a suitable place close to the machine. Make

sure to hand them over if the machine is given to a third party.

DANGER – TO REDUCE THE RISK OF ELECTRIC

SHOCK:

$VHZLQJPDFKLQHVKRXOGQHYHUEHOHIWXQDWWHQGHGZKHQSOXJJHG

LQ$OZD\VXQSOXJWKLVVHZLQJPDFKLQHIURPWKHHOHFWULFRXWOHW

immediately after using and before cleaning, removing covers,

relamping, lubricating or when making any other user servicing

adjustments mentioned in the instruction manual.

WARNING – TO REDUCE THE RISK OF BURNS,

FIRE, ELECTRIC SHOCK, OR INJURY TO PERSON:

7KLVVHZLQJPDFKLQHLVQRWLQWHQGHGIRUXVHE\SHUVRQVLQFOXGLQJ

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the sewing machine

by a person responsible for their safety.

&KLOGUHQVKRXOGEHVXSHUYLVHGWRHQVXUHWKDWWKH\GRQRWSOD\

with the sewing machine.

8VHWKLVVHZLQJPDFKLQHRQO\IRULWVLQWHQGHGXVHDVGHVFULEHG

in this manual. Use only attachments recommended by the

manufacturer as contained in this manual.

1HYHURSHUDWHWKLVVHZLQJPDFKLQHLILWKDVDGDPDJHGFRUG

or plug, if it is not working properly, if it has been dropped or

damaged, or dropped into water. Return the sewing machine to

the nearest authorized dealer or service center for examination,

repair, electrical or mechanical adjustment.

1HYHURSHUDWHWKHVHZLQJPDFKLQHZLWKDQ\DLURSHQLQJVEORFNHG

Keep ventilation openings of the sewing machine and foot control

free from the accumulation of lint, dust, and loose cloth.

.HHSÀQJHUVDZD\IURPDOOPRYLQJSDUWV6SHFLDOFDUHLVUHTXLUHG

around the sewing machine needle.

$OZD\VXVHWKHSURSHUQHHGOHSODWH7KHZURQJSODWHFDQFDXVHWKH

needle to break.

'RQRWXVHEHQWQHHGOHV

'RQRWSXOORUSXVKIDEULFZKLOHVWLWFKLQJ,WPD\GHÁHFWWKHQHHGOH

causing it to break.

:HDUVDIHW\JODVVHV

6ZLWFKWKHVHZLQJPDFKLQHRII´µZKHQPDNLQJDQ\DGMXVWPHQW

in the needle area, such as threading needle, changing needle,

threading bobbin, or changing presser foot, etc.

1HYHUGURSRULQVHUWDQ\REMHFWLQWRDQ\RSHQLQJ

'RQRWXVHRXWGRRUV

'RQRWRSHUDWHZKHUHDHURVROVSUD\SURGXFWVDUHEHLQJXVHGRU

where oxygen is being administrated.

7RGLVFRQQHFWWXUQDOOFRQWUROVWRWKHRII´µSRVLWLRQWKHQ

remove plug from outlet.

'RQRWXQSOXJE\SXOOLQJRQFRUG7RXQSOXJJUDVSWKHSOXJQRW

the cord.

7KHQRLVHOHYHOXQGHUQRUPDORSHUDWLQJFRQGLWLRQVLVOHVVWKDQ

G%$

7KHIRRWFRQWUROLVXVHGWRRSHUDWHWKHPDFKLQH$YRLGSODFLQJRWKHU

objects on the foot control.

7KLVVHZLQJPDFKLQHLVSURYLGHGZLWKGRXEOHLQVXODWLRQ8VH

RQO\LGHQWLFDOUHSODFHPHQWSDUWV6HHLQVWUXFWLRQVIRU6HUYLFLQJRI

'RXEOH,QVXODWHG$SSOLDQFHV

SAVE THESE INSTRUCTIONS

SERVICING OF DOUBLE

INSULATED PRODUCTS

In a double-insulated product, two systems of insulation are

provided instead of grounding. No ground means is provided on

a double-insulated product, nor should a means for grounding

EHDGGHGWRWKHSURGXFW6HUYLFLQJRIDGRXEOHLQVXODWHGSURGXFW

UHTXLUHVH[WUHPHFDUHDQGNQRZOHGJHRIWKHV\VWHPDQGVKRXOGEH

GRQHRQO\E\TXDOLÀHGVHUYLFHSHUVRQQHO5HSODFHPHQWSDUWVIRU

a double-insulated product must be identical to those parts in the

SURGXFW$GRXEOHLQVXODWHGSURGXFWLVPDUNHGZLWKWKHZRUGV

¶'28%/(,168/$7,21·RU¶'28%/(,168/$7('·

INTRODUCTION .................................6

Machine Overview ............................................6

)URQW6LGH ...................................................... 6

Top Parts .......................................................7

5HDU6LGH .......................................................7

Accessories ..........................................................7

,QFOXGHG$FFHVVRULHVQRWLQ3LFWXUH .......... 7

Presser Feet ...................................................8

6WLWFK2YHUYLHZ²V ................................ 9

6WLWFK2YHUYLHZ²V .............................. 10

PREPARATIONS ...............................11

Unpacking ..................................................11

&RQQHFWWRWKH3RZHU6XSSO\ ..................11

3DFNDZD\DIWHU6HZLQJ ............................ 11

)UHH$UP .....................................................12

Leveling the Machine Base Plate .............12

Thread Cutter .............................................12

6SRRO3LQV ...................................................13

Threading the Machine .............................14

Needle Threader ........................................15

Threading for Twin Needle......................16

Bobbin Winding .........................................17

Inserting the Bobbin ..................................17

Presser Foot Pressure ................................18

Thread Tension ..........................................18

Needles ........................................................19

Changing the Needle ................................19

/RZHULQJ)HHG'RJV .................................20

Presser Foot Lift .........................................20

Changing the Presser Foot .......................20

6WLWFK6HOHFWLRQ ...........................................21

6WLWFK/HQJWK...............................................21

6WLWFK:LGWK ................................................ 22

$GMXVWDEOH1HHGOH3RVLWLRQ ......................22

5HYHUVH6HZLQJ ..........................................22

SEWING ..............................................23

6WDUWWR6HZ²6WUDLJKW6WLWFK .................... 23

&KDQJH6HZLQJ'LUHFWLRQ ......................... 23

)LQLVK6HZLQJ .............................................23

5HLQIRUFHG6WUDLJKW6WLWFK .........................24

7KUHH6WHS=LJ]DJ6WLWFK...........................24

2YHUORFN6WLWFK ........................................... 25

&ORVHG2YHUORFN6WLWFK ..............................25

Blindhem .....................................................26

6HZLQJRQ3DWFKHVRU$SSOLTXpV .............27

'DUQLQJZLWKWKH

7KUHH6WHS=LJ]DJ6WLWFK..........................27

Repairing Tears ..........................................27

6HZLQJRQ%XWWRQV ..................................... 28

6WDQGDUG%XWWRQKROHPRGHOV ..........29

6WDQGDUG%XWWRQKROHPRGHOV ..........30

&RUGHG%XWWRQKROH6WUHWFK)DEULFV ......31

6HZLQJ=LSSHUV ..........................................32

MAINTENANCE ................................33

Cleaning the Machine ...............................33

&OHDQLQJWKH%REELQ$UHD ........................33

&OHDQLQJ8QGHUWKH%REELQ$UHD ............ 33

5HSODFLQJWKH6WLWFK3ODWH .........................33

TROUBLESHOOTING .....................34

TABLE OF CONTENTS

INTRODUCTION

Front Side

1. Threading slots

2. Thread cutter

 /('OLJKW

4. Reverse lever

5. Free arm

 $FFHVVRU\WUD\

 6WLWFKOHQJWKGLDO

8. Handwheel

 6WLWFKVHOHFWLRQGLDO

10. Built-in needle threader

%XWWRQKROHOHYHURQO\V

12. Needle bar

6WLWFKSODWH

14. Bobbin cover

15. Lower thread guide

16. Needle screw

17. Presser foot lift

18. Needle thread guide

19. Presser foot bar and presser foot holder

20. Presser foot

Machine Overview

Top Parts

21. Presser foot pressure dial

22. Thread guides

6SRROFDSV6SRROSLQ

24. Hole for auxiliary

spool pin

25. Bobbin winder spindle

26. Take-up lever

27. Thread tension discs

28. Bobbin winder

tension disc

29. Thread tension dial

6WLWFKZLGWKGLDO

Rear Side

31. Main switch, connectors for power

cord and foot control

32. Handle

6OLGHIRUORZHULQJWKHIHHGGRJV

Accessories

%REELQV

35. Felt pad

6FUHZGULYHU

6SRROFDSODUJH

6SRROFDSVPDOO

6HDPULSSHUEUXVKDVRQH

40. Edge guide

$X[LOLDU\VSRROSLQ

Included Accessories

not in Picture

 )RRWFRQWURODQGSRZHUFRUG

 1HHGOHV

 +DUGFRYHU

27 28 2926 30

21 22

23 24 25

Standard Presser Foot 0

This foot is used mainly for straight stitching and zigzag stitching

with a stitch length longer than 1.0 mm.

Clearview Foot 1

When sewing decorative stitches or short zigzag stitches and

other utility stitches with less than 1.0mm stitch length, use this

IRRW7KHJURRYHRQWKHXQGHUVLGHRIWKHIRRWLVGHVLJQHGWRÁRZ

smoothly over the stitches.

Four-Step Buttonhole Foot 5A (for 140s)

6OLGLQJSODWHXQGHUIRRWKDVFRQYHQLHQWO\VSDFHGPDUNLQJVWRVWDUW

and stop your buttonhole at precisely the correct point.

Blindhem Foot 3

This foot is used for blindhem stitches. The toe on the foot guides

the fabric. The red guide on the foot is designed to ride along the

fold of the hem edge.

Note: Always use at least 5mm stitch width when using Blind Hem Foot

3. If using a stitch width other than the recommended, swing the needle

by turning the hand wheel to make sure the needle doesn’t hit the metal

pin in the foot.

One-Step Buttonhole Foot 5B (for 160s)

This foot has a space in the back for a button used to set the size of

WKHEXWWRQKROH7KHPDFKLQHZLOOVHZDEXWWRQKROHWRÀWWKDWEXW-

ton size.

Zipper Foot 4

This foot can be snapped on either the right or the left of the nee-

dle, making it easy to sew close to both sides of the zipper teeth.

Move the needle position to the right or left to sew closer to zipper

teeth.

Presser Feet

Stitch Name Description

5B 1-step Buttonhole 6WDQGDUGEXWWRQKROH

06WUDLJKWVWLWFK For all straight stitching and topstitching

0=LJ]DJVWLWFK )RUVHUJLQJDQGDSSOLTXp

0 Triple zigzag stitch For stitching on elastic band, darning tears and

patches

3 Blindhem stitch For invisible hem attachment

3 Elastic blindhem

stitch * For invisible hem attachment and simultaneous

serging, also for stretch fabrics

1'HFRUVWLWFK For all fabrics and types of work

1 Checker satin stitch 6DWLQGHFRUDWLYHVWLWFK

12SHQVFDOORS 6DWLQGHFRUDWLYHVWLWFK

1%ULGJLQJ6WLWFK For overcasting, sewing on elastic, darning tears

and inserting patches

0/1 Greek stitch $WUDGLWLRQDOGHFRUDWLYHVWLWFKHJIRUERUGHUV

and towels

0/1 6KHOOHGJLQJVWLWFK )RUGHFRUDWLYHKHPVRQÀQHPDWHULDOVHJOLQHQ

0 Reinforced straight

stitch * For stretch seams, e.g. crotch seams on sports-

and workwear

1 Reinforced zigzag

stitch * For attaching elastic tape on elastic materials

1 Honeycomb stitch * For sewing on elastic threads, overlocking towel-

ling and for decorative hem seams

1 Edge stitch narrow * $GHFRUDWLYHVWLWFK

36XSHUVWUHWFK $GHFRUDWLYHVWUHWFKVWLWFK

1'HFRUDWLYHVWLWFK $GHFRUDWLYHVWLWFK

1&URVV6WLWFKHV $GHFRUDWLYHVWLWFK

1'HFRUDWLYHVWLWFK $GHFRUDWLYHVWLWFK

0 Federstich $GHFRUDWLYHVWLWFK

3 Closed overlock

stitch * $FORVLQJDQGVHUJLQJVHDPIRUIUD\LQJPDWHULDOV

32YHUORFNVWLWFK $FORVLQJDQGVHUJLQJVHDPIRUVWURQJHURUQRQ

fraying materials

* These stitches are stretch stitches

Stitch Overview – 160s

Stitch Name Description

23$ 4-step Buttonhole 6WDQGDUGEXWWRQKROH

06WUDLJKWVWLWFK For all straight stitching and topstitching

0=LJ]DJVWLWFK )RUVHUJLQJDQGDSSOLTXp

0 Triple zigzag stitch* For stitching on elastic band, darning tears and

patches

3 Elastic blindhem

stitch * For invisible hem attachment and simultaneous

serging, also for stretch fabrics

3 Blindhem stitch For invisible hem attachment

0/1 6KHOOHGJLQJVWLWFK )RUGHFRUDWLYHKHPVRQÀQHPDWHULDOVHJOLQHQ

0/1 Greek stitch $WUDGLWLRQDOGHFRUDWLYHVWLWFKHJIRUERUGHUV

and towels

1%ULGJLQJ6WLWFK For overcasting, sewing on elastic, darning tears

and inserting patches

1 Checker satin stitch 6DWLQGHFRUDWLYHVWLWFK

12SHQVFDOORS 6DWLQGHFRUDWLYHVWLWFK

0 Reinforced straight

stitch * For stretch seams, e.g. crotch seams on sports-

and workwear

1 Reinforced zigzag

stitch * For attaching elastic tape on elastic materials

1 Honeycomb stitch * For sewing on elastic threads, overlocking towel-

ling and for decorative hem seams

36XSHUVWUHWFK $GHFRUDWLYHVWUHWFKVWLWFK

1 Edge stitch narrow $GHFRUDWLYHVWLWFK

32YHUORFNVWLWFK $FORVLQJDQGVHUJLQJVHDPIRUVWURQJHURUQRQ

fraying materials

3 Closed overlock

stitch * $FORVLQJDQGVHUJLQJVHDPIRUIUD\LQJPDWHULDOV

0 Federstich $GHFRUDWLYHVWLWFK

1&URVV6WLWFKHV $GHFRUDWLYHVWLWFK

1'HFRUDWLYHVWLWFK $GHFRUDWLYHVWLWFK

* These stitches are stretch stitches

Stitch Overview – 140s

PREPARATIONS

Unpacking

 3ODFHWKHER[RQDVWHDG\ÁDWVXUIDFH/LIW

the machine out of the box, remove the

outer packaging and lift off the machine

carrying case.

2. Remove all outer packing material and the

plastic bag.

Note: Your SMARTER BY PFAFF™ 140s/160s

sewing machine is adjusted to provide the best stitch

result at normal room temperature. Extreme hot and

cold temperatures can affect the sewn result.

Connect to the Power Supply

$PRQJWKHDFFHVVRULHV\RXZLOOÀQGWKHSRZHU

plug and the foot control.

Note: Consult a qualified electrician if in doubt as

how to connect the machine to the power source. Un-

plug the power cord when the machine is not in use.

For this sewing machine, foot control model

)&9)&$)&'

9PXVWEHXVHG

1. Connect the plug of the foot control to

WKHFRQQHFWLQJVRFNHW$RIWKHVHZLQJ

machine and to the wall socket. The sewing

speed is regulated by pressing the foot

control.

2. Press the 2,VZLWFK%WR´,µWRWXUQRQ

power and light.

Pack away after Sewing

 6ZLWFKWKHPDLQVZLWFKRII

2. Unplug the cord from the wall socket and

then from the machine.

3. Unplug the foot control cord from the

machine. Wind the cord around the foot

control for easy storage.

4. Place all accessories in the accessory tray.

6OLGHWKHWUD\RQWRWKHPDFKLQHDURXQGWKH

free arm.

5. Place the foot control in the space above

the free arm.

6. Put on the hard cover.

For the USA and Canada

7KLVVHZLQJPDFKLQHKDVDSRODUL]HGSOXJRQH

blade wider than the other). To reduce the risk

RIHOHFWULFVKRFNWKLVSOXJLVLQWHQGHGWRÀWLQD

polarized outlet only one way. If the plug does

QRWÀWIXOO\LQWKHRXWOHWUHYHUVHWKHSOXJ,ILW

VWLOOGRHVQRWÀWFRQWDFWDTXDOLÀHGHOHFWULFLDQ

WRLQVWDOOWKHSURSHURXWOHW'RQRWPRGLI\WKH

plug in any way.

Free Arm

To use the free arm, slide off the accessory

tray. When attached, a hook keeps the acces-

sory tray securely attached to the machine.

Remove the tray by sliding it to the left.

Leveling the Machine Base Plate

To make sure your machine stands steadily on

your sewing surface you can adjust the base

plate height.

7XUQWKHEDVHSODWHDGMXVWLQJVFUHZ$E\

hand. Turn clockwise to lower and counter-

clockwise to raise the base plate.

Thread Cutter

To use the thread cutter, pull the thread from

EDFNWRIURQWDVVKRZQ%

Narrow thread spool

Large thread spool

Spool Pins

Your machine has two spool pins, a main

spool pin and an auxiliary spool pin. The

spool pins are designed for all types of

thread. The main spool pin is used in a

KRUL]RQWDOSRVLWLRQWKHWKUHDGUHHOVRIIWKH

spool) and the auxiliary spool pin in a verti-

FDOSRVLWLRQWKHWKUHDGVSRROURWDWHV8VH

the horizontal position for normal threads

and the vertical position for large spools or

specialty threads.

Main Spool Pin

Place a spool cap and the thread spool on

the spool pin. Make sure that the thread

reels off the spool counter clock-wise and

slide on a second spool cap.

Note: Not all thread spools are manufactured in

the same way. If you experience problems with

the thread, turn it in the opposite way or use the

vertical position.

Use a spool cap slightly larger than the

thread spool. For narrow thread spools, use

a smaller spool cap in front of the spool. For

large thread spools, use a larger spool cap

in front of the spool.

The flat side of the spool cap should be

pressed firmly against the spool. There

should be no space between the spool cap

and the thread spool.

Auxiliary Spool Pin

The auxiliary spool pin is used when wind-

ing a bobbin thread from a second spool of

thread or for a second spool when sewing

with a twin needle.

Insert the auxiliary spool pin into the hole at

WKHWRSRIWKHPDFKLQH$6OLGHRQDODUJH

spool cap and place a felt pad under the

thread spool. This is to prevent the thread

from reeling off too fast.

'RQRWSODFHDVSRROFDSRQWRSRIWKHVSRRO

pin as that would prevent the spool from

rotating.

Auxiliary spool pin

Threading the Machine

Make sure that the presser foot is raised and the needle is in its highest position.

 3ODFHWKHWKUHDGRQWKHVSRROSLQDQGÀWWKHDSSURSULDWHO\VL]HGVSRROFDS

 3XOOWKHWKUHDGLQWRWKHWKUHDGJXLGH$IURPIURQWWRWKHEDFN3XOOWKHWKUHDGEHWZHHQ

WKHWHQVLRQGLVFV%

 7KUHDGGRZQWKURXJKWKHULJKWWKUHDGLQJVORW&DQGWKHQXSZDUGVWKURXJKWKHOHIW

WKUHDGLQJVORW'

 %ULQJWKHWKUHDGIURPWKHULJKWLQWRWKHWDNHXSOHYHU(DQGGRZQLQWKHOHIWKDQG

WKUHDGLQJVORWLQWRWKHORZHUWKUHDGJXLGH)DQGWRWKHQHHGOHWKUHDGJXLGH*

5. Thread the needle.

Needle Threader

The integrated needle threader allows you

WRWKUHDGWKHQHHGOHTXLFNDQGHDV\

The needle must be in its highest position

to use the built-in needle threader. Turn the

handwheel until the notch on the wheel is

SRLQWLQJXSZDUGV$:HDOVRUHFRPPHQG

lowering the presser foot.

1. Use the handle (B) to pull the needle

threader all the way down. The metal

ÁDQJHVFRYHUWKHQHHGOH$VPDOOKRRN

ZLOOSDVVWKURXJKWKHQHHGOHH\H.

2. Place the thread from the back over the

WKUHDGJXLGH&DQGXQGHUWKHVPDOO

KRRN'

3. Let the needle threader gently swing

back. The hook pulls the thread through

the needle eye and forms a loop behind

the needle. Pull the thread loop out

behind the needle.

4. Raise the presser foot and place the

thread under it.

Note: The needle threader is designed to be used

for size 70-120 needles. You cannot use the

needle threader for size 60 needles or smaller,

wing needles or twin needles.

There are also some optional accessories that

require manual threading of the needle.

When threading the needle manually, make sure

that the needle is threaded from front to back.

Threading for Twin Needle

Replace the sewing needle with a twin needle. Make sure that the presser foot is raised and

the needle is in its highest position.

1. Place the thread spool on the spool pin

and fit the appropriately sized spool

cap. Insert the auxiliary spool pin.

6OLGHRQDODUJHVSRROFDSDQGDIHOW

pad. Place the second thread spool on

the spool pin.

2. Pull the threads into the thread guide

$IURPIURQWWRWKHEDFN3XOOERWK

WKUHDGVEHWZHHQWKHWHQVLRQGLVFV%

3. Thread down through the right

WKUHDGLQJVORW&DQGWKHQXSZDUGV

WKURXJKWKHOHIWWKUHDGLQJVORW'

4. Bring the threads from the right into

WKHWDNHXSOHYHU(DQGGRZQLQWKH

left threading slot. Place the threads

LQWRWKHORZHUWKUHDGJXLGH)3ODFH

one thread into the slot on the left side

RIWKHQHHGOHWKUHDGJXLGH*DQG

the other thread into the slot on the

right side of the needle thread guide

+0DNHVXUHWKDWWKHWKUHDGVGRQRW

become twisted.

5. Thread the needles manually from

front to back.

Note: When you are using a twin needle, you

might need to reduce the stitch width to pre-

vent damage of the twin needle, stitch plate

or presser foot. How much you need to reduce

it depends on the width and/or the size of the

twin needle.

Bobbin Winding

 3ODFHWKHWKUHDGVSRRORQWKHVSRROSLQ6OLGHD

spool cap tightly against the spool.

 3ODFHWKHWKUHDGLQWRWKHWKUHDGJXLGH$IURP

front to the back. Pull the thread clockwise around

WKHEREELQZLQGHUWHQVLRQGLVF%

 7KUHDGWKURXJKWKHKROHLQWKHEREELQ&IURP

the inside to the outside.

4. Place the bobbin on the bobbin spindle.

5. Push the bobbin spindle to the right to activate the bobbin winding. Press the foot

FRQWUROWRZLQGWKHEREELQ2QFHWKHEREELQEHJLQVWRZLQGFXWWKHH[FHVVWKUHDG

When the bobbin is full, the bobbin winding will slow down and stop automatically.

Push the bobbin spindle to the left. Remove the bobbin and cut the thread.

Inserting the Bobbin

Make sure that the needle is fully raised

and the machine is turned off before in-

serting or removing the bobbin.

 2SHQWKHEREELQFRYHUE\SXVKLQJ

WKHUHOHDVHEXWWRQWRWKHULJKW$

5HPRYHWKHFRYHU%

2. Insert the bobbin in the bobbin

case with the thread running in a

counterclockwise direction.

 3XOOWKHWKUHDGWKURXJKWKHVOLW&

4. Pull the thread clockwise until it

VOLSVLQWRWKHQRWFK'

5. Replace the bobbin cover.

Presser Foot Pressure

The presser foot pressure has been pre-set to

WKHVWDQGDUGYDOXH´µ,QPRVWFDVHV\RXGR

not need to adjust the presser foot pressure.

)RUVSHFLDOW\WHFKQLTXHVRUZKHQVHZLQJRQ

very light or heavy fabric, adjusting the pres-

sure can improve the result.

For very light fabrics, loosen the pressure by

turning the dial counterclockwise.

Note: If the dial is turned counterclockwise too

much, it could come off. If this happens, simply re-

place the dial and turn it clockwise until it stays in

place.

For heavy fabric, tighten the pressure by turn-

ing the dial clockwise.

Note: If the dial is turned clockwise until it comes

to a stop, it has reached the maximum pressure

available. Do not try to turn the dial any further!

Thread Tension

To set the thread tension, turn the dial on top

RIWKHPDFKLQH'HSHQGLQJRQWKHIDEULFEDW-

ting, thread, etc, the tension may need to be

adjusted.

For the best stitch appearance and durability,

make sure the needle thread tension is correctly

adjusted. For general sewing, the threads

evenly meet between the two layers of fabric

$

If the bobbin thread is visible on the top side

of the fabric, the needle thread tension is too

WLJKW%5HGXFHWKHQHHGOHWKUHDGWHQVLRQ

If top thread is visible on the underside of the

fabric, the needle thread tension is too loose

&,QFUHDVHWKHQHHGOHWKUHDGWHQVLRQ

For decorative stitches and buttonholes, the

top thread should be visible on the underside

of the fabric.

Make a few tests on a scrap piece of the fabric

you are going to sew and check the tension.

Correct tension

Tension too tight

Tension too loose

Needles

The sewing machine needle plays an important role

LQVXFFHVVIXOVHZLQJ8VHRQO\TXDOLW\QHHGOHV:H

recommend needles of system 130/705H. The needle

package included with your machine contains needles

RIWKHPRVWIUHTXHQWO\XVHGVL]HV

Universal Needle (A)

Universal needles have a slightly rounded point and

come in a variety of sizes. For general sewing in a vari-

ety of fabric types and weights.

Stretch Needle (B)

6WUHWFKQHHGOHVKDYHDVSHFLDOVFDUIWRHOLPLQDWH

VNLSSHGVWLWFKHVZKHQWKHUHLVDÁH[LQWKHIDEULF)RU

NQLWVVZLPZHDUÁHHFHV\QWKHWLFVXHGHVDQGOHDWKHUV

Marked with a yellow band.

Denim Needle (C)

'HQLPQHHGOHVKDYHDVKDUSSRLQWWRSHQHWUDWHWLJKWO\

ZRYHQIDEULFVZLWKRXWGHÁHFWLQJWKHQHHGOH)RUFDQ-

YDVGHQLPPLFURÀEHUV0DUNHGZLWKDEOXHEDQG

Note: Change the needle often. Always use a straight needle

with a sharp point (D).

A damaged needle (E) can cause skipped stitches, breakage

or snapping of the thread. A damaged needle can also dam-

age the stitch plate.

Do not use asymmetrical twin needles (F), since they may

damage your sewing machine.

A B

Changing the Needle

1. Loosen the needle screw. Use the screw-driver

if necessary.

2. Remove the needle.

 3XVKWKHQHZQHHGOHXSZDUGVZLWKWKHÁDWVLGH

away from you until it will go no further.

4. Tighten the needle screw as tight as it will go.

Lowering Feed Dogs

You can lower the feed dogs by moving

the switch at the back of the free arm to the

OHIW$0RYHWKHVZLWFKWRWKHULJKWLI\RX

wish to raise the feed dogs.

Note: The feed dogs will not raise immediately

when the lever is switched. Turn the handwheel

one full turn or start sewing to re-engage the

feed dogs.

Presser Foot Lift

The presser foot is lowered or raised with

WKHSUHVVHUIRRWOLIW%By raising the presser

foot lever as far as it goes the lift height of

the presser foot can be increased. This is

useful for easy removal of the presser foot

or when placing heavy fabrics under the

foot.

Changing the Presser Foot

Remove Presser Foot

Press the presser foot downwards until it

snaps off from the presser foot holder.

Attach Presser Foot

Place the presser foot under the presser foot

KROGHU$/LQHXSWKHFURVVSLQRQWKHIRRW

%ZLWKWKHJDSLQWKHSUHVVHUIRRWDQNOH&

Lower the presser foot lifter and the presser

foot will snap into the presser foot holder.

Note: Check that the presser foot is properly

attached by raising the presser foot lift.

Page is loading ...

Pfaff 160S Owner's manual

Brand: Pfaff

Model: 160S

Category: Sewing machines

Type: Owner's manual

This manual is also suitable for

140S

Download PDF

report

Pfaff 160S Owner's manual

This manual is also suitable for

Pfaff 160S Owner's manual

Related papers

Other documents