M•pact System
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
1943060560320B687A
Rev. 5/16
ALIGN™ MOENTROL®
Single-Handle Tub/Shower Trim Only
Models: T3291 series - valve trim only
T3292 series - shower trim only
T3293 series - tub/shower trim
Valves: 63100, 3500 Series
6-25/32"
(173mm)
7"
(178mm)
7-13/32"
(188mm)
7-1/8"
(182mm)
2-27/32"
(13mm)
FAUCET DESCRIPTION
• Metal construction with chrome plated or brushed nickel finishes
• Includes showerhead, arm, flange and diverter spout
OPERATION
• Lever style handle with temperature indicator on the
escutcheon, pull-on/push-off operation
• Temperature operates through an 180° arc of handle
travel (full cold to full hot)
• Adjustable temperature limit stop to control maximum
hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
FLOW
• Showerhead limited to 2.5 gpm (9.5 L/min)
• NH Suffix models contain no showerhead
CARTRIDGE
• 1225® cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125-1,
and all applicable requirements referenced therein
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
7" (178mm)
MIN.
HOT
INLET
COLD
INLET
FINISHED
WALL LINE
C
5-1/2"
(140mm)
WALL OPENING
FLOOR
TUB RIM
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2-1/16" (52mm) MAX.
1-7/16" (37mm) MIN.
H
C
L
1-3/4" (44mm)
Rev. 6/02
MOENTROL
®
VALVE
Pressure-Balancing Valve with
Volume Control
Models: 3510 (IPS),3520 (CC) - Single Pack
63110 (IPS), 63120 (CC) - Bulk Packed
(Bulk packed 12 per carton)
NOTE: See reverse side
for illustrated parts
DESCRIPTION
• Brass construction
• Pressure balancing, four port valve design with volume
control and integral checks, 1/2” CC or IPS
connections
OPERATION
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintain selected
discharge temperature to ± 2°F
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all applicable requirements
referenced therein and complies with the applicable
requirements of ANSI A117.1
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
/