X 8
INSTALLATION GUIDELINES
KWIK PLUG™
CAUTION!
Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.
When working with power tools and sheet metal, gloves and eye protection are absolutely required.
2
3
4
8"
8"
1
Remove old vents. It may be necessary to “square up”
the hole to 8" x 8" maximum.
Fasten with eight 1 1/2" long roofing nails using the
pre-punched holes provided.
Nails must be installed in all 8 pre-punched locations.
Place a Kwik-Plug™ centered in the vent hole opening.
Use Kwik-Plug™ to repair any roof deck
damage under 8 inches square.
The Repair that Restores Roof Integrity
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
SIG SIGRC35 User manual
-
Textron GATOR LS50L Li-ion Battery Punch Driver User manual
-
Heritage Patios H1P252004320820 Owner's manual
-
WattAge Sopwith Camel EP Instructions For Final Assembly
-
Watts 7100462 Installation guide
-
Greenlee LS100X Intelli-PUNCH User manual
-
Hilti DX 36 Operating instructions
-
-
Havis-Shields KK-C-VAK User manual
-
