Smays SMAYS-MICRO-ETHERNET-FIRETV User manual

SMAYS

Setup

1. Connect Fire TV Stick to your TV’s HDMI port.

2. Connect the LAN adapter’s Micro USB connector into TV Stick, the LED indicator is

on.

3. Connect network cable to RJ45 port of this Ethernet adapter, the LED indicator in

working status (sparkle).

4. Plug 5V DC cable into DC hole

5. Connect DC-5V power adapter for auxiliary power supply.

6. Plug a USB flash drive or other USB external device into the HUB.

Note：

If the host and the Ethernet adapter cannot connect to the network normally, please

reconnect and test according to the above steps

What’s in the Package

1x Ethernet Adapter

1x 5 Feet DC Power Cable

Customers' satisfication is the final goal of our service. So, if there have any

problem of your purchase, please feel free send email to annie@smays.us.