Toro Replacement Bag Kit, 37" Bagger Installation guide

Type
Installation guide
FORM NO. 3316-844 Rev A
The TORO Company - 1994
INSTALLATION
INSTRUCTIONS
REPLACEMENT BAG
PART NO. 93–3242
for 37” BAGGER
LOOSE PARTS
Bag 1 Install on Discharge Duct
Clamp 1
Description Qty
Where Used
INSTALL GRASS BAG
1. Slide the grass bag over the discharge duct so the
elastic band is past the two (2) ribs (Fig. 1).
2. Align the grass bag so the loop and the duct retainer
are up, in line (Fig. 1).
3. Place the clamp over the grass bag between the two
(2) ribs of the discharge duct (Fig. 1).
4. Tighten the clamp securely.
Figure 1
4. Clamp
5. Duct Retainer
1475
1
4
3
5
1. Grass Bag Loop
2. Elastic Band
3. Ribs
2
  • Page 1 1

Toro Replacement Bag Kit, 37" Bagger Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI