TEAC SR-LUXi Owner's manual

Brand: TEAC

Model: SR-LUXi

Category: Supplementary music equipment

Type: Owner's manual

MANUAL DEL USUARIO

Qué puede hacer con esta unidad

. . . . 56

Qué hay en la caja . . . . . . . . . . . . . . . . 56

Antes de su utilización .............57

Identificación de las partes . . . . . . . . 59

Identificación de las partes (botones)

. . 60

Identificación de las partes (parte posterior)

. . 62

Ajuste del reloj . . . . . . . . . . . . . . . . . . . . 63

Escuchar un iPod/iPhone ..........64

Escuchar la radio FM ...............68

Sintonizar presintonías de FM. . . . . . 69

Escuchar una fuente externa . . . . . . 70

Utilización del ecualizador .........71

Utilización de la luz ................72

Temporizador de apagado . . . . . . . . 73

Temporizador despertador ........74

Solución de posibles fallos . . . . . . . . 77

Especificaciones ...................79

MODE D’EMPLOI

Ce que vous pouvez faire avec cet appareil

. . . 30

Contenu de l'emballage . . . . . . . . . . 30

Avant l’utilisation ..................31

Identification des parties . . . . . . . . . . 33

Identification des parties (touches)

....34

Identification des parties (arrière)

. . . . 36

Réglage de l'horloge . . . . . . . . . . . . . . 37

Écoute d’iPod/iPhone . . . . . . . . . . . . . 38

Écoute de la radio FM. . . . . . . . . . . . . . 42

Syntonisation FM préréglée . . . . . . . 43

Écoute d'une source externe . . . . . . 44

Emploi de l'égaliseur . . . . . . . . . . . . . . 45

Emploi de la lampe ................46

Minuterie d'extinction .............47

Réveil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Dépannage . . . . . . . . . . . . . . . . . . . . . . . 51

Caractéristiques techniques .......53

77-20SRLUX00120

ENGLISH

FRANÇAIS

ESPAÑOL

SR-LUXi

OWNER’S MANUAL

What You Can Do with This Unit ....4

What’s in the Box . . . . . . . . . . . . . . . . . . 4

Before Use ..........................5

Identifying the Parts ................7

Identifying the Parts (Buttons) ......8

Identifying the Parts (Back) ........10

Setting the Clock ..................11

Listening to an iPod/iPhone .......12

Listening to the FM Radio . . . . . . . . . 16

FM Preset Tuning ..................17

Listening to an External Source ....18

Using the Equalizer . . . . . . . . . . . . . . . . . 19

Using the Light ....................20

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . 21

Wake Up Timer ....................22

Troubleshooting. . . . . . . . . . . . . . . . . . . 25

Specifications . . . . . . . . . . . . . . . . . . . . . 27

TABLE-TOP AUDIO WITH ROOM LAMP

SYSTÈME AUDIO DE BUREAU AVEC LAMPE D’AMBIANCE

LUZ DE HABITACIÓN CON BASE PARA iPod

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the product’s enclosure

that may be of sufficient magnitude

to constitute a risk of electric shock to

persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11) Only use attachments/accessories specified by

the manufacturer.

12) Use only with the car t, stand,

tripod, bracket, or table

specified by

the manufacturer,

or sold with the

apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

Do not expose this apparatus to drips or splashes.

Do not place any objects lled with liquids, such

as vases, on the apparatus.

Do not install this apparatus in a confined space

such as a book case or similar unit.

The apparatus draws nominal non-operating

power from the AC outlet with its POWER or

STANDBY/ON switch not in the ON position.

The apparatus should be located close enough

to the AC outlet so that you can easily grasp the

power cord plug at any time.

The appliance coupler is used as the disconnect

device, the disconnect device shall remain readily

operable.

If the product uses batteries (including a battery

pack or installed batteries), they should not be

exposed to sunshine, re or excessive heat.

CAUTION for products that use replaceable lithium

batteries: there is danger of explosion if a battery is

replaced with an incorrect type of battery. Replace

only with the same or equivalent type.

Caution should be taken when using earphones or

headphones with the product because excessive

sound pressure (volume) from earphones or

headphones can cause hearing loss.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9) Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

IMPORTANT SAFETY

INSTRUCTIONS

CAUTION

DO NOT REMOVE THE EX TERNAL CASES OR

CABINETS TO EXPOSE THE ELECTRONICS. NO USER

SERVICEABLE PARTS ARE WITHIN.

IF YOU ARE EXPERIENCING PROBLEMS WITH

THIS PRODUCT, CONTACT TEAC FOR A SERVICE

REFERRAL. DO NOT USE THE PRODUCT UNTIL IT

HAS BEEN REPAIRED.

WARNING: TO PREVENT FIRE OR

SHOCK HAZARD, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR

MOISTURE.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

prov ide reaso nabl e p ro te c ti o n agains t h armf ul

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio

or television reception, which can be determined by

tur nin g th e eq u ip m e nt o f f a n d on , the us er is

encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the equipment and/or the

receiving antenna.

• Increase the separation between the equipment and

receiver.

• Co n ne c t t he e qu ip m en t i nto an o ut le t on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/ T V

technician for help.

CAUTION

Changes or modifications to this equipments not

exp ressly approve d by TEAC CORPOR AT ION for

compliance will void the user’s warranty.

For U.S.A.

iPod is a trademark of Apple Inc., registered in the U.S.

and other countries.

“Made for iPod” means that an electronic accessory

has been designed to connect specifically to iPod

and has been certified by the developer to meet

Apple performance standards.

iPhone is a trademark of Apple Inc.

“Works with iPhone” means that an electronic

accessory has been designed to connect specifically

to iPhone and has been certified by the developer to

meet Apple performance standards.

Apple is not responsible for the operation of this

device or its compliance with safety and regulatory

standards.

What’s in the Box

What You Can Do with This Unit

Remote control unit (RC-1231) x 1

Batteries (CR2032) x 2

for remote control unit and backup

Stereo mini-plug cable x 1

iPod/iPhone dock adapter x 3

AC adapter x 1

(PS-M0630 or PS-M0630US)

Power cord for AC adapter x 1

The shape of the plug varies according to the

region.

Owner’s manual (this document) x 1

Keep this manual in a safe place for future refer-

ence.

Warranty card x 1

Listening to an iPod/iPhone

e page 12

Listening to the FM radio

e page 16

Listening to an external

source

e page 18

Using the Equalizer

e page 19

Using the light

e page 20

Using the sleep timer with

light dimming

e page 21

Using the wake up timer

with light brightening

e page 22

Confirm that the standard accessories were supplied in the box.

Before Use (1)

CAUTION

When moving the unit, always lift it by the sides

with both hands.

Correct way to lift

Incorrect way to lift

A light is on the bottom of the

top side.

Do not pick the unit up as shown

in this illustration because this

could cause damage.

The voltage supplied to the unit should match

the voltage printed on the supplied AC adapter.

If you are in any doubt regarding this matter,

consult an electrician.

Do not open the cabinet as this might result in

damage to the circuitry or electrical shock. If a

foreign object should get into the unit, contact

your dealer or service company.

When removing the power plug from the wall

outlet, always pull directly on the plug. Never

yank on the cord.

Placement of the unit

Choose the installation location of your unit

carefully. Avoid placing it in direct sunlight or

close to a source of heat. Also avoid locations

subject to vibrations and excessive dust, heat, cold

or moisture.

As the unit may become warm during operation,

always leave sucient space around the unit for

ventilation.

Make sure there is at least 8” (20 cm) of space

above and at least 2” (5 cm) of space on each side

of the unit. Do not place anything on top of the

unit.

Do not place the unit on an amplier or receiver

or any other device that generates heat.

When the unit is turned on, switching on the

TV may cause lines to appear on the TV screen,

depending on the wave frequency of the TV

broadcast. This is not a malfunction in the unit

or the TV. If you see such lines, place this unit far

away from the TV set.

Maintenance

If the surface of the unit gets dirty, wipe it with

a soft cloth or use diluted mild liquid soap.

Allow the surface of the unit to dry completely

before using.

For safety, disconnect the power cord from

the socket before cleaning.

Never spray liquid directly on this unit.

Before Use (2)

Remote Control Unit

The included remote control unit allows the

unit to be operated from a distance.

Even if the remote control unit is used within

its effective range, operation by remote control

might be impossible if there are any obstacles

between the unit and the remote control.

If the remote control unit is operated near other

devices that generate infrared rays, or if other

remote controls that use infrared rays are operated

near the unit, this unit might operate incorrectly.

The other devices might also operate incorrectly.

Battery Installation

1. Remove the battery compartment cover.

2. Put the lithium battery (CR2032, 3V) in with the

+ side up.

3. Close the cover.

Battery Replacement

If the distance to the unit from which the

remote control can be used decreases, the

battery has lost its charge. If this happens,

replace the battery with a new one.

For information about the collection

of batteries, please contact your local

municipality, your waste disposal service or

the place where you purchased the items.

Precautions concerning batteries

Misuse of batteries could cause them to

rupture or leak, leading to fire, injury or

the staining of nearby things. Please read

and observe the following precautions

carefully.

Be sure to insert batteries with correct positive

(

) and negative (

) orientations.

If the remote control will not be used for a long

time (more than a month), remove the battery

to prevent it from leaking.

If a battery leaks, wipe away the leakage inside

the battery compartment and replace the bat-

tery with a new one.

Do not use batteries of types other than those

specied.

Do not heat or disassemble batteries. Never

throw batteries into re or water.

Do not carry or store batteries with other

metallic objects. The batteries could short cir-

cuit, leak or explode.

Identifying the Parts

Remote sensor

When operating the

remote control, point it

towards here.

Light control

Press this control to turn the light

on/off. The light turns on/off

gradually.

Turn this control to the right to make

the light brighter or to the left to

make it dimmer.

The light can be used even when the

stereo power is in standby (off).

Display

Light

Speakers

(Stereo)

iPod/iPhone dock

Insert an appropriate dock

adapter, and then insert an

iPod/iPhone.

G Pages12-13

Backup battery compartment

This battery supplies backup power

to the built-in clock and memory if

the unit is momentarily disconnected

from an AC outlet.

Installation

The total life of the backup battery is

about 72 hours.

Light angle control

Turn this to change

the angle of the light.

12 34

Identifying the Parts (Buttons)

ALARM

Hold down this button for more

than 3 seconds to enter the

wakeup timer setting mode.

This button is also used to turn

the wake up timer function on

and o.

G Page22

FUNCTION

Each time this button is

pressed, the source changes

as follows:

SNOOZE

After the wakeup timer

on time is reached, use

this button to turn the

unit to standby (o) for

10 minutes.

DIMMER

Use this button to set the

brightness of the display

to one of three levels.

SLEEP

Use this button

to set the sleep

timer.

G Page21

VOLUME (−/+)

Use these buttons

to adjust the

volume.

Standby/On ( )

Use this button to turn

the unit on or put it in

standby (o).

This button lights when

the unit is turned on.

This button does not

aect the light.

(External source)

To simplify explanations, instructions in this manual might

refer to the main unit or remote control only. In such cases,

the same controls on the remote control and main unit will

operate similarly.

SLEEP

Use this button to set the

sleep timer. G Page21

LIGHT buttons

These buttons can be used

even when the audio section

is in standby (o).

( ) This turns the light on/o.

( / ) These adjust the

brightness of the light.

STANDBY/ON ( )

Use this button to turn

the unit on or put it in

standby (o).

This button does not

aect the light.

VOLUME ( / )

Use these buttons to

adjust the volume.

EQ (Equalizer)

Use this button to set the

equalizer. G Page19

MEMORY (in FM mode)

Use this button to save a

station preset. G Page18

MUTE ( )

Use this button to

mute the sound.

Press this button

again to restore the

sound.

iPod/FM/AUX

Press these buttons to

select the desired sound

source.

Skip/Search (in iPod mode)

Use these buttons to skip to songs.

Hold down these buttons to search

for a part of a song.

G Page14

Tuner (in FM mode)

Use these buttons to tune in

stations. G Page16

iPod/iPhone control

buttons G Page14-15

Repeat ( ) MENU

Shue ( ) SELECT

Play/Pause ( )

Scroll (in iPod mode)

Use these buttons to scroll

up and down in a menu.

G Page15

Select preset (in FM mode)

Use these buttons to select

preset stations. G Page17

SNOOZE

After the wakeup timer

on time is reached, use

this button to turn the

unit to standby (o) for

10 minutes.

DIMMER

Use this button to set the

brightness of the display

to one of three levels.

Identifying the Parts (Back)

DC IN

Connect the supplied

AC adapter (PS-M0630

or PS-M0630US) to this

jack. Then, connect the

connector of the power

cord to the AC adapter.

CAUTION

After all other connec-

tions are complete,

connect the power

cord's plug to an AC

wall socket.

Use the supplied AC

adapter (PS-M0630 or

PS-M0630US). Do not

use any AC adapter

other than the one

included with this unit.

PHONES

To listen with headphones, rst lower the volume level to the

minimum. Then, insert the headphones plug into the

PHONES jack and adjust the volume.

The speakers of this unit will make no sound when

headphones are plugged in.

CAUTION

Do not connect headphones with the PHONES jack while

wearing them. Moreover, do not disconnect headphones or

turn the unit on or o while wearing them. Very loud sound

could be output from the headphones.

AVOID DAMAGING YOUR HEARING - Do not put on

headphones until after plugging them in.

CLOCK ADJ

Use this button to

adjust the clock.

G Next page

WAKE UP

Set the amount of time

that the light takes to

gradually brighten when

using the wake up timer.

G Page23

DST

Use this switch to

set daylight saving

time.

FM antenna

While in FM mode,

tune in an FM station

and extend the

antenna lead to nd

the best position for

reception.

AUX IN

Analog 2-channel audio

signals can be input using

the supplied stereo mini-

plug cable.

Connect this jack to the

output of the audio player.

G Page18

AC wall socket

Read the instructions of each component you intend to use with this unit.

Be sure to connect each plug securely. To prevent hum and noise, do not

bundle the connection cords.

Setting the Clock

Press and hold the CLOCK ADJ button on the

back for more than 3 seconds.

Release it when “12 H” or “24 H” blinks on the display.

When the power is first turned on, the display

brightness is at the lowest setting. To make it

brighter, press the DIMMER button.

If you do not press a button for 8 seconds, the clock

setting will end automatically.

If you want to change the hour mode, press a

VOLUME button (+ or −).

When set to 12-hour mode,

appears following PM

times. Nothing appears with AM times.

Press the CLOCK ADJ button again.

The “hour” value blinks.

Press a VOLUME button (+ or −) repeatedly to

set the current hour, and then press the CLOCK

ADJ button.

Press a VOLUME button (+ or −) repeatedly to

set the current minute, and then press the

CLOCK ADJ button.

Setting the

clock

is now completed

and the clock

starts from the 00 seconds.

Setting daylight saving time

To change the clock for daylight

saving time, set the DST switch to

ON.

Hold down

more than 3 sec.

Listening to an iPod/iPhone (1)

iPod/iPhone compatibility

Capacity

Connection to SR-LUXi

Charging through SR-LUXi

Capacity

Connection to SR-LUXi

Charging through SR-LUXi

Capacity

Connection to SR-LUXi

Charging through SR-LUXi

iPod 1st + 2nd

generation

5/10/

20GB

AUX

iPod 3rd

generation

10/15/20/

30/40GB

Dock*

iPod 4th

generation

20/40GB

Yes

Dock*

iPod 4th

generation

(color)

Yes

Dock*

20/30/40/

60GBU2

iPod 5th

generation

(video)

30/60/

80GB

Dock*

Yes

iPod classic

Yes

Dock*

80/120/

160GB

Yes

Dock*

iPod touch

1st

generation**

8/16/

32GB

iPod touch

2nd

generation**

8/16/

32/64GB

Yes

Dock*

iPhone

1st

generation**

4/8/

16GB

Yes

Dock*

iPhone

3G/3GS**

8/16/

32GB

Yes

4/6GB

iPod mini

Dock*

1/2/4GB

YesYes

iPod nano

1st generation

Dock*

Yes

iPod nano

2nd generation

(aluminium)

Dock*

2/4/8GB

iPod nano

3rd generation

(video)

Dock*

4/8GB

Yes

iPod nano

4th/5th

generation

Dock*

8/16GB

Yes

iPod shue

1st

generation

AUX

512MB/

1GB

1/2/4GB

iPod shue

2nd/3rd

generation

AUX

* About dock adapters

Please use the included dock adapter

that fits your iPod as shown in

section

on the next page.

If none of the dock adapters supplied

with this unit are compatible with

your iPod, use the dock adapter that

came with the iPod or a dock adapter

purchased from the Apple Store as

an optional accessory.

** Note about the use of iPod touch/iPhone

models

When using an iPod touch or an iPhone with this

unit, if you use any application other than the iPod

applications, the SR-LUXi power might turn on again

soon after it is turned off (put in standby). Since the

unit cannot turn the iPod touch/iPhone power off

when such an application is running, you must quit

such an application before turning the SR-LUXi off

(putting it in standby).

Setting the supplied dock adapter

Select the dock adapter that fits your iPod/

iPhone.

20 GB + U2

iPod with click wheel (20 GB)

iPod with click wheel U2 Special Edition (20 GB)

iPod with color display (20/30 GB)

iPod with color display U2 Special Edition (20 GB)

iPod with video (30 GB)

iPod with video U2 Special Edition (30 GB)

iPod Classic (80/120GB)

iPod Classic (160GB) (2009)

If none of the dock adapters supplied with this

unit are compatible with your iPod, use the dock

adapter that came with the iPod or a dock adapter

purchased from the Apple Store as an optional

accessory.

Use the AUX IN to connect devices that cannot be

used with the dock (page 18).

Insert the adapter into the SR-LUXi dock.

Fit the front edge of the adapter into the dock, and

then press the back edge of the adapter onto the

dock until a slight “click” is heard indicating that the

adapter is inserted correctly.

To remove the adapter, hold its left and right sides

and gently pull it up.

Compatible iPod/iPhone software

If your iPod/iPhone will not work with the SR-LUXi or with the

remote control unit, updating the software might solve the

problem.

60GB (color) + Photo 40/60 GB

iPod with click wheel (40 GB)

iPod with color display

(iPod photo) (40/60 GB)

iPod with color display (60 GB)

iPhone/iPod Classic 160 GB

iPhone 3G

iPhone 3G S

iPod with video (60/80 GB)

iPod Classic (160 GB) (2007)

Listening to an iPod/iPhone (2)

Playing music on an iPod/iPhone

Insert the iPod/iPhone into the dock.

If in another mode, press the FUNCTION button

to select iPod mode.

The unit starts playing music on the iPod/iPhone.

You can also use the iPod button on the remote

control unit to select iPod.

Pausing playback temporarily

Press the button on the iPod/iPhone or the Play/Pause

button (y/J) on the remote control during playback.

To resume playback, press the button again.

Searching for a part of a song

During playback, hold down a Search button (. or

/).

Release it when the part you want to listen to is found.

Skipping to the next or previous song

During playback, repeatedly press a Skip button (.

or /) until the desired song is found.

If the

button is pressed during playback, the

song being played will start playing again from

the beginning. To return to the beginning of the

previous song, press the

button twice.

Hold down

Returning to the previous iPod/iPhone menu

Press the MENU button.

This button has the same functions as its iPod

counterpart.

Selecting a menu item

Press a Scroll button (g or t) to scroll to the menu

item you want, and then press the SELECT button.

Activating the repeat mode

Depending on the iPod/iPhone model, each time the

REPEAT button (

) is pressed, its REPEAT setting is

changed as follows:

One All

O

OneAll O

Activating the shuffle mode

Pressing the Shuffle button ( ) turns the shuffle

mode on and off.

Listening to the FM Radio

Press the FUNCTION button to select FM.

You can also use the FM button on the remote

control unit to select FM.

Tune in a station.

Automatic selection

Hold down a Tuner button (g or t) for more than

2 seconds and release it when the frequency display

begins to change.

During the automatic selection,

appears

on the display. And when a station is tuned in, the

tuning process stops automatically.

Manual selection

Press a Tuner button (g or t) momentarily.

The frequency changes by a fixed step.

Press the button repeatedly until the station you want

to listen to is found.

Hold down

more than 2 sec.

If the reception is poor

Extend and turn the FM antenna to

improve the reception of a station.

FM Preset Tuning

Tune in a station that you want to save as a

preset (see previous page).

Press the MEMORY button.

XX appears on the display. (XX is the preset number.)

Within 3 seconds, select the preset number

where you want to store the station using the

select preset buttons (. and /).

Within 10 seconds, press the MEMORY button.

Saving the

selected station to the preset

is now

completed.

To save more presets, repeat steps

You can program up to 10 FM station presets.

Selecting a preset station

In FM mode, press a select preset

button (. or /) repeatedly

until the desired preset station is

found.

Listening to an External Source

Connect the AUX IN jack of the SR-LUXi to the

PHONES jack (audio output jack) of a portable

audio player using the supplied stereo mini-

plug cable.

You can use this means of connection to listen to

an iPod that do not have a dock connector.

For information on iPod/iPhone compatibility, see

page 12.

Press the FUNCTION button to select AUX.

You can also use the AUX button on the remote

control unit to select AUX.

Play the source, and adjust the volume of both

the SR-LUXi and the connected audio player.

When using the PHONES jack of the audio player,

you must adjust its volume or you might not hear

any sound from the SR-LUXi.

Turning the volume of the audio player up too high

might cause the sound output by the SR-LUXi to

be distorted. If this happens, reduce the volume

of the audio player until the distortion stops and

then adjust the volume level of the SR-LUXi to a

comfortable listening level.

You can adjust the sound according to the genre of the

music or your taste.

Each time the EQ button is pressed, the equalizer

setting is changed as follows:

(default)

Provides a heavy powerful sound; suitable for rock music.

Equalizer is o

Emphasizes vocal tones; suitable for popular music.

Suitable for ambient music.

A balanced sound; suitable for classical music.

Suitable for jazz music.

This operation is available for every sound source.

If you are also using the equalizer setting on your

iPod/iPhone or other audio player, the eects will

be combined and might not sound as expected.

We recommend that you use either this unit's

equalizer or the equalizer on your audio player in

most cases.

Using the Equalizer

Using the Light

Turning the light on/off

Press the light control on the side of the unit.

The power of the light and the audio section are

separate. You can use the light even if the audio

section is in standby (o).

The light gradually becomes brighter or dimmer

over a few seconds after the control is pushed.

You can use the LIGHT button (

) on the remote

control unit to turn on/o the light.

Adjusting the brightness

Turn the control on the side of the unit.

Turn it right to make the light brighter and to the

left to make it dimmer.

You can use the LIGHT buttons (+ or −) on the

remote control unit to adjust the brightness.

Adjusting the angle of the light

Turn the light angle control next to the light.

Page is loading ...

TEAC SR-LUXi Owner's manual

Brand: TEAC

Model: SR-LUXi

Category: Supplementary music equipment

Type: Owner's manual

Download PDF

report

in other languages

français: TEAC SR-LUXi Le manuel du propriétaire
español: TEAC SR-LUXi El manual del propietario

TEAC SR-LUXi Owner's manual

TEAC SR-LUXi Owner's manual

in other languages

Related papers

Other documents