Ibiza Light & Sound LEDSPOT10W Owner's manual

Brand
Ibiza Light & Sound
Model
LEDSPOT10W
Category
Stroboscopes & disco lights
Type
Owner's manual
FR - MANUEL D'UTILISATION - P. 3
DE - BEDIENUNGSANLEITUNG - S. 5
NL - HANDLEIDING - P. 6
ES - MANUAL DE USO - P. 7
SI - NAVODILA ZA UPORABO - S. 8
RO - MANUAL DE UTILIZARE - P. 10
FUNCTION DESCRIPTION & CHANNEL CHART - P. 11
Ref.
LEDSPOT10W (15-1097)
LED SPOT LIGHT
MANUAL
Imported from China by LOTRONIC S.A.
Avenue Zénobe Gramme 9
B-1480 Saintes
View the item on our website
Manual - LEDSPOT10W
2
©Copyright LOTRONIC 2019
INSTRUCTION MANUAL
EXPLANATION OF SYMBOLS
The unit complies with CE standards
For indoor use only
Don’t stare into the light beam
SAFETY INSTRUCTIONS
• Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
• Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting
to is not higher than that stated on the decal or rear panel of the xture.
• This product is intended for indoor use only!
• To prevent risk of re or shock, do not expose xture to rain or moisture. Make sure there are no ammable
materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be
sure that no ventilation slots are blocked.
• Maximum ambient temperature (Ta) is 40°C. Do not operate the xture at temperatures higher than this.
• In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the near
-
est authorized technical assistance center. Always use the same type of spare parts.
• Avoid direct eye exposure to the light source while it is on.
• The product is for decorative purposes only and not suitable as a household room illumination.
• The light source of this device is not replaceable. If it is defective, the entire unit must be discarded.
FEATURES:
• Display of running time
• Temperature control
• Manual Focus
HOW TO CONTROL THE UNIT
Access control panel functions using the four panel buttons located directly underneath the LCD Display.
Button Function
MENU Used to access the menu or to return to a previous menu option
UP Scrolls through menu options in ascending order
DOWN Scrolls through menu options in descending order
ENTER Used to select and store the current menu or option within a menu
MOUNTING
1. The spot light can be put everywhere, but you must leave a distance of at least 0.5m between the spot light
and an object. Keep the light stable
2. Connection to a DMX controller: The DMX512 signal must be connected to the INPUT and OUTPUT sockets
of the unit. Keep the cable run as short as possible in order to avoid signal losses and interference from other
units. The cable length should not be longer than 100m.
3. Use an standard 3-pin XLR lead to connect the unit to a DMX controller. The XLR connector is wired as
follows:
XLR WIRING
Pin 1 = Ground
Pin 2 = Data Compliment (negative)
Pin 3 = Data True (positive)
4. The focus can be set manually.
5. Display of running time (Press Down and Enter button)
UP
DOWN
MENU ENTER
8.8.8.8.
Manual - LEDSPOT10W
3
www.ibiza-light.com
FR
SPECIFICATIONS
Input voltage ......................................................................................................................................12V 3A
Light source .......................................................................................................................1x 10W RGBW LED
Power ........................................................................................................................................................13W
Rated life time of LED .................................................................................................50,000 operating hours
DMX channels ................................................................................................................................................6
Functions......................................................................................DMX, Auto-run Sound control, Master/slave
Net weight ..............................................................................................................................................0.6kg
Packing size .......................................................................................................................142 x 90 x 138mm
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the xture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.
• Clean with soft cloth using normal glass cleaning uid.
• Always dry the parts carefully.
• Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local au-
thorities or your dealer about the way to proceed.
MANUEL D’UTILISATION
EXPLICATION DES SYMBOLES
En conformité avec les exigences de la norme CE
Utilisation uniquement à l’intérieur
Ne pas regarder directement dans le rayon lumineux
CONSIGNES DE SÉCURITÉ
• Lisez attentivement ce manuel qui contient des informations importantes sur l’installation, l’utilisation et l’en-
tretien de cet appareil.
• Assurez-vous que la tension secteur convient à cet appareil et qu’elle ne dépasse pas la tension d’alimenta-
tion indiqué sur la plaque signalétique de l’appareil.
• Uniquement pour utilisation à l’intérieur!
• An d’éviter tout risque d’incendie ou de choc électrique, ne pas exposer cet appareil à la pluie ou à l’humidi-
té. Assurez-vous qu’aucun objet inammable ne se trouve à proximité de l’appareil pendant son fonctionne-
ment.
• Installez l’appareil à un endroit bien ventilé à une distance minimum de 50cm de toute surface. Assurez-vous
que les fentes de ventilation ne sont pas bloquées.
• La température ambiante ne doit pas dépasser 40°C. Ne pas faire fonctionner l’appareil à des températures
supérieures.
• En cas de dysfonctionnement, arrêtez immédiatement l’appareil. N’essayez jamais de réparer l’appareil par
vous-même. Une réparation mal faite peut entraîner des dommages et des dysfonctionnements. Contactez un
service technique agréé. Utilisez uniquement des pièces détachées identiques aux pièces d’origine.
• Ne pas exposer vos yeux à la source lumineuse.
• La source lumineuse de cet appareil n’est pas remplaçable. Si elle est défectueuse, l’appareil entier doit être
mis au rebut.
CARACTÉRISTIQUES :
Cet appareil petit et facile à installer peut être amené partout.
• Achage du temps d’utilisation
• Contrôle de température
• Mise au point manuelle
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Manual - LEDSPOT10W
11
www.ibiza-light.com
FUNCTION MENU
Menu Value Description
A 001~512 DMX (6CH) / Master-Slave
Run_
0 Close the light
1 R, G,B, W monochrome jump Change
2 R ON, G, B, W jump Change
3 G ON，R, B, W jump Change
4 B ON，R, G, W jump Change
5 W ON，R, G, B jump Change
6 R, G, B, W gradual change, Low speed
7 R, G, B, W gradual change, High speed
8 R, G gradual change, B, W OFF
9 R, B gradual change, G, W OFF
A B, G gradual change, R, W OFF
b R, G, B, W cross fade
C R, G, B, W Mixed color jump change
Sou_
1 Sound 1
2 Sound 2
3 Sound 3
colr
r000~255 Red Linear control (From dark to bright)
g000~255 Green Linear control (From dark to bright)
b000~255 Blue Linear control (From dark to bright)
y000~255 White Linear control (From dark to bright)
LEon Digital plate ON (Always)
LOFF Digital Plate will OFF Automatically within 3S
MENU: Menu choose; UP: up page; DOWN : down page; ENTER: enter choose
Manual - LEDSPOT10W
12
©Copyright LOTRONIC 2019
DMX CONTROL (A001~512)
CHs Value Function Description
CH1
0~8 Close the light totally
9~134 R, G, B, W from dark to bright, Linear Control
135~239 Strobe, Speed from Slow to Fast
240~255
Combine CH2\CH3\CH4 & CH5, Adjust color’s brightness (red, green,
blue, white)
CH2
0 RED LIGHT OFF
1~255 Red Linear control, from dark to bright
CH3
0 Green LIGHT OFF
1~255 Green Linear control ,from dark to bright
CH4
0 Blue LIGHT OFF
1~255 Blue Linear control ,from dark to bright
CH5
0 White LIGHT OFF
1~255 White Linear control ,from dark to bright
CH6
0~2 1~5CH workable
3~31 R, G, B, W monochrome jump Change
32~63 R ON , G, B, W jump Change
64~79 G ON, R, B, W jump Change
80~95 B ON, R, G, W jump Change
96~111 W ON, R, G, B jump Change
112~143 R, G, B, W gradual change, Low speed
144~159 R, G gradual change, B, W OFF
160~175 R, B gradual change , G, W OFF
176~191 B, G gradual change, R, W OFF
192~207 R, G, B, W cross fade
208~223 R, G, B, W Mixed color jump change
224~239 Sound 1
240~249 Sound 2
250~255 Sound 3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Ibiza Light & Sound LEDSPOT10W Owner's manual

Brand
Ibiza Light & Sound
Model
LEDSPOT10W
Category
Stroboscopes & disco lights
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents