EZ-FLO 10562 Installation guide

EZ-FLO
Brand
EZ-FLO
Model
10562
Category
Sanitary ware
Type
Installation guide

EZ-FLO 10562 is a 2-Handle Shower Faucet with a limited lifetime warranty. It features a metal handle and an index button. The installation requires a professional plumber and should not be attempted by the user. The faucet is adjustable, allowing the user to control the water temperature and flow rate. It is also easy to clean and maintain, with a smooth surface that resists corrosion and tarnishing. The faucet is designed to be durable and long-lasting, making it a great choice for any bathroom.

EZ-FLO 10562 is a 2-Handle Shower Faucet with a limited lifetime warranty. It features a metal handle and an index button. The installation requires a professional plumber and should not be attempted by the user. The faucet is adjustable, allowing the user to control the water temperature and flow rate. It is also easy to clean and maintain, with a smooth surface that resists corrosion and tarnishing. The faucet is designed to be durable and long-lasting, making it a great choice for any bathroom.

These are general installation guidelines ONLY and are by no means comprehensive. Installation should be performed by a professional plumber.
EZ-FLO International Inc. bears no responsibility for the improper installation or misuse of this product. These are only general recommendations.
Estas son guías de instalación SOLAMENTE y por ningún motivo son exhaustivas. La instalación debe ser realizada por un plomero profesional.
EZ-FLO International, Inc. no se responsabiliza por la instalación inadecuada o mal uso de este producto. Estas son solo recomendaciones generales.
© 2016 EZ-FLO INTERNATIONAL, INC.
2750 E. Mission Blvd. - Ontario, California, USA 91761
2-Handle Shower Faucet
Spanish
Limited
LIFETIME WARRANTY
Garantía de por vida limitada
10662/10562
Basic-N-Brass
1
2
3
4
5
6
7
8
9
10
12
13
14
15
16
20
19
18 17
11
21
10662 WITH SPOUT
10562 LESS SPOUT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Valve Body/Cuerpo de la válvula
Shower Flange/
Reborde de la ducha
Shower Arm/Brazo de ducha
Shower Head/
Alcachofa de la ducha
Teflon Tape/Cinta de teflón
O-Ring/O-Ring
Cartridge/
Cartucho
Screw/Tornillo
O-Ring/O-Ring
12 .
13 .
14 .
15 .
16 .
17.
18.
19 .
20.
21.
O-Ring/O-Ring
Spring/Resorte
Fixing Nut/Tuerca de Apriete
Metal Handle/Manija del metal
Index Button/Botón índice
Lock Nut/
Tuerca de seguridad
Spout/Pico
O-Ring/O-Ring
Escutcheon Ring/
Chapetón
Extender Sleeve/
Cubierta de la
Extensión
Extender/
Extensión
Union Tail/Cola Unión
4
1
2
3
4
5
For tub installation only, plug top outlet. For
shower installation only, plug bottom outlet.
cross-head
screwdriver
desarmador de
estrella
pipe joint tape
cinta adhesiva
para tubería
10" groove
joint pliers
pinzas de junta
ranurada 10”
clear silicone latex caulk
sellador silicona-latex
transparente
sponge or rag
esponja o trapo
adjustable wrench
llave inglesa
Tools and supplies you will need the following to install your new faucet
Herramientas y provisiones que necesitara para instalar su nuevo grifo
utility knife
cuchillo para uso general
spanner
llave (23 mm)
basin wrench
llave de lavabo
supply
de la fuente
pipe wrench
llave de pipa
tube cutter
cortador de tubos
hacksaw
Sierra para metales
hex wrench(s)
llave hexagonal de
Before You Begin:
Turn off water supply
Remove old faucet.
Close drain to avoid losing
small parts.
Cierre el desagüe para evitar
perder piezas pequeñas.
Antes de Comenzar:
Cierre el suministro de agua
Quite el grifo viejo.
Installation
Instalación
Cierre el suministro central de agua. Instale el
cuerpo de bronce en los soportes de la pared.
Conecte a tubos de suministro de agua de 1/2”.
Las piezas de conexión en el cuerpo estan roscadas
para tubos con rosca de 1/2” y tambien son
compatibles con cobre soldable de 1/2”.
Para instalar tina solamente, coloque el tapón en
la salida superior. Para instalar ducha solamente,
coloque el tapón en la salida inferior.
Thread escutcheon rings on to valves and
back against finished wall. Install the handle
assembly.
Enrosque los chapetones de las manijas a las
valvulas y contra la pared terminada. Instale
el resto de las piezas de ensamble de las manijas.
Turn on water. Slip on handles
loosely. Check for leaks. Flush both
hot and cold lines for one minute
each. Caution: Do not turn water
off and on repeatedly during initial
period.
Abra el agua. Inserte las manijas sin
apretar. Revise que no haya fugas.
Permita que el agua fria y caliente
fluyan por un minuto cada una.
Cuidado: No abra y cierre el agua
repetidamentedurante el periodo
inicial.
For tub and shower combined
installation, connect bottom outlet
to spout. Use new piece of 1/2”
threaded pipe and proper fittings.
Connect top outlet to shower arm
with proper fittings
.
Para una instalación combinada de tina
y ducha, conecte el tubo inferior a la
salida para tina. Utilice un nuevo tubo
con rosca de 1/2” y uniones apropiadas.
Connecte el brazo de la ducha a la salida
superior con accesorios apropiados.
Shut off main water supply. Install brass
waterway into wall studs. Install rigid casting
to 1/2” water lines.
Tail pieces on casting are threaded for 1/2”
threaded pipe and will accept 1/2”
sweat copper.
  • Page 1 1
  • Page 2 2

EZ-FLO 10562 Installation guide

EZ-FLO
Brand
EZ-FLO
Model
10562
Category
Sanitary ware
Type
Installation guide

EZ-FLO 10562 is a 2-Handle Shower Faucet with a limited lifetime warranty. It features a metal handle and an index button. The installation requires a professional plumber and should not be attempted by the user. The faucet is adjustable, allowing the user to control the water temperature and flow rate. It is also easy to clean and maintain, with a smooth surface that resists corrosion and tarnishing. The faucet is designed to be durable and long-lasting, making it a great choice for any bathroom.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents