2. Kohler
  3. K-1842-47
K-1842-47

Kohler K-1842-47, K-1842-0, K-1842-7, K-1842-G9, K-1842-K4 Specification

  • Hello! I am an AI chatbot trained to assist you with the Kohler K-1842-47 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
•
Acrylic
•
Reinforced with fiberglass (FRP)
•
One-piece configuration
•
Attachment flanges
•
Four integral shelves
•
For new construction or complete remodel of tiled
showers only
•
14-5/8″ (37.1 cm) x 59-1/16″ (150 cm) visible
footprint
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z124.1.2
•
CSA B45.0
•
CSA B45.5
SCULPTED SHOWER STORAGE
K-1842
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Accessories:
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description Colors/Finishes
K-1842 Sculpted shower storage ❑ 0 ❑ Other_____
Recommended Accessories
K-1843 Sculpted shower seat ❑ 0 ❑ Other_____
Product Specification:
The sculpted shower storage shall be reinforced with fiberglass (FRP). Product shall have a visible footprint that is 14-5/8″ (37.1
cm) in width and 59-1/16″ (150 cm) in height. Product shall be one-piece configuration with attachment flanges. Product shall
include four integral shelves. Product shall be for new construction or complete remodel of tiled showers only. Sculpted shower
storage shall be Kohler Model K-1842-___.
Page 1 of 2
1071450-4-
B
USA: 1-800-4-KOHLER
Canada: 1-800-964-5590
kohler.com
Technical Information
Fixture:
Configuration one-piece
Weight 21 lbs (9.53 kg)
Installation Notes
IMPORTANT! This product is for new construction or
complete remodel (down to the stud framing) of tiled
showers only. Do not install this product to plastic walls
or any other material besides tile.
Install this product according to the installation guide.
Shimming may be required to create an even transition from
the wall material to the unit.
Placement of unit must be determined in advance. Installation
requires double studs at the desired location.
Product protrudes into the pocket stud. The intended pocket
stud should be free of plumbing, wiring, or other obstructions.
59-1/8"
(150.2 cm)
61-7/8"
(157.2 cm)
14-5/8"
(37.1 cm)
17-3/8"
(44.1 cm)
3-1/8"
(7.9 cm)
11-3/8"
(28.9 cm)
1/4"
(6 mm)
1/2"
(1.3 cm)
1-3/8"
(3.5 cm)
1/8"
(3 mm) R.
24-7/16"
(62.1 cm)
37-1/2"
(95.3 cm)
50-1/2"
(128.3 cm)
2" (5.1 cm)
1-3/8"
(3.5 cm)
1-3/8"
(3.5 cm)
Product Diagram
SCULPTED SHOWER STORAGE
Page2of2
1071450-4-
B
/