KanexPro DVSP8HD Installation guide

Category
Video splitters
Type
Installation guide

KanexPro DVSP8HD is a 1x8 DVI distribution amplifier that enables high-resolution DVI or HDMI signals to be routed to two or more displays. Supporting up to 1920x1080p@60Hz and PC resolutions up to 1920x1200@60Hz, this device is fully EDID and HDCP compliant. The KanexPro DVSP8HD DVI splitter also features gain compensation and equalization to maintain signal integrity with zero jitter effects.

Connect a single-link DVI-D source, such as a computer or Blu-ray player, to the input of the DVSP8HD. Then, connect up to eight DVI displays to the outputs. The DVSP8HD will distribute the input signal to all of the connected displays, providing a clear and consistent image on each one.

KanexPro DVSP8HD is a 1x8 DVI distribution amplifier that enables high-resolution DVI or HDMI signals to be routed to two or more displays. Supporting up to 1920x1080p@60Hz and PC resolutions up to 1920x1200@60Hz, this device is fully EDID and HDCP compliant. The KanexPro DVSP8HD DVI splitter also features gain compensation and equalization to maintain signal integrity with zero jitter effects.

Connect a single-link DVI-D source, such as a computer or Blu-ray player, to the input of the DVSP8HD. Then, connect up to eight DVI displays to the outputs. The DVSP8HD will distribute the input signal to all of the connected displays, providing a clear and consistent image on each one.

1
TM
DVSP8HD
DVI 1x2 Splitter with Full HD 1080p and HDCP Management
2
Table of Contents
01. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
02. Specications . . . . . . . . . . . . . . . . . . . . . . . . . . 3
03. Unit Layout . . . . . . . . . . . . . . . . . . . . . . . . . . 4
04. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notice
KanexPro™ reserves the right to make changes in the hardware, packaging and any accompanying docu-
mentation without prior written notice
1
Introduction
Display up to eight high-resolution outputs with built-in HDCP
e KanexPro 1x8 DVI distribution amplier enables high-resolution DVI or HDMI signals to be
routed to two or more displays. Supporting up to 1920x1080p@60Hz and PC resolutions up to
1920x1200@60Hz, this device is fully EDID and HDCP compliant. e KanexPro 1x8 DVI splitter also
features gain compensation and equalization to maintain signal integrity with zero jitter eects.
Features:
• DistributesinglelinkDVI-Dsignalstotwooutputs
• Supportsdataratesupto10.2Gbps
• SupportsfullHD1080p(1920x1080@60Hz)
• ComputerresolutionuptoWUXGA(1920x1200@60Hz)
• Automaticgaincompensationandequalization
• HDCPCompliant
• Built-inHDCPKeyManagement&Authentication
• EDIDandDDCcompliant
• Front-panelLEDindicator
• SupportsfullcascadingofmultipleDVIsplitters
• Table/Wall-mountablealuminumenclosure
• Universalpoweradaptable,(100Volt~240VoltAC,50/60Hz)
TM
Setup Guide
DVSP8HD
3
2
Specifications
Video Input/output Input: 1 DVI
InputConnector:FemaleDB24+5
InputLevel:T.M.D.S2.9/3.3V
Input Impedance: 50 Ohms
Output: 8 DVI, 4 DVI
OutputConnector:FemaleDB24+5
OutputLevel:T.M.D.S2.9V/3.3V
Output Impedance: 50 Ohms
Video General Gain:0dB
Bandwidth:340MHz(10.2Gbit/s)
VideoSignal:DVI1.0StandardDVI-DFulldigitalT.M.D.S
Signal, HDMI 1.3
MaxTime-delay:5nS(±1nS)
CMRR:>90dB@20Hz~20KHz
Maximum Pixel Clock: 165 MHz
Resolution Range: Up to 1920x1200 or 1080p @ 60 Hz
HDCP: Compliant with High-bandwidth Digital Content
Protection(HDCP)usingDVIandHDMI1.3
Standards
Consumer Electronics Control: Supports CEC wired infrared data pass-
through Using the HDMI 1.3 standard.
General PowerSupply:110VAC~240VAC,50/60Hz
Power Consumption: 10W
OperatingTemperature:-20°C~+70°C
OperatingHumidity:10%~90%
Case Dimensions: W160 x H100 x D44 mm
Product Weight: 0.5Kg
Warranty:Limited1-YearParts&Labor
4
3
Unit Layout
5
Brea,California
KanexPro.com
MPN: DVSP8HD
5
Warranty
A. Limited Warranty
KanexPro™warrantsthat(a)itsproducts(the“Product”)willperformgreatlyinagreementwiththeaccompanyingwrittenmaterialsfora
periodof12months(1fullyear)fromthedateofreceiptand(b)thattheproductwillbefreefromdefectsinmaterialsandworkmanship
under normal use and service for a period of 1 year.
B. CUSTOMER REMEDIES
KanexPros entire liability and Customer’s exclusive remedy shall be, at KanexPro option, either return of the price paid for the product, or
repair or replacement of the Product that does not meet this Limited Warranty and which is returned to KanexPro with a copy of custom-
ers’receipt.isLimitedWarrantyisvoidiffailureoftheProducthasresultedfromaccident,abuse,ormisapplication.Anyreplacement
Product will be warranted for the remainder of the original warranty period of 1 year, whichever is longer.
C. NO OTHER WARRANTIES
TOTHEMAXIMUMEXTENTPERMITTEDBYAPPLICABLELAW,KANEXDISCLAIMSALLOTHERWARRANTIES,
EITHEREXPRESSORIMPLIED,INCLUDING,BUTNOTLIMITEDTOIMPLIEDWARRANTIESOFMERCHANTABILITY
ANDFITNESSFORAPARTICULARPURPOSE,WITHREGARDTOTHEPRODUCTANDANYRELATEDWRITTENMA-
TERIALS.THISLIMITEDWARRANTYGIVESCUSTOMERSSPECIFICLEGALRIGHTS.CUSTOMERSMAYHAVEOTHER
RIGHTSDEPENDINGONTHEJURISDICTION.
D. NO LIABILITY FOR DAMAGES
TOTHEMAXIMUMEXTENTPERMITTEDBYAPPLICABLELAW,INNOEVENTSHALLKANEXBELIABLEFORANY
DAMAGESWHATSOEVER(INCLUDINGWITHOUTLIMITATION,SPECIAL,INCIDENTAL,CONSEQUENTIAL,OR
INDIRECTDAMAGESFORPERSONALINJURY,LOSSOFBUSINESSPROFITS,BUSINESSINTERRRUPTION,LOSSOF
BUSINESSINFORMATION,ORANYOTHERPECUNIARYLOSS)ARISINGOUTOFTHEUSEOFORINABILITYTOUSE
THISPRODUCT,EVENIFKANEXHASBEENADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGES.
TM
HDMI are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Kanex is a trademark of Apogee Inc., registered
in the U.S.
6
TM
Brea, California
KanexPro.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

KanexPro DVSP8HD Installation guide

Category
Video splitters
Type
Installation guide

KanexPro DVSP8HD is a 1x8 DVI distribution amplifier that enables high-resolution DVI or HDMI signals to be routed to two or more displays. Supporting up to 1920x1080p@60Hz and PC resolutions up to 1920x1200@60Hz, this device is fully EDID and HDCP compliant. The KanexPro DVSP8HD DVI splitter also features gain compensation and equalization to maintain signal integrity with zero jitter effects.

Connect a single-link DVI-D source, such as a computer or Blu-ray player, to the input of the DVSP8HD. Then, connect up to eight DVI displays to the outputs. The DVSP8HD will distribute the input signal to all of the connected displays, providing a clear and consistent image on each one.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI