Fab Glass and Mirror CTB-FAB4900 Installation guide

Type
Installation guide

This manual is also suitable for

F AB GLASS
AND MIRROR
Fab Glass Mermaid Coffee Table
Installation Manual
SKU: CTR-FAB4900
CTW-FAB4900
CTB-FAB4900
www.fabglassandmirror.com Call: +1 888-474-2221 Fax: (614)-334-4919
Office Timing: 8:30 - 18:00 EST [email protected]
Thank you for your purchase! It is our desire to make your entire experience from
purchase to installation as easy as possible. We ask that you read each step of this
installation manual thoroughly to ensure proper installation of your Mermaid Coffee
Table. Our installation techniques are very important. Installing your table in any
manner other than the steps outlined in this manual may lead to structural failure of
your table.
It is your responsibility to see that your Glass Table is properly assembled, installed, and
cared for. Failure to follow instructions in this manual could result in serious injury. Use
this product with Glass cautions.
HARDWARE INCLUDED PER YOUR ORDER
CAUTION
Circle Rings
( Qty - 2)
Screw Rod
( Qty - 2)
Tighten Key
( Qty - 1)
Big Rubber
( Qty - 2)
Adjustable
Screw( Qty - 2)
Bolts
( Qty - 2)
1
2
3
4
By using your cutting tool,
carefully open the
package and remove
the table and hardware.
Put the table top on
the base as per the
shape.
1
Page
www.fabglassandmirror.com
+ 1 888-474-2221
Fragile Handle with care
FRAGILE
GLASS
F AB GLASS
AND MIRROR
Put 2 Rubber pads
on the bottom of the
base legs.
also put two adjustable
screws on the bottom
of the base for table
balancing.
Put the base on
the floor.
Rubber pads
Adjustable
Screw
5
6
Congratulations!
You have successfully installed
your New Mermaid Coffee Table
Now insert the
small rods.
Finally insert the bolt
and tight by tighten key.
Rods
Circle Rings
Bolt
Tighten Key
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Fab Glass and Mirror CTB-FAB4900 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI