Livex Lighting 50698-91 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
50698-91
Type
Operating instructions

This manual is also suitable for

Livex Lighting 50698-91 is a hanging mount light fixture that provides ample lighting for any room, with the ability to adjust the hanging height to meet your specific needs. It includes all the necessary hardware for easy installation, and the safety lock feature ensures a secure and stable mount. The fixture supports GU10 bulbs, which are not included but can be easily purchased separately. It is recommended to use bulbs within the specified wattage to ensure optimal performance and longevity of the fixture.

Livex Lighting 50698-91 is a hanging mount light fixture that provides ample lighting for any room, with the ability to adjust the hanging height to meet your specific needs. It includes all the necessary hardware for easy installation, and the safety lock feature ensures a secure and stable mount. The fixture supports GU10 bulbs, which are not included but can be easily purchased separately. It is recommended to use bulbs within the specified wattage to ensure optimal performance and longevity of the fixture.

ASSEMBLING & INSTALLATION INSTRUCTIONS PRODUCT#
50694
50696 50698 50699 For Hanging Mount Light Fixture
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
MOUNTING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old
fixture and all hardware from Junction Box.
2. Carefully unpack your new fixture and lay out all the parts
on a clear area. Take care not to lose any small parts
necessary for installation.
3. Attach the mounting plate to the Junction Box with the two
junction box screws as shown. The side of the cross bar
marked "GND" must face out. The junction box is not
included.
4. By measuring, determine correct wires length of needed for
proper hanging height, then lock it securely with small screw(F).
Press the ‘cable lock’ and adjustment steel cable to the
proper length. Slide safety lock to the proper position, lock
it securely with the screws. ADVICE: if you do not adjust
hanging height later, you may properly cut the wire and
steel cable is too long parts.
5. While holding the canopy(A) towards the ceiling, connect
the electrical wires as Shown in Fig.2, making sure that all
wire nuts are secured. You may have to wrap the
connections with electrical tape. If your outlet has a
ground wire (green or bare copper), connect the fixture
ground wire to it. Otherwise connect fixture’s ground wire
directly to the Mounting strap with the green screw
provided. After wires are connected, tuck them carefully
inside the Junction Box.
6. Raise the canopy(A) onto the junction box, aligning screws
on mounting plate with mounting holes in canopy and lock
it securely with the ball nut(B). Raise the bulb(C: GU10,
included) inset the lamp holder of canopy and turn it until
tighten.
7. Install the light bulbs in accordance with the fixture’s
specifications. NOTE: DO NOT EXCEED THE
SPECIFIED WATTAGE.
8. Attach the glass shade (D) insert the lamp holder of lamp
body(E) and turn it until tighten.
Your installation is now complete. Return power to the
junction box and test the fixture.
Fig.1
A
B
C
Steel Cable
Safety
Lock
C
able
L
ock
Fig.2
MIN 90℃ SUPPLY CONDUCTORS
DOC20141250694
White or
HOUSE
Black
WIRES
(Hot)
Smooth
FIXTURE
WIRES
Black or
Ribbed
WIRES
FIXTURE
Bare Copper(Ground)
FIXTURE
WIRES
Copper
(Ground)
HOUSE
(Neutral)
WIRES
White
Bare
Green or
WIRES
HOUSE
  • Page 1 1

Livex Lighting 50698-91 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
50698-91
Type
Operating instructions
This manual is also suitable for

Livex Lighting 50698-91 is a hanging mount light fixture that provides ample lighting for any room, with the ability to adjust the hanging height to meet your specific needs. It includes all the necessary hardware for easy installation, and the safety lock feature ensures a secure and stable mount. The fixture supports GU10 bulbs, which are not included but can be easily purchased separately. It is recommended to use bulbs within the specified wattage to ensure optimal performance and longevity of the fixture.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents