Page is loading ...
Noble
3000 mAh Lithium-Polymer
Battery Flip-Case
Genuine Leather
31 days
Standby
30 hrs
Talk time
30 hrs
Video
5 days
Music
Short-Circuit
Protection
Smart
LED
Over-charge
Protection
Noble is an Apple MFI Certied power case made of genuine leather with a
powerful Lithium-Polymer Battery for iPhone 5/5S, this is an ever lasting
enhancement that every iPhone needs.
The shell, reinforced with transparent plastic, allows a high level of protection
against bumps and scratches. The inner part has been built in soft, anti-slip,
material to avoid any kind of displacement.
The grip, solid and pleasant to touch, gives you a feeling of comfort and
strength. The recharging system is controlled by an easy reachable button
located on the underside of Noble. Just push the button and you can activate
the charging system in which four LEDs allow you to know in every moment of
the day the right amount of energy remaining.
Introduction:
Packaging contents:
• Noble
• Mini-USB Charging Cable
• User Guide
• Warranty Card
Specications
Battery Type: Lithium Polymer Battery
Capacity: 3000 mAh
Input: 5V-1A
Output: 5V-1A
Charging Time: about 4.5 hours
Features:
• Powerful 3000mAh back-up battery case wrapped in genuine leather
• Extend the battery life of your iPhone by 160%
• Hard plastic case to securely hold your iPhone and offer optimum protection
from bumps and scratches
• Interior made of soft, anti-slip material to prevent displacement and protect
your screen from scuffs and scratches.
• Activate or deactivate charging with the push of a button
• Battery indicator to display available power in the battery pack
• Apple MFI certied
Compatibility:
This case is designed to be used only with iPhone 5 or iPhone 5s, please do
not attempt to use this product with any other device.
Precautions
Please read all safety instructions and warnings thoroughly before using this
product. Improper use of this product may result in damage to this or
attached products.
1. Do not disassemble the case or attempt to x it.
2. Kindly use the included Mini-USB Cable and the original iPhone power
adapter to charge the product.
3. Do not attempt to replace any part of this case or battery inside.
4. Do not crush, puncture, dispose of in re, short the contacts or expose the
battery to water or other liquids.
5. Do not store or use the battery in a high temperature environment, including
intense sunlight or heat.
6. Avoid excessive drops, bumps, abrasions and impacts.
7. If there is any reason to believe that there is damage to the battery,
discontinue use immediately.
8. If you nd that the battery is too hot, is emitting and odor is deformed,
punctured or exhibits any suspicious or abnormal behavior, discontinue use
immediately and contact our customer service.
9. Always charge this product before extended storage
Appearance & Interface Description:
Lightning connector
Earphone Jack
Power Button
LED indicator
Mini USB Charging Port
Operation Instructions:
1. Charging Noble without iPhone 5/5s connected
Kindly use the Mini-USB Cable provided to charge your Noble. During the charging
process, the LEDs located on the bottom of Noble will blink to indicate your device
has begun charging. When all the four LEDs light up, Noble is fully charged.
The whole charging process takes around 4.5 hours.
2. Charging Noble with iPhone 5 connected
Connect your iPhone 5/ 5s to Noble and then connect the included Mini-USB Cable
to the charging port at the bottom of Noble. Connect another end of the Mini-USB
Cable to iPhone power adapter or computer Mini-USB port. Your iPhone will now
start charging.
When your iPhone 5/5s is fully charged, the backup battery in Noble automatically
starts getting charged. During the charging process, the LEDs located on the bottom
of the device will blink to indicate your device has begun charging.
When all the four LEDs light up, Noble is fully charged.
3. Charging your iPhone 5/5s using Noble
Plug your iPhone 5 into Noble and press the power button located at the bottom of
Noble. Now your iPhone 5/5s will start charging.
Press and hold the power button for 5-10 seconds until the four LED light indicators
lite up to stop charging your iPhone 5/5s..
Legal
“Made for iPhone,” or “MFI” mean that an electronic accessory has been designed
to connect specically to iPhone respectively, and has been certied by the
developer to meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone, or iPad may aect
wireless performance
/
