Construction Metals EV223-1/8 Operating instructions

Brand: Construction Metals

Model: EV223-1/8

Type: Operating instructions

This manual is also suitable for

Frieze

Block

Rafter

For houses with open sots, Eave Vents t

snugly between Rafters, replacing the

wooden 2 x 6 (or 2 x 4) Frieze Block. If the

vent doesn’t take up the whole space or a

rough opening hole can be cut in the

Frieze Block. Nail through the side anges

to secure the vent to the rafters.

Eave Vents have very sharp edges. Use gloves to prevent injury. This product is not recommended for direct contact with treated lumber.

Working above grade is inherently dangerous, be sure that proper fall protection measures are in place. When working with power tools and sheet metal,

gloves and eye protection are absolutely required.

These basic installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional,

and to check with your local building inspector or building permit office for approvals and possible variations that may apply.

EAVE VENTS

INSTALLATION GUIDELINES

EV145

EV223

EV614

EV622

Size N.F.V. Part # Rough Opening Gross Size

14 in. x 5 in. - 1/4 mesh - Stucco Flange - Galvanized 44 sq. in. EV145 14.75 in. x 4.75 in. 14.5 in. x 4.5 in.

22 in. x 3 in. - 1/4 mesh - Stucco Flange - Galvanized 39 sq. in. EV223 22.625 in. x 3.75 in. 22.375 in. x 3.5 in.

14 in. x 6 in. - 1/4 mesh - Regular Flange - Galvanized 44 sq. in. EV614 14.75 in. x 5.75 in. 14.5 in. x 5.5 in.

22 in. x 6 in. - 1/4 mesh - Regular Flange - Galvanized 71 sq. in. EV622 22.75 in. x 5.75 in. 22.5 in. x 5.5 in.