2. Moen
  3. 6810BN

Moen 6810BN Dimensions Guide

  • Hello! I am an AI chatbot trained to assist you with the Moen 6810BN Dimensions Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
METHOD™
Single-Handle Lavatory Faucet
Models: 6810 series
with metal waste assembly
Bulk Model: 66810
with 50/50 waste assembly
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU
1 HOLE, 1-1/8" MIN. DIA. * USE A2020 EXTENSION KIT
FOR VESSEL SINK APPLICATIONS
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes metal or 50/50 waste assembly where noted
• Includes optional 3 hole deck plate (escutcheon)
• Flexible supplies with 3/8” compression fittings
OPERATION
• Temperature controlled by 100° arc of handle travel
FLOW
• Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
°
1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA
for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
Back
Splash
2-1/2" min
for lift rod
operation
**5" (127mm)
Vessel Extension x2
20"
(508mm)
13-1/4" (337mm)
OPEN POSITION
OPTIONAL ESCUTCHEON
6" x 2-1/8"
(152mm) x (54mm)
25”
(635mm)
2-1/2"
(64mm)
MAX.
1/8"
(5mm)
2"
(51mm)
Dia. of faucet base
2-1/2"
(64mm)
3.89758"
(99mm)
3-1/2”
(89mm)
4-1/4”
(108mm)
8-1/4”
(210mm)
LIFT ROD
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 8/15
There is more than 1 version of this model.
Page down to identify the version you have.
METHOD™
Single-Handle Lavatory Faucet
Models: 6810 series
with metal waste assembly
Bulk Model: 66810
with 50/50 waste assembly
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU
1 HOLE, 1-1/8" MIN. DIA. * USE A2020 EXTENSION KIT
FOR VESSEL SINK APPLICATIONS
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes metal or 50/50 waste assembly where noted
• Includes optional 3 hole deck plate (escutcheon)
• Flexible supplies with 3/8” compression fittings
OPERATION
• Temperature controlled by 100° arc of handle travel
FLOW
• Aerator is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
2"
(51mm)
Dia. of faucet base
2-1/2"
(64mm)
Back
Splash
2-1/2" min
for lift rod
operation
**5" (127mm)
Vessel Extension x2
20"
(508mm)
13-1/4" (337mm)
OPEN POSITION
OPTIONAL ESCUTCHEON
6" x 2-1/8"
(152mm) x (54mm)
25”
(635mm)
2-1/2"
(64mm)
MAX.
1/8"
(5mm)
3-1/2”
(89mm)
4-1/4”
(108mm)
8-1/4”
(210mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 8/15
/