2. Baby & children
  3. Toys & accessories
  4. Remote controlled toys
  5. Atomik
  6. Atomik Miss Excite Hydro 24in Brushless RC Boat

Atomik Atomik Miss Excite Hydro 24in Brushless RC Boat, 18003 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Atomik Atomik Miss Excite Hydro 24in Brushless RC Boat Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ATOMIK-RC.COM
INSTRUCTION MANUAL & TUNING GUIDE
ENGLISH PG 02-15
FRENCH PG 16-29
SPANISH PG 30-43
GERMAN PG 44-57
JAPANESE PG 58-71
24” RTR BRUSHLESS HYDROPLANE
18003
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
• Never swim out to retrieve an R/C boat that has stalled in the water. If you are going into the water, use
a small boat or kayak to retrieve your model, always wear a PFD (Personal Flotation Device).
• Never stand in the water when operating your model boat.
• Remain clear of the propeller when the boat is running. Pay extra close attention to loose clothing,
jewelry, long hair and anything that can be caught in the spinning prop. CAUTION: A spinning
propeller can cause severe injury.
• The propeller and other running hardware are very sharp. Use extreme caution when working on or
around these parts.
• Your model is operated by radio signals sent by the transmitter. This system is susceptible to interference
from other radio signal sources. Before using your model, make sure no one else is using the same
radio frequency and that there is no other interference in the area.
• Never operate your model near swimmers or wildlife. The size and speed of this model can cause severe
injury and damage if a collision occurs.
• Some of the electronic components may become very hot during use and can severely burn you if
touched before they cool. Let the model stand and cool down before handling the motor, ESC and cooling
components.
• The battery used in this model can be dangerous. If the battery gets hot during charging, discontinue charging
immediately and disconnect the battery from charger. Never leave batteries unattended while charging. If you
are unsure of how to charge this battery, please contact Atomik™ or seek the advice of your local hobby shop.
Never let children charge batteries without adult supervision.
• Charging and discharging batteries has the potential for serious injury to persons and damage to property. In
purchasing this product, the user agrees to accept responsibility for all such risks, and will not hold Atomik, it’s
affiliates, manufacturers, distributors, or retail partners responsible for any accident, injury to persons, or
damage to property resulting from the use of this product. This product contains chemicals known to the State of
California to cause cancer, birth defects and other reproductive harm. Be responsible, dispose of properly.
• Always check your model for loose screws and components before operating.
• Always unplug the battery before removing debris that has become tangled in the prop.
• Minors under the age of 18 require adult supervision when using this boat.
Miss Excite Hydroplane
Length: 22 in/559 mm
Beam: 10.75 in/273 mm
Height: 4.43 in/112.5 mm
Weight: 3.3 lbs/1.49 kg
Run Time: Up to 20 minutes
Atomik 60A Pro Marine
Brushless Speed Control
Continuous Current: 60A
Burst Current (10S): 120A
BEC Mode: Switch
BEC Output: 6V/3A
Battery Cells:
LiPO: 2-6
NiMH: 6-18
Weight: 93g
Water-Cooling Pipe Dia: 5mm
Size L*W*H*: 94x33x18mm
Radio Equipment
Transmitter: Atomik VR3S 2.4GHz
Dimensions: 230 x 175 x 75mm (hxwxd)
Weight: 1.4 lbs/0.64kg (w/batteries)
Receiver: Atomik 3Ch (8188)
Servos: High Torque Metal Gear
Speed: .17sec/60º
Torque: 107 oz/in (7.0kg.cm) @ 6v
Note! Product specifications are subject to change.
ESC
CG 165-185mm
mm
mm
mm
1
70
Thank you for purchasing your new Atomik™ Miss Excite 24” RTR Electric Boat. This RTR Electric Boat was
designed with both beginning R/C Boat hobbyists and die hard boat enthusiasts in mind. Racers will love the
adjustability and tunability of the hull and drive system, enthusiasts will enjoy it’s scale realism, and novice
hobbyists will enjoy how easy the Atomik™ Miss Excite 24” RTR Electric Boat is to drive. We hope you have as
much fun with your Atomik R/C Electric Boat as we did creating it. Not only did you purchase a top of the line R/C
Electric Boat, but you have also joined the Atomik Team and its world class product line and customer service.
Every Atomik R/C Electric Boat model is handmade using the latest manufacturing techniques with the highest
possible standards. Your model is unique and may have blemishes due to the nature of the manufacturing
process. This is normal, and further adds to your boats originality.
While the Atomik™ Miss Excite 24” RTR Electric Boat is incredibly fun, it is not a toy. It is very important that you
read and follow the steps detailed in this instruction and radio manual. Failure to follow the guidelines detailed in
these manuals could result in damage to property, permanent damage to your model, or personal injury. It is very
important to use this product responsibly. Following these maintenance and operating guidelines will ensure years
of enjoyable use. When operating your model, always keep clear of full-size boats, solid objects, animals and
people. For best results, operate your Atomik™ Miss Excite 24” RTR Electric Boat in calm water, low wind
conditions away from swimmers and wildlife. To avoid an out of control model, always perform a range check and
make sure that no other models are operating on the same frequency. Inspect your model for damaged props, loose
hardware and loose or missing screws before and after every run. If your model begins to operate erratically or if
you notice a change in its operation, stop using it immediately and do not use again until the issue is corrected.
Safety Precautions 1
Specifications 1
Thank You 2
General Guidelines 2
Included Items 2
Required Items 3
Radio 3
ESC 4-5
Batteries 6
Boat Stand 6
Propeller Install 6
Rudder Install 7
Antenna Install 7
Hatch Install 8
Basic Controls 8
Tuning Guide 9-10
Pre Run Checklist 10
Transporting Boat 10
Storing Boat 10
Maintenance 11
Parts List 11
Trouble Shooting 12
Warnings 12
Limited Warranty 12
Guarantee 12
Notice of Rights 12
Notice of Liability 12
Prop 65 Warning 12
FCC Warning 12
Setup Notes 13-15
INCLUDED ITEMS
TABLE OF CONTENTS
GENERAL GUIDELINES
THANK YOU
69
2
32
ATOMIK-RC.COM
COPYRIGHT © 2012 ATOMIK RC
Thank you for purchasing your new Atomik™ Miss Excite 24” RTR Electric Boat. This RTR Electric Boat was
designed with both beginning R/C Boat hobbyists and die hard boat enthusiasts in mind. Racers will love the
adjustability and tunability of the hull and drive system, enthusiasts will enjoy it’s scale realism, and novice
hobbyists will enjoy how easy the Atomik™ Miss Excite 24” RTR Electric Boat is to drive. We hope you have as
much fun with your Atomik R/C Electric Boat as we did creating it. Not only did you purchase a top of the line R/C
Electric Boat, but you have also joined the Atomik Team and its world class product line and customer service.
Every Atomik R/C Electric Boat model is handmade using the latest manufacturing techniques with the highest
possible standards. Your model is unique and may have blemishes due to the nature of the manufacturing
process. This is normal, and further adds to your boats originality.
While the Atomik™ Miss Excite 24” RTR Electric Boat is incredibly fun, it is not a toy. It is very important that you
read and follow the steps detailed in this instruction and radio manual. Failure to follow the guidelines detailed in
these manuals could result in damage to property, permanent damage to your model, or personal injury. It is very
important to use this product responsibly. Following these maintenance and operating guidelines will ensure years
of enjoyable use. When operating your model, always keep clear of full-size boats, solid objects, animals and
people. For best results, operate your Atomik™ Miss Excite 24” RTR Electric Boat in calm water, low wind
conditions away from swimmers and wildlife. To avoid an out of control model, always perform a range check and
make sure that no other models are operating on the same frequency. Inspect your model for damaged props, loose
hardware and loose or missing screws before and after every run. If your model begins to operate erratically or if
you notice a change in its operation, stop using it immediately and do not use again until the issue is corrected.
Safety Precautions 1
Specifications 1
Thank You 2
General Guidelines 2
Included Items 2
Required Items 3
Radio 3
ESC 4-5
Batteries 6
Boat Stand 6
Propeller Install 6
Rudder Install 7
Antenna Install 7
Hatch Install 8
Basic Controls 8
Tuning Guide 9-10
Pre Run Checklist 10
Transporting Boat 10
Storing Boat 10
Maintenance 11
Parts List 11
Trouble Shooting 12
Warnings 12
Limited Warranty 12
Guarantee 12
Notice of Rights 12
Notice of Liability 12
Prop 65 Warning 12
FCC Warning 12
Setup Notes 13-15
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
GENERAL GUIDELINES
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
THANK YOU
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
INCLUDED ITEMS
69
2
2
2
2
2
3
ATOMIK-RC.COM
18003
2
Page is loading ...
1. / 1.
2. 2.
3. 3.
1. 1.
2. 2.
3. 3.
4. 4.
1. / 1.
1. 1.
:
Atomik™ Atomik™ 90
30
Atomik™ 1-800-705-0620 (208-762-0620) E
[email protected]
Atomik™ ; Atomik™
Atomik™ 800-705-0620 (208-762-0620) E
[email protected]
Atomik™ Atomik™
()
(
)
FCC:
FCC ID: V6KCY300
:
: FCC 15B B
1 :
-
-
-
-
Atomik™( DVD)
[email protected]
Atomik™
()
CAUTION: LOW VOLTAGE CUT-OFF
Do not use “NO PROTECTION” when using LiPO battery packs. Monitor the battery pack temperatures after
each run. Do not allow the battery pack temperatures to exceed 120º F/ 52º C while in use. Select a higher low
voltage cut-off setting to help reduce the temperature of the battery packs. It is OK to use “NO PROTECTION”
when using NiCD or NiMH battery packs.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
ESC SETUP CONT.
Tuning
Category
Running
Mode
LiPO
Cell #
Low
Voltage
Cut-off
Timing
Forward
Only
Auto
Calculate
No
Protection
0º
Forward &
Backward
2
Cells
2.8V/Cell
3.75º
3
Cells
3.0V/Cell
7.5º
4
Cells
3.2V/Cell
11.25º
5
Cells
3.4V/Cell
15º
6
Cells
18.75º 22.5º 26.25º
BEEP TONES
“B”
1 Short Beep
“BB”
2 Short Beeps
“BBB”
3 Short Beeps
“BBBB”
4 Short Beeps
“Beep-”
1 Long Beep
“Beep-B”
1 Long
1 Short Beep
“Beep-BB”
1 Long
2 Short Beeps
“Beep-BBB”
1 Long
3 Short Beeps
1
FULL THROTTLE
Entering Program Mode
Shaded Fields are Factory Settings (Recommended).
Selecting Category
Selecting Value for Category
If you are unsure if you have exited the program mode, you can disconnect
the battery and your programming will be saved.
2
FULL to NEUTRAL
3
FULL THROTTLE
Turn on transmitter.
Hold full throttle and connect battery.
- Continue to hold full throttle until musical tone sounds (5 seconds).
* CONTINUE TO HOLD FULL THROTTLE WHILE MOVING ON TO STEP 2*
Your ESC will again emit a series of beep tones. The beep tones represent a
dierent value. (Review chart below for tone diagram).
To select a value, simply wait for the desired beep tones to emit and pull full throttle.
Move the throttle to the neutral position. Within 2 seconds you will exit program mode. If you
continue to full throttle position, you will go back to step #2 and you can select a different tuning
category.
The ESC will emit a series of beep patterns. Each pattern represents a category:
To select tuning category, move throttle to neutral after desired beep pattern sounds.
*YOU ARE NOW IN THE SELECTED TUNING CATEGORY*
1. “Beep” Running Mode
2. “Beep-Beep” LiPO Cells
3. “Beep-Beep-Beep” Low Voltage Cutoff Threshold
4. “Beep-Beep-Beep-Beep” Timing
67
4
5
ATOMIK-RC.COM
18003
4
Slide the prop onto the drive shaft making sure to align the notch with the drive dog. Use the supplied lock nut to secure the
prop to the propshafts. Use caution when installing the prop as it may have extremely sharp edges.
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
Always use a charger specifically rated to charge your batteries. Charging and discharging batteries has the potential
for serious injury to persons and damage to property. Caution: If batteries get hot during charging, discontinue charging
immediately and disconnect battery from charger. Never leave battery unattended while charging. If you are unsure of how
to charge this battery, please contact Atomik™ or seek the advice of your local hobby shop. Never let children charge
batteries without adult supervision.
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BOAT STAND
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
BATTERY INSTALLATION
4
Finished Stand
Finished Stand
Thin CA Glue
2
1
1
3
2
1.
2.
3. ()
4.
5.
6.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
5.
1367 V500 Marine Outrunner for Miss Ex 2000Kv
1398 Atomik Pro Brushless Marina 60AMP ESC
1825 Atomik High Torque Metal Gear Servo
1883 Rubber push Rod Seals - SJXL/King/Segad
1885 Aluminum Antenna Holder (Blue) - SJXL/King/Segad
1886 Antenna Tube - SJXL/King/Segad
1926 Silicone Water Cooling Tubing - 50cm
1930 Hull/Hatch Set - ME
1931 Hatch - ME
1932 Motor Mount - ME
1933 Drive Shaft Housing - ME
1934 Drive Tube - ME
1935 Flex Shaft - ME
1936 Rudder - ME
1937 Rudder Strut - ME
1938 Control Rod - ME
1939 Boat Stand - ME
1940 Turn Fin - ME
1962 Shaft Coupler 5mm
1975 Servo Mount - EKOS/ ME
1979 Drive Dog - EKOS/P1 KOS/ ME
1980 Prop Spacer - EKOS/P1 KOS/ ME
1981 3 Blade Prop D32 P1.4 - EKOS/ ME
1985 Prop Nut - EKOS/ P1KOS/ ME
1987 Ball Bearing 4 x 7 - EKOS/P1 KOS/ ME
1988 Ball Bearing 4 x 7 Flanged - EKOS/P1 KOS/ ME
5
66
1. Thread the antenna from inside the hull up
through the base of the antenna tube holder.
2. Thre
ad the antenna through the antenna tube.
3. Seat the antenna into the antenna tube holder
and then cover the end with the rubber cap.
4.
For added security, you can use a small piece of
silicone tubing to hold the antenna in place.
1. Slide pin through pivot
block. Apply thread lock and
tighten the set screw.
2. Attach the rudder assembly
with both screws. Note that
the clear (break-away) screw
is used on the bottom hole.
3. Slide the control rod through
the pivot block. Center
servo, apply thread lock,
and tighten set screw.
INSTALLING THE ANTENNA
INSTALLING THE RUDDER
Thread Lock
3
1
2
3x3mm Set Screw
3x3mm Set Screw
3mm Lock Nut
Needle Nosed Pliers
2.5mm
No.2
No.2
2.5mm
65
6
76
ATOMIK-RC.COM
COPYRIGHT © 2012 ATOMIK RC
1. Thread the antenna from inside the hull up
through the base of the antenna tube holder.
2. Thre
ad the antenna through the antenna tube.
3. Seat the antenna into the antenna tube holder
and then cover the end with the rubber cap.
4.
For added security, you can use a small piece of
silicone tubing to hold the antenna in place.
1. Slide pin through pivot
block. Apply thread lock and
tighten the set screw.
2. Attach the rudder assembly
with both screws. Note that
the clear (break-away) screw
is used on the bottom hole.
3. Slide the control rod through
the pivot block. Center
servo, apply thread lock,
and tighten set screw.
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE ANTENNA
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
INSTALLING THE RUDDER
Thread Lock
3
1
2
3x3mm Set Screw
3x3mm Set Screw
3mm Lock Nut
Needle Nosed Pliers
2.5mm
No.2
No.2
2.5mm
65
6
7
ATOMIK-RC.COM
18003
6
1 2
3
4
Secure the hatch by sliding the front pin into the hole at the front of the hull opening. The hatch should drop easily down
so that the magnets hold the hatch securely in place. To waterproof the hatch, use strips of clear tape to seal the lid on
all four sides.
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
BASIC CONTROLS
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
INSTALLING THE HATCH
Use the steering dual rate to adjust the steering sensitivity.
NOTE: To avoid flipping the boat, reduce the throttle to slow the boat while turning.
Refer to the radio manual that came with your kit for complete instructions.
WHEEL RIGHT WHEEL LEFT NEUTRAL THROTTLEWHEEL STRAIGHT
RUDDER RIGHT RUDDER LEFT FULL THROTTLERUDDER STRAIGHT
4mm
4mm187
( ) 0
2.5mm
/
(0)
1
2
__mm
2.5mm
: 71
7
64
1 2
3
4
:
2( )
Follow the same steps used to install the prop. If you are using a aftermarket prop, make sure it is sized for a 4mm prop
shaft. If you are not using a 4mm prop, you will need to shim the prop shaft or use an adapter to increase the diameter to
.187 inch.
The alignment of the propeller shaft is parallel to the bottom of
the hull (Keel) which is considered zero degrees (0 deg) and a
neutral setting. The thrust of the propeller is in line with the
center of the hull and has no effect on the hull ride angle.
Loosen the drive using a pair of needle nose pliers and a 2.5mm Hex Driver. Adjust the drive up or down to change the
running angle of the boat. Using a ruler, measure the distance from the top of the drive to the botom of the drive
mounting strut.
TUNING GUIDE
REPLACING/ UPGRADING THE PROP
ADJUST AND MEASURE THE DRIVE SHAFT
NEUTRAL THRUST ANGLE (0 DEGREES)
1
2
__mm
2.5mm
Hex Driver
Note: See page 15 to save your set up.
Bow Up
Neutral
Bow down
Bow Up
Neutral
Bow down
Needle Nosed Pliers
63
8
98
ATOMIK-RC.COM
COPYRIGHT © 2012 ATOMIK RC
1 2
3
4
:
2( )
Follow the same steps used to install the prop. If you are using a aftermarket prop, make sure it is sized for a 4mm prop
shaft. If you are not using a 4mm prop, you will need to shim the prop shaft or use an adapter to increase the diameter to
.187 inch.
The alignment of the propeller shaft is parallel to the bottom of
the hull (Keel) which is considered zero degrees (0 deg) and a
neutral setting. The thrust of the propeller is in line with the
center of the hull and has no effect on the hull ride angle.
Loosen the drive using a pair of needle nose pliers and a 2.5mm Hex Driver. Adjust the drive up or down to change the
running angle of the boat. Using a ruler, measure the distance from the top of the drive to the botom of the drive
mounting strut.
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
TUNING GUIDE
REPLACING/ UPGRADING THE PROP
ADJUST AND MEASURE THE DRIVE SHAFT
NEUTRAL THRUST ANGLE (0 DEGREES)
1
2
__mm
2.5mm
Hex Driver
Note: See page 15 to save your set up.
Bow Up
Neutral
Bow down
Bow Up
Neutral
Bow down
Needle Nosed Pliers
63
8
9
ATOMIK-RC.COM
18003
8
Page is loading ...
4mm 4mm
187
AtomikTM(
)
4
2
1
1
3
2
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
BOAT MAINTENANCE
DRIVE LINE
1. Remove the prop.
2. Loosen the motor coupler set screws for the flex cable.
3. Slide the flex cable out of the drive.
4. Lubricate the flex cable with marine grease.
5. Lubricate the drive ball bearings with a light oil for bearings.
6. Reassemble the drive and wipe away any excess grease and oil.
HULL
1. The hull requires very little maintenance, but must be kept in good condition in order to perform as expected and to
ensure safe operation.
2. Look closely at the exterior surfaces of the hull.
3. Check for damage, chips, cracks and scratches.
4. Determine if damage has weakened the fiberglass and take the appropriate action to fix the
damage. Scratches and hair line cracks are common and typically do not require any attention.
HARDWARE
1. Radio control boats experience high frequency vibrations and as a result the screws, nuts and bolts will become
loose.
2. Check all the motor hardware and motor mounts.
3. Check all running gear, hardware, rudder, drive, steering linkage, water-cooling system, etc.
4. Use Thread Lock on all metal to metal hardware contacts.
WHAT TO DO AFTER THE BOAT HAS BEEN SUBMERGED
1. Remove the motor and lubricate the bearings on the motor.
2. Remove the electronics.
3. Dry out the interior.
4. The servo, receiver and battery pack will need to be dried out and checked for proper operation before they are
used again.
5. Test the battery pack under load to make sure it is ok to continue regular use.
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
PARTS LIST
1367 V500 Marine Outrunner for Miss Ex 2000Kv
1398 Atomik Pro Brushless Marina 60AMP ESC
1825 Atomik High Torque Metal Gear Servo
1883 Rubber Push Rod Seals - SJXL/King/Segad
1885 Aluminum Antenna Holder (Blue) - SJXL/King/Segad
1886 Antenna Tube - SJXL/King/Segad
1926 Silicone Water-Cooling Tubing - 50cm
1930 Hull/Hatch Set - ME
1931 Hatch - ME
1932 Motor Mount - ME
1933 Drive Shaft Housing - ME
1934 Drive Tube - ME
1935 Flex Shaft - ME
1936 Rudder - ME
1937 Rudder Strut - ME
1938 Control Rod - ME
1939 Boat Stand - ME
1940 Turn Fin - ME
1962 Shaft Coupler 5mm
1975 Servo Mount - EKOS/ ME
1979 Drive Dog - EKOS/P1 KOS/ ME
1980 Prop Spacer - EKOS/P1 KOS/ ME
1981 3 Blade Prop D32 P1.4 - EKOS/ ME
1985 Prop Nut - EKOS/ P1KOS/ ME
1987 Ball Bearing 4 x 7 - EKOS/P1 KOS/ ME
1988 Ball Bearing 4 x 7 Flanged - EKOS/P1 KOS/ ME
Use high quality Marine
Grease to lubricate the flex
cable.
Motor Coupler Set ScrewMotor Coupler Set Screw
Lubricate the drive bearings
with a light bearing oil.
61
10
11
ATOMIK-RC.COM
18003
10
Problem Cause Fix
Speed Control does not operate. 1. Transmitter and/or receiver is not switched on. 1. Switch on.
2. Batteries are not fully charged. 2. Charge batteries.
3. Improper radio installation. 3. Reinstall correctly.
Motor does not operate. 1. Batteries are not fully charged. 1. Charge batteries.
2. Improper radio installation. 2. Reinstall correctly.
3. Loose motor wire connection. 3. Check connections.
4. Damaged motor. 4. Replace or Repair.
1. Flex shaft and/or bearings are dirty. 1. Clean and Regrease.
Motor rotates, but boat does not move.
Propellers do not rotate freely when
disconnected from the motors.
1. Motor coupler set screw is loose. 1. Tighten set screw.
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
WARNINGS / WARRANTY
FCC Warning:
FCC ID: V6KCY300
CAUTION: Atomik™ is not responsible for any radio or TV interference caused by unauthorized modications to this product. Changes or modications not
authorized by Atomik™ will void all warranties.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device, compliant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency
energy and, if not installed and used as instructed, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the
product on and o, correct the interference by trying one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
This product contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Be responsible, dispose of properly.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Charging and discharging batteries has the potential for serious injury to persons and damage to property. In purchasing this product, the user agrees to accept
responsibility for all such risks, and will not hold Atomik™, it’s aliates, manufacturers, distributors, or retail partners responsible for any accident, injury to
persons, or damage to property resulting from the use of this product.
Adult supervision is required when using this product. This product should be assembled by an adult before use. Proper assembly should be checked by an adult
before use. This product should be periodically examined by an adult for potential hazards. Any potential hazardous parts should be repaired or replaced.
WARNING:
This product may contain sharp edges or objects that can cause cuts or other bodily injury. To prevent cuts or other bodily injury, do not contact sharp edges or objects.
Important Notice
Atomik™ assumes sole responsibility for our products; therefore, dealers should not be involved in any warranty issues. All warranty claims are to be directed
to Atomik™ Customer Service. Before returning any defective product, please contact Atomik™ Customer Service at 800-705-0620 (208-762-0620) or
[email protected]om to receive a Return Merchandise Authorization Number. A dated & itemized sales receipt must accompany any product
returned for warranty work.
General Warranty Policies
Atomik™ warrants this product to be free of material and workmanship defects when new. Atomik™ will at its sole discretion repair or replace defective
components free of charge within 90 days from date of purchase or within 30 days for all electronic components.* This warranty does not cover wear and tear,
crash damage, modications, failure to perform routine maintenance, or any damages arising as a result of improper use. All warranty claims are to be directed
to Atomik™ Customer Service at 1-800-705-0620 (208-762-0620) or customerservice@atomik-rc.com.
GUARANTEE
All products are inspected and adjusted individually before leaving the manufacturer and are guaranteed to be free of material defects and manufacturing faults.
Actual product may vary from product shown. Product is subject to change.
Notice of Rights
All rights reserved. No part of this manual may be reproduced or transmitted in any form by any means, electronic, mechanical, photocopying, recording, or
otherwise, without the prior written permission of Atomik™. For information on getting permission for reprints and excerpts, contact
[email protected]om.
Notice of Liability
The information in this manual is distributed on an “As Is” basis, without warranty. While every precaution has been taken in the preparation of the manual, Atomik™
does not have any liability to any person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by the information
contained in this manual or by the products described in it.
Release of Liability
Atomik™, It’s aliates, manufacturers, distributors, or retail partners shall not be held liable for any accident, injury to persons, or damage to property resulting
from use, misuse, or abuse of any Atomik™ product. In purchasing a Atomik™ product the user agrees to accept responsibility for all such risks.
#1
ESC 2 ‘’
5
#2
‘ ’
3
1. ‘’
2. ‘’
3. ‘’
4. ‘’
#3
ESC
: 2
2
4
2 :
1:
3 2
2:
ESC
:
‘ ’
120o F/ 52o C
‘ ’ OK
ESC
Lipo
#
0º
2
2.8V/
3.75º
3
3.0V/
7.5º
4
3.2V/
11.25º
5
3.4V/
15º
6
18.75º 22.5º 26.25º
“B”
1
“BB”
2
“BBB”
3
“BBBB”
4
“-”
1
“-B”
1
1
“-BB”
1
2
“-BBB”
1
3
11
60
1
2
3
3
:VR3S
Atomik™ 24” RTRAtomik 60A
ESC
4 ESC
1)
2)
3)
4)
3
(Nimh)6
1521 AA Rechargeable NiMH
ECOAA8AA ECO Alkaline Batteries
1532 7.2v 6 cell 3000mAh NiMH Flat Pack
(Nimh)78
1532-7 8.4v 7 cell 3000mAh NiMH Hump Pack
1532-8 9.6v 8 cell 3000mAh NiMH Hump Pack
(Lipo)
1580 20C 4000mAh 11.1v LiPO
1581 20C 5400mAh 11.1v LiPO
15013 30C 3200mAh 14.8 LIPO
x8
1.5mm
2.0mm
2.5mm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
/#11
No.2
No.1
5.5mm
ESC
( )
EPA
REV
EPA
ST.
CHARGER
0657 Venom Pro Charger
SETUP NOTES
59
12
1312
ATOMIK-RC.COM
COPYRIGHT © 2012 ATOMIK RC
3
:VR3S
Atomik™ 24” RTRAtomik 60A
ESC
4 ESC
1)
2)
3)
4)
3
(Nimh)6
1521 AA Rechargeable NiMH
ECOAA8AA ECO Alkaline Batteries
1532 7.2v 6 cell 3000mAh NiMH Flat Pack
(Nimh)78
1532-7 8.4v 7 cell 3000mAh NiMH Hump Pack
1532-8 9.6v 8 cell 3000mAh NiMH Hump Pack
(Lipo)
1580 20C 4000mAh 11.1v LiPO
1581 20C 5400mAh 11.1v LiPO
15013 30C 3200mAh 14.8 LIPO
x8
1.5mm
2.0mm
2.5mm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
/#11
No.2
No.1
5.5mm
ESC
( )
EPA
REV
EPA
ST.
CHARGER
0657 Venom Pro Charger
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
SETUP NOTES
59
12
13
ATOMIK-RC.COM
18003
12
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Einlegen der 8 AA Batterien
Hinweis: Lesen Sie für weitere Anweisungen die
Anleitung des VR3S, die mit Ihrem Modell geliefert wurde.
Die wassergekühlte Atomik 60A Pro Marine bürstenlose Geschwindigkeitskontrolle, die mit Ihrem AtomikTM
Miss Excite 24“ RTR Rennboot mitgeliefert wurde, ist werksseitig vorprogrammiert.Sollten Sie es neu
programmieren wollen, befolgen Sie die Anweisungen unten.
ESC programmieren
Benutzen Sie den Sender, um das ESC in 4 einfachen Schritten zu programmieren:
1) Gehen Sie in den Programmmodus.
2) Wählen Sie das Programmmenü.
3) Wählen Sie den neu einzustellenden Wert der gewählten Zeit.
4) Beenden
AA Batterien
NiMH 6-Zellen-Pack
1521 AA Rechargeable NiMH
ECOAA8AA ECO Alkaline Batteries
1532 7.2V 6 cell 3000mAh NiMH Flat Pack
NiMH 7 und 8-Zellen-Pack
1532-7 8.4V 7 cell 3000mAh NiMH Hump Pack
1532-8 9.6V 8 cell 3000mAh NiMH Hump Pack
Gebogenen Schere
Spitzzange
Seitenschneider
LiPO-Batteriepack
1580 20C 4000mAh 11.1V LiPO
1581 20C 5400mAh 11.1V LiPO
15013 30C 3200mAh 14.8V LiPO
x8
Für den Sender
1.5mm
2.0mm
2.5mm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Messer #11 Klinge
Schraubendreher
No.2
No.1
Steckschlüssel
5.5mm
Lineal
Innensechskantschlüssel
Benötigte Teile
ESC-Einstellung
Die Fernbedienung
Ein-/Ausschalter
Trimmung für Lenkung
Steuerrad
Lenkungs-Endpunktabgleich
Reichweiten-Kontrolle
Umkehrschalter
Ausfallsicherung
Gas-Bremse-Endpunktabgleich
Regler für Dual Rate der Lenkung
Trimmung für Gas-Bremse-Funktion
Gas-Bremshebel
Batteriefach
CHARGER
0657 Venom Pro Charger
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
Remarques d'installation
45
26
27
ATOMIK-RC.COM
18003
26
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Deslice el propulsor por el eje transmisor asegurándose de alinear la muesca con el tope del eje. Use la contratuerca proporcionada para fijar el propulsor
en el eje. Tenga cuidado al instalar el propulsor, dado que puede presentar bordes muy afilados. Si está usando un propulsor de recambio, asegúrese de
que las medidas sean adecuadas para un eje de 4mm. Si no está usando un propulsor de 4mm, necesitará utilizar una arandela de ajuste o un adaptador
en el eje para aumentar el diámetro hasta 0,187 pulgadas.
Instalación del propulsor
Use siempre un cargador con las especificaciones adecuadas para cargar sus baterías. La carga y descarga de baterías es
causa potencial de lesiones personales graves y daños a la propiedad. Precaución: Si las baterías se calientan durante la carga,
detenga la carga inmediatamente y desconecte la batería del cargador. No deje nunca la batería desatendida durante la carga. Si
no está seguro de como cargar esta batería, por favor contacte con Atomik™ o aconséjese en su tienda de modelismo local. No
deje que los niños carguen las baterías sin la supervisión de un adulto.
Soporte del barco
Instalación de la batería
4
Soporte acabado
2
1
1
3
2
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Mantenimiento del barco
Eje motor
1. Extraiga el propulsor.
2. Afloje los tornillos de acople del motor para el cable flexible.
3. Deslice el cable flexible hacia fuera del eje.
4. Lubrique el cable flexible con grasa marina.
5. Lubrique los cojinetes del eje con un aceite para cojinetes suave.
6. Vuelva a montar la unidad y limpie cualquier exceso de grasa y aceite.
Casco.
1. El casco requiere muy poco mantenimiento pero debe dejarse en buenas condiciones para asegurar un rendimiento
óptimo y un uso seguro.
2. Compruebe de cerca las superficies exteriores del casco.
3. Compruebe que no haya daños, muescas, grietas o rasguños.
4. Determine si los daños han debilitado la fibra de vidrio y tome las medidas necesarias para remendar los daños. Los
rasguños y pequeñas fisuras son comunes y no acostumbran a requerir atención.
Partes
1. Los barcos por radiocontrol experimentan vibraciones de alta frecuencia y, consecuencialmente, los tornillos,
tuercas y pernos seaflojarán.
2. Compruebe todas las partes del motor y piezas acopladas.
3. Todas las partes móviles, componentes, timón, eje, dirección, sistema de refrigeración por agua, etc.
4. Use fijador de tornillos en todos los contactos metal con metal de las partes.
QUÉ HACER DESPUÉS DE QUE EL BARCO SE HAYA SUMERGIDO
1. Extraiga el motor y lubrique los cojinetes de los motores.
3. Extraiga los componentes electrónicos.
3. Seque el interior.
4. El servomotor, receptor y packs de batería necesitaran secarse y comprobarse para un buen funcionamiento
antes de volver a usarse.
5. Compruebe los packs de baterías bajo carga para comprobar que están preparados para continuar con un uso
regular.
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
Lista de partes
1367 V500 Marine Outrunner for Miss Ex 2000Kv
1398 Atomik Pro Brushless Marina 60AMP ESC
1825 Atomik High Torque Metal Gear Servo
1883 Rubber push Rod Seals - SJXL/King/Segad
1885 Aluminum Antenna Holder (Blue) - SJXL/King/Segad
1886 Antenna Tube - SJXL/King/Segad
1926 Silicone Water-Cooling Tubing - 50cm
1930 Hull/Hatch Set - ME
1931 Hatch - ME
1932 Motor Mount - ME
1933 Drive Shaft Housing - ME
1934 Drive Tube - ME
1935 Flex Shaft - ME
1936 Rudder - ME
1937 Rudder Strut - ME
1938 Control Rod - ME
1939 Boat Stand - ME
1940 Turn Fin - ME
1962 Shaft Coupler 5mm
1975 Servo Mount - EKOS/ ME
1979 Drive Dog - EKOS/P1 KOS/ ME
1980 Prop Spacer - EKOS/P1 KOS/ ME
1981 3 Blade Prop D32 P1.4 - EKOS/ ME
1985 Prop Nut - EKOS/ P1KOS/ ME
1987 Ball Bearing 4 x 7 - EKOS/P1 KOS/ ME
1988 Ball Bearing 4 x 7 Flanged - EKOS/P1 KOS/ ME
Use grasa marina de alta calidad
para lubricar el cable flexible.
Tornillo de acople del motorTornillo de acople del motor
Lubrique los cojinetes del eje con
un aceite para cojinetes suave.
33
38
39
ATOMIK-RC.COM
18003
38
Page is loading ...
Instale 8 pilas AA
Nota: Para instrucciones más detalladas, por favor refiérase
al manual de instrucciones VR3S que le fue proporcionado
con su modelo.
El control de velocidad marino sin cepillo Atomik 60A Pro refrigerado por agua que le fue proporcionado con
su barco eléctrico Miss Excite Atomik™ 24" RTR viene pre-programado de fábrica. Si necesita
re-programarlo, por favor siga las instrucciones indicadas abajo.
Programar el ESC (control de velocidad electrónico)
Use su transmisor para programar el ESC (control de velocidad electrónico) en 4 fáciles pasos::
1) Entre en el modo de programa.
2) Seleccione el articulo programable.
3) Escoja el nuevo valor para el articulo seleccionado.
4) Salga
Pilas AA
Packs de baterías NiMh de 6 células
1521 AA Rechargeable NiMH
ECOAA8AA ECO Alkaline Batteries
1532 7.2V 6 cell 3000mAh NiMH Flat Pack
Packs de baterías NiMh de 7 y 8 célulasS
1532-7 8.4V 7 cell 3000mAh NiMH Hump Pack
1532-8 9.6V 8 cell 3000mAh NiMH Hump Pack
Tijeras curvadas
Alicates de pico plano
Alicates de corte
Packs de baterías LiPO
1580 20C 4000mAh 11.1V LiPO
1581 20C 5400mAh 11.1V LiPO
15013 30C 3200mAh 14.8V LiPO
x8
Para el radiocontrol
1.5mm
2.0mm
2.5mm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Cuchilla de modelismo con hoja #11
Destornillador
de estrella
No.2
No.1
Destornillador
para tuercas
5.5mm
Regla de ángulo recto
Destornillador
hexagonal
Artículos necesarios
Configuración del ESC (control de velocidad electrónico)
El radiocontrol
Interruptor de encendido
Ajuste de la dirección (ST. TRIM)
Volante
EPA de dirección (ST)
Test de rango
Interruptor REV de inversión
Mecanismo de seguridad
ante fallos (F/S)
EPA de aceleración (TH)
Tasa doble de giro (ST D/R)
Ajuste del acelerador (TH. TRIM)
Gatillo acelerador
Caja de la batería
CHARGER
0657 Venom Pro Charger
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
Notas de ajuste
31
40
41
ATOMIK-RC.COM
18003
40
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Installez les 8 batteries AA.
Remarque : Pour des consignes plus détailles, veuillez vou
s reporter au mode d'emploi VR3S fourni avec la maquette.
La commande de vitesse sans balai 60 A à refroidissement par eau Atomik Marine Pro fournie avec le
bateau électrique AtomikTM Miss Excite 24” RTR est préprogrammée en usine. S'il vous faut le
reprogrammer, veuillez suivre les consignes ci-dessous.
Programmation du variateur de vitesse électronique
Utilisez votre émetteur pour programmer le variateur de vitesse électronique en 4 étapes simples :
1) Entrez le mode de programmation.
2) Choisissez les éléments programmable.
3) Choisissez la nouvelle valeur de l'heure choisie.
4) Quittez
Batteries AA
Pack de batteries de 6 cellules Nimh
1521 AA Rechargeable NiMH
ECOAA8AA ECO Alkaline Batteries
1532 7.2V 6 cell 3000mAh NiMH Flat Pack
Pack de batteries de 7 et 8 cellules Nimh
1532-7 8.4V 7 cell 3000mAh NiMH Hump Pack
1532-8 9.6V 8 cell 3000mAh NiMH Hump Pack
Ciseaux courbés
Pinces plates
Pinces coupantes
Packs de batteries Lipo
1580 20C 4000mAh 11.1V LiPO
1581 20C 5400mAh 11.1V LiPO
15013 30C 3200mAh 14.8V LiPO
x8
Pour radio
1.5mm
2.0mm
2.5mm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Lame n°11 de couteau de poche
Tournevis
No.2
No.1
Clé emmanchée
5.5mm
Règle à dresser
Tournevis hexagonal
Éléments nécessaires
Installation du variateur de vitesse électronique
La radio
Mise en marche
Trim de direction
Volant de direction
Fin de course de direction
Test de portée
Commutateur d'inversion
Sécurité dysfonctionnement
Fin de course gaz
Double taux de direction
Trim des gaz
Gâchette des gaz
Logement piles
CHARGER
0657 Venom Pro Charger
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
Einstellungshinweise
17
54
55
ATOMIK-RC.COM
18003
54
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
3
:VR3S
Atomik™ 24” RTRAtomik 60A
ESC
4 ESC
1)
2)
3)
4)
3
(Nimh)6
1521 AA Rechargeable NiMH
ECOAA8AA ECO Alkaline Batteries
1532 7.2v 6 cell 3000mAh NiMH Flat Pack
(Nimh)78
1532-7 8.4v 7 cell 3000mAh NiMH Hump Pack
1532-8 9.6v 8 cell 3000mAh NiMH Hump Pack
(Lipo)
1580 20C 4000mAh 11.1v LiPO
1581 20C 5400mAh 11.1v LiPO
15013 30C 3200mAh 14.8 LIPO
x8
1.5mm
2.0mm
2.5mm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
/#11
No.2
No.1
5.5mm
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
(
(
(
(
(
(
)
)
)
)
)
)
)
( )
EPA
REV
EPA
ST.
CHARGER
0657 Venom Pro Charger
SETUP NOTES
59
12
Problem Cause Fix
Speed Control does not operate. 1. Transmitter and/or receiver is not switched on. 1. Switch on.
2. Batteries are not fully charged. 2. Charge batteries.
3. Improper radio installation. 3. Reinstall correctly.
Motor does not operate. 1. Batteries are not fully charged. 1. Charge batteries.
2. Improper radio installation. 2. Reinstall correctly.
3. Loose motor wire connection. 3. Check connections.
4. Damaged motor. 4. Replace or Repair.
1. Flex shaft and/or bearings are dirty. 1. Clean and Regrease.
Motor rotates, but boat does not move.
Propellers do not rotate freely when
disconnected from the motors.
1. Motor coupler set screw is loose. 1. Tighten set screw.
TROUBLE SHOOTING
WARNINGS / WARRANTY
FCC Warning:
FCC ID: V6KCY300
CAUTION: Atomik™ is not responsible for any radio or TV interference caused by unauthorized modications to this product. Changes or modications not
authorized by Atomik™ will void all warranties.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device, compliant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency
energy and, if not installed and used as instructed, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the
product on and o, correct the interference by trying one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
This product contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Be responsible, dispose of properly.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Charging and discharging batteries has the potential for serious injury to persons and damage to property. In purchasing this product, the user agrees to accept
responsibility for all such risks, and will not hold Atomik™, it’s aliates, manufacturers, distributors, or retail partners responsible for any accident, injury to
persons, or damage to property resulting from the use of this product.
Adult supervision is required when using this product. This product should be assembled by an adult before use. Proper assembly should be checked by an adult
before use. This product should be periodically examined by an adult for potential hazards. Any potential hazardous parts should be repaired or replaced.
WARNING:
This product may contain sharp edges or objects that can cause cuts or other bodily injury. To prevent cuts or other bodily injury, do not contact sharp edges or objects.
Important Notice
Atomik™ assumes sole responsibility for our products; therefore, dealers should not be involved in any warranty issues. All warranty claims are to be directed
to Atomik™ Customer Service. Before returning any defective product, please contact Atomik™ Customer Service at 800-705-0620 (208-762-0620) or
[email protected]om to receive a Return Merchandise Authorization Number. A dated & itemized sales receipt must accompany any product
returned for warranty work.
General Warranty Policies
Atomik™ warrants this product to be free of material and workmanship defects when new. Atomik™ will at its sole discretion repair or replace defective
components free of charge within 90 days from date of purchase or within 30 days for all electronic components.* This warranty does not cover wear and tear,
crash damage, modications, failure to perform routine maintenance, or any damages arising as a result of improper use. All warranty claims are to be directed
to Atomik™ Customer Service at 1-800-705-0620 (208-762-0620) or customerservice@atomik-rc.com.
GUARANTEE
All products are inspected and adjusted individually before leaving the manufacturer and are guaranteed to be free of material defects and manufacturing faults.
Actual product may vary from product shown. Product is subject to change.
Notice of Rights
All rights reserved. No part of this manual may be reproduced or transmitted in any form by any means, electronic, mechanical, photocopying, recording, or
otherwise, without the prior written permission of Atomik™. For information on getting permission for reprints and excerpts, contact
[email protected]om.
Notice of Liability
The information in this manual is distributed on an “As Is” basis, without warranty. While every precaution has been taken in the preparation of the manual, Atomik™
does not have any liability to any person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by the information
contained in this manual or by the products described in it.
Release of Liability
Atomik™, It’s aliates, manufacturers, distributors, or retail partners shall not be held liable for any accident, injury to persons, or damage to property resulting
from use, misuse, or abuse of any Atomik™ product. In purchasing a Atomik™ product the user agrees to accept responsibility for all such risks.
#1
ESC 2 ‘’
5
#2
‘ ’
3
1. ‘’
2. ‘’
3. ‘’
4. ‘’
#3
ESC
: 2
2
4
2 :
1:
3 2
2:
ESC
:
‘ ’
120o F/ 52o C
‘ ’ OK
ESC
Lipo
#
0º
2
2.8V/
3.75º
3
3.0V/
7.5º
4
3.2V/
11.25º
5
3.4V/
15º
6
18.75º 22.5º 26.25º
“B”
1
“BB”
2
“BBB”
3
“BBBB”
4
“-”
1
“-B”
1
1
“-BB”
1
2
“-BBB”
1
3
11
60
1
2
3
6160
ATOMIK-RC.COM
COPYRIGHT © 2012 ATOMIK RC
Page is loading ...
Page is loading ...
Page is loading ...
1 2
3
4
:
2( )
Follow the same steps used to install the prop. If you are using a aftermarket prop, make sure it is sized for a 4mm prop
shaft. If you are not using a 4mm prop, you will need to shim the prop shaft or use an adapter to increase the diameter to
.187 inch.
The alignment of the propeller shaft is parallel to the bottom of
the hull (Keel) which is considered zero degrees (0 deg) and a
neutral setting. The thrust of the propeller is in line with the
center of the hull and has no effect on the hull ride angle.
Loosen the drive using a pair of needle nose pliers and a 2.5mm Hex Driver. Adjust the drive up or down to change the
running angle of the boat. Using a ruler, measure the distance from the top of the drive to the botom of the drive
mounting strut.
TUNING GUIDE
REPLACING/ UPGRADING THE PROP
ADJUST AND MEASURE THE DRIVE SHAFT
NEUTRAL THRUST ANGLE (0 DEGREES)
1
2
__mm
2.5mm
Hex Driver
Note: See page 15 to save your set up.
Bow Up
Neutral
Bow down
Bow Up
Neutral
Bow down
Needle Nosed Pliers
63
8
1 2
3
4
Secure the hatch by sliding the front pin into the hole at the front of the hull opening. The hatch should drop easily down
so that the magnets hold the hatch securely in place. To waterproof the hatch, use strips of clear tape to seal the lid on
all four sides.
BASIC CONTROLS
INSTALLING THE HATCH
Use the steering dual rate to adjust the steering sensitivity.
NOTE: To avoid flipping the boat, reduce the throttle to slow the boat while turning.
Refer to the radio manual that came with your kit for complete instructions.
WHEEL RIGHT WHEEL LEFT NEUTRAL THROTTLEWHEEL STRAIGHT
RUDDER RIGHT RUDDER LEFT FULL THROTTLERUDDER STRAIGHT
4mm
4mm187
( ) 0
2.5mm
/
(0)
1
2
__mm
2.5mm
: 71
7
64
6564
ATOMIK-RC.COM
COPYRIGHT © 2012 ATOMIK RC
Page is loading ...
1. Thread the antenna from inside the hull up
through the base of the antenna tube holder.
2. Thre
ad the antenna through the antenna tube.
3. Seat the antenna into the antenna tube holder
and then cover the end with the rubber cap.
4.
For added security, you can use a small piece of
silicone tubing to hold the antenna in place.
1. Slide pin through pivot
block. Apply thread lock and
tighten the set screw.
2. Attach the rudder assembly
with both screws. Note that
the clear (break-away) screw
is used on the bottom hole.
3. Slide the control rod through
the pivot block. Center
servo, apply thread lock,
and tighten set screw.
INSTALLING THE ANTENNA
INSTALLING THE RUDDER
Thread Lock
3
1
2
3x3mm Set Screw
3x3mm Set Screw
3mm Lock Nut
Needle Nosed Pliers
2.5mm
No.2
No.2
2.5mm
65
6
Slide the prop onto the drive shaft making sure to align the notch with the drive dog. Use the supplied lock nut to secure the
prop to the propshafts. Use caution when installing the prop as it may have extremely sharp edges.
INSTALLING THE PROPELLER
Always use a charger specifically rated to charge your batteries. Charging and discharging batteries has the potential
for serious injury to persons and damage to property. Caution: If batteries get hot during charging, discontinue charging
immediately and disconnect battery from charger. Never leave battery unattended while charging. If you are unsure of how
to charge this battery, please contact Atomik™ or seek the advice of your local hobby shop. Never let children charge
batteries without adult supervision.
BOAT STAND
BATTERY INSTALLATION
4
Finished Stand
Thin CA Glue
2
1
1
3
2
1.
2.
3. ()
4.
5.
6.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
5.
1367 V500 Marine Outrunner for Miss Ex 2000Kv
1398 Atomik Pro Brushless Marina 60AMP ESC
1825 Atomik High Torque Metal Gear Servo
1883 Rubber push Rod Seals - SJXL/King/Segad
1885 Aluminum Antenna Holder (Blue) - SJXL/King/Segad
1886 Antenna Tube - SJXL/King/Segad
1926 Silicone Water Cooling Tubing - 50cm
1930 Hull/Hatch Set - ME
1931 Hatch - ME
1932 Motor Mount - ME
1933 Drive Shaft Housing - ME
1934 Drive Tube - ME
1935 Flex Shaft - ME
1936 Rudder - ME
1937 Rudder Strut - ME
1938 Control Rod - ME
1939 Boat Stand - ME
1940 Turn Fin - ME
1962 Shaft Coupler 5mm
1975 Servo Mount - EKOS/ ME
1979 Drive Dog - EKOS/P1 KOS/ ME
1980 Prop Spacer - EKOS/P1 KOS/ ME
1981 3 Blade Prop D32 P1.4 - EKOS/ ME
1985 Prop Nut - EKOS/ P1KOS/ ME
1987 Ball Bearing 4 x 7 - EKOS/P1 KOS/ ME
1988 Ball Bearing 4 x 7 Flanged - EKOS/P1 KOS/ ME
5
66
6766
ATOMIK-RC.COM
COPYRIGHT © 2012 ATOMIK RC
Slide the prop onto the drive shaft making sure to align the notch with the drive dog. Use the supplied lock nut to secure the
prop to the propshafts. Use caution when installing the prop as it may have extremely sharp edges.
INSTALLING THE PROPELLER
Always use a charger specifically rated to charge your batteries. Charging and discharging batteries has the potential
for serious injury to persons and damage to property. Caution: If batteries get hot during charging, discontinue charging
immediately and disconnect battery from charger. Never leave battery unattended while charging. If you are unsure of how
to charge this battery, please contact Atomik™ or seek the advice of your local hobby shop. Never let children charge
batteries without adult supervision.
BOAT STAND
BATTERY INSTALLATION
4
Finished Stand
Thin CA Glue
2
1
1
3
2
1.
2.
3. ()
4.
5.
6.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
5.
1367 V500 Marine Outrunner for Miss Ex 2000Kv
1398 Atomik Pro Brushless Marina 60AMP ESC
1825 Atomik High Torque Metal Gear Servo
1883 Rubber push Rod Seals - SJXL/King/Segad
1885 Aluminum Antenna Holder (Blue) - SJXL/King/Segad
1886 Antenna Tube - SJXL/King/Segad
1926 Silicone Water Cooling Tubing - 50cm
1930 Hull/Hatch Set - ME
1931 Hatch - ME
1932 Motor Mount - ME
1933 Drive Shaft Housing - ME
1934 Drive Tube - ME
1935 Flex Shaft - ME
1936 Rudder - ME
1937 Rudder Strut - ME
1938 Control Rod - ME
1939 Boat Stand - ME
1940 Turn Fin - ME
1962 Shaft Coupler 5mm
1975 Servo Mount - EKOS/ ME
1979 Drive Dog - EKOS/P1 KOS/ ME
1980 Prop Spacer - EKOS/P1 KOS/ ME
1981 3 Blade Prop D32 P1.4 - EKOS/ ME
1985 Prop Nut - EKOS/ P1KOS/ ME
1987 Ball Bearing 4 x 7 - EKOS/P1 KOS/ ME
1988 Ball Bearing 4 x 7 Flanged - EKOS/P1 KOS/ ME
5
66
67
ATOMIK-RC.COM
18003
66
Page is loading ...
Install 8 AA Batteries
Note: For more detailed instructions, please refer to the
VR3S instruction manual that came with your model.
The water-cooled Atomik™ 60A Pro Marine Brushless Speed Control that came in your Atomik™ Miss Excite
24” RTR Electric Boat is pre-programmed from the factory. If you need to re-program it, please follow the
instructions below.
Program the ESC
Use your transmitter to program the ESC in 4 easy steps:
1) Enter program mode.
2) Select programmable item.
3) Choose the new value of the selected time.
4) Exit
AA BATTERIES
NiMH 6 CELL STICK PACKS
1521 AA Rechargeable NiMH
ECOAA8AA ECO Alkaline Batteries
CHARGER
0657 Venom Pro Charger
1532 7.2V 6 cell 3000mAh NiMH Flat Pack
NiMH 7 and 8 CELL STICK PACKS
1532-7 8.4V 7 cell 3000mAh NiMH Hump Pack
1532-8 9.6V 8 cell 3000mAh NiMH Hump Pack
Curved Scissors
Needle Nosed Pliers
Side Cutters
LiPO BATTERY PACKS
RECOMMENDED BATTERY PACKS
1580 20C 4000mAh 11.1V LiPO
1581 20C 5400mAh 11.1V LiPO
15013 30C 3200mAh 14.8V LiPO
x8
For Radio
1.5mm
2.0mm
2.5mm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Hobby Knife #11 Blade
Screwdriver
No.2
No.1
Nut Driver
5.5mm
Ruler straight Edge
Hex Driver
REQUIRED ITEMS
ESC SETUP
THE RADIO
Power Switch
Steering Trim
Steering Wheel
Steering EPA
Range Test
REV Switch
Fail Safe
Throttle EPA
ST. Dual Rate
Throttle Trim
Throttle Trigger
Battery Box
3
68
69
ATOMIK-RC.COM
18003
68
Page is loading ...
Page is loading ...
Page is loading ...
/