Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Place PTO (Blade Engage) Lever in
Off position.
Insert key and turn to Start position.
Release after engine starts.
Place Shift Lever in N (neutral)
position.
Fully depress the Brake Pedal.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
778-11489
© 2007 13AX60KH
Is the battery connected? Fresh gas in the unit?
Refer to Operator’s Manual for troubleshooting tips.
Stopping the Unit
Didn’t Start?
Place PTO (blade engage)
lever in the Off position.
Turn key counterclockwise to
Stop position and remove key.
Depress and hold Brake Pedal.
Set parking brake by pushing
Parking Brake Lever down.
Release Brake Pedal.
Move throttle to Slow position.
Place shift lever in N (neutral)
position.
PTO (Blade
Engage) Lever
Shift
Lever
Throttle
Ignition
Switch
Brake
Pedal
1
2
3
4
5
6
1
2
3
4
Parking
Brake
Lever
Move
Throttle
to Choke
position.
Move
Throttle to
Fast (rabbit)
position.
-
1
Troy-Bilt 13AX60KH011 Fast Start Guide
- Type
- Fast Start Guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI