Jeep 2009 Grand Cherokee SRT 8 Owner's manual

VEHICLES SOLD IN CANADA

With respect to any Vehicles Sold in Canada, the name

Chrysler LLC shall be deemed to be deleted and the

name Chrysler Canada Inc. used in substitution therefor.

DRIVING AND ALCOHOL

Drunken driving is one of the most frequent causes of

accidents.

Your driving ability can be seriously impaired with blood

alcohol levels far below the legal minimum. If you are

drinking, don’t drive. Ride with a designated non-drinking

driver, call a cab, a friend, or use public transportation.

WARNING!

Driving after drinking can lead to an accident. Your

perceptions are less sharp, your reflexes are slower,

and your judgment is impaired when you have been

drinking. Never drink and then drive.

This manual illustrates and describes the operation of

features and equipment that are either standard or op-

tional on this vehicle. This manual may also include a

description of features and equipment that are no longer

available or were not ordered on this vehicle. Please

disregard any features and equipment described in this

manual that are not on this vehicle.

Chrysler LLC reserves the right to make changes in

design and specifications, and/or make additions to or

improvements to its products without imposing any

obligation upon itself to install them on products previ-

ously manufactured.

TABLE OF CONTENTS

SECTION PAGE

1

INTRODUCTION

.............................................................3

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

..............................9

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

..............................73

4

UNDERSTANDING YOUR INSTRUMENT PANEL

.................................. 173

5

STARTING AND OPERATING

.................................................273

6

WHAT TO DO IN EMERGENCIES

...............................................339

7

MAINTAINING YOUR VEHICLE

...............................................345

8

MAINTENANCE SCHEDULES

.................................................391

9

IF YOU NEED CONSUMER ASSISTANCE

.........................................407

10

INDEX

....................................................................417

1

2

3

4

5

6

7

8

9

10

INTRODUCTION

CONTENTS

䡵 Introduction ...........................4

䡵 Rollover Warning .......................4

䡵 How To Use This Manual ..................5

䡵 Warnings And Cautions ...................7

䡵 Vehicle Identification Number ..............7

䡵 Vehicle Modifications/Alterations ............8

1

INTRODUCTION

This Owner’s Manual has been prepared with the assis-

tance of service and engineering specialists to acquaint

you with the operation and maintenance of your vehicle.

It is supplemented by a Warranty Information Booklet

and various customer-oriented documents. You are

urged to read these publications carefully. Following the

instructions and recommendations in this manual will

help assure safe and enjoyable operation of your vehicle.

NOTE: After you read the manual, it should be stored

in the vehicle for convenient reference and remain with

the vehicle when sold, so that the new owner will be

aware of all safety warnings.

When it comes to service, remember that your authorized

dealer knows your vehicle best, has the factory-trained

technicians and genuine Mopar威 parts, and is interested

in your satisfaction.

ROLLOVER WARNING

Utility vehicles have a significantly higher rollover rate

than other types of vehicles. This vehicle has a higher

ground clearance and a higher center of gravity than

many passenger cars. It is capable of performing better in

a wide variety of off-road applications. Driven in an

unsafe manner, all vehicles can go out of control. Because

of the higher center of gravity, if this vehicle is out of

control it may roll over when some other vehicles may

not.

Do not attempt sharp turns, abrupt maneuvers, or other

unsafe driving actions that can cause loss of vehicle

control. Failure to operate this vehicle safely may result

in an accident, rollover of the vehicle, and severe or fatal

injury. Drive carefully.

4 INTRODUCTION

Failure to use driver and passenger seat belts provided

is a major cause of severe or fatal injury. In fact, the U.S.

government notes that the universal use of existing seat

belts could cut the highway death toll by 10,000 or more

each year and could reduce disabling injuries by two

million annually. In a rollover crash, an unbelted person

is significantly more likely to die than a person wearing

a seat belt. Always buckle up.

HOW TO USE THIS MANUAL

Consult the Table of Contents to determine which section

contains the information you desire.

The detailed Index at the back of this Owner’s Manual

contains a complete listing of all subjects.

Consult the following table for a description of the

symbols that may be used on your vehicle or throughout

this Owner’s Manual:

Rollover Warning Label

INTRODUCTION 5

1

6 INTRODUCTION

WARNINGS AND CAUTIONS

This Owner’s Manual contains WARNINGS against op-

erating procedures that could result in an accident or

bodily injury. It also contains CAUTIONS against proce-

dures that could result in damage to your vehicle. If you

do not read this entire manual, you may miss important

information. Observe all Warnings and Cautions.

VEHICLE IDENTIFICATION NUMBER

The Vehicle Identification Number (VIN) is found on a

label located on the left front corner of the instrument

panel pad, visible from outside of the vehicle through the

windshield. This number also appears on the Automobile

Information Disclosure Label affixed to a window on

your vehicle. Save this label for a convenient record of

your vehicle identification number and optional equip-

ment.

NOTE: It is illegal to remove the VIN label.

VIN Location

INTRODUCTION 7

1

VEHICLE MODIFICATIONS/ALTERATIONS

WARNING!

Any modifications or alterations to this vehicle could

seriously affect its roadworthiness and safety and

may lead to an accident resulting in serious injury or

death.

8 INTRODUCTION

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

CONTENTS

䡵 A Word About Your Keys ................. 12

▫ Wireless Ignition Node (WIN) ............ 12

▫ Integrated Ignition Key ................. 13

▫ Ignition Key Removal .................. 13

▫ Key-In-Ignition Reminder ............... 15

䡵 Sentry Key威 Immobilizer System ........... 15

▫ Replacement Keys ..................... 16

▫ Customer Key Programming ............. 17

▫ General Information ................... 18

䡵 Vehicle Security Alarm System ............. 18

▫ Rearming The System .................. 18

▫ To Set The Alarm ..................... 18

▫ To Disarm The System ................. 19

䡵 Illuminated Entry ...................... 19

䡵 Remote Keyless Entry ................... 19

▫ To Unlock The Doors .................. 20

▫ To Lock The Doors .................... 21

▫ To Release The Liftgate Flipper Glass ....... 22

2

▫ Express Down Window Feature — If

Equipped ........................... 22

▫ Using The Panic Alarm ................. 22

▫ Programming Additional RKE Transmitters . . . 23

▫ RKE Transmitter Battery Service ........... 23

▫ General Information ................... 24

䡵 Remote Starting System — If Equipped ....... 25

▫ How To Use Remote Start ............... 25

䡵 Door Locks ........................... 27

▫ Manual Door Locks ................... 27

▫ Power Door Locks .................... 28

▫ Passive Entry System — If Equipped ....... 29

▫ To Place An RKE Transmitter In The Vehicle

For Safekeeping – Vehicles Equipped With

Keyless Go Only ...................... 30

▫ Child Protection Door Lock .............. 30

䡵 Windows ............................ 31

▫ Power Windows ...................... 31

▫ Wind Buffeting ....................... 34

䡵 Liftgate ............................. 34

▫ Liftgate Flipper Glass .................. 35

䡵 Occupant Restraints ..................... 36

▫ Lap/Shoulder Belts .................... 37

▫ Lap/Shoulder Belt Operating Instructions .... 38

10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

▫ Adjustable Upper Shoulder Belt Anchorage . . . 42

▫ Automatic Locking Mode — If Equipped .... 42

▫ Energy Management Feature ............. 43

▫ Seat Belt Pretensioners ................. 44

▫ Enhanced Seat Belt Use Reminder System

(BeltAlert威) ......................... 44

▫ Seat Belts And Pregnant Women .......... 46

▫ Seat Belt Extender ..................... 46

▫ Driver And Front Passenger Supplemental

Restraint Systems (SRS) ................. 46

▫ Child Restraints ...................... 58

䡵 Engine Break-In Recommendations .......... 69

䡵 Safety Tips ........................... 69

▫ Exhaust Gas ......................... 69

▫ Safety Checks You Should Make Inside The

Vehicle ............................. 70

▫ Safety Checks You Should Make Outside The

Vehicle ............................. 71

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11

2

A WORD ABOUT YOUR KEYS

Your vehicle uses a keyless ignition system. This system

consists of a Remote Keyless Entry (RKE) transmitter

with integrated ignition key and a Wireless Ignition

Node (WIN) with integral ignition switch. You can insert

the double-sided key into the ignition switch with either

side up.

Keyless Go Feature

This vehicle may be equipped with the Keyless Go

feature, for more information, refer to “Keyless Go — If

Equipped” under “Starting Procedure” in Section 5 of

this manual.

Wireless Ignition Node (WIN)

The Wireless Ignition Node (WIN) operates similar to an

ignition switch. It has four operating positions, three of

which are detented and one spring-loaded. The detented

positions are LOCK, ACC, and ON. The START position

is a spring-loaded momentary contact position. When

released from the START position, the switch automati-

cally returns to the detented ON position.

Wireless Ignition Node (WIN)

1 — LOCK

2 — ACC (ACCESSORY)

3—ON

4 — START

12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Integrated Ignition Key

The integrated ignition key operates the ignition switch.

It also contains the Remote Keyless Entry (RKE) trans-

mitter and a valet key, which stores in the rear of the RKE

transmitter.

The valet key allows for entry into the vehicle should the

battery in the vehicle or the RKE transmitter go dead. The

valet key is also for locking the glove box. You can keep

the valet key with you when valet parking.

To remove the valet key from the RKE transmitter, slide

the mechanical latch at the top of the RKE transmitter

sideways with your thumb and then pull the key out

with your other hand.

NOTE: You can insert the double-sided valet key into

the lock cylinders with either side up.

Ignition Key Removal

Place the shift lever in PARK. Turn the ignition key to the

LOCK position, and remove the key.

Three-Button FOBIK (FOB with Integrated Key)

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13

2

NOTE:

•

If you try to remove the key before you place the shift

lever in PARK, it may become trapped temporarily in

the ignition switch. If this occurs, rotate the key to the

right slightly, then remove the key as described. If a

malfunction occurs, the system will trap the key in the

ignition switch to warn you that this safety feature is

inoperable. The engine can be started and stopped, but

the key cannot be removed until you obtain service.

•

For vehicles equipped with the Electronic Vehicle

Information Center (EVIC), the power window

switches, radio, power sunroof (if equipped), and

power outlets will remain active for up to 60 minutes

after the ignition switch is turned to the LOCK posi-

tion. Opening either front door will cancel this feature.

The time for this feature is programmable. For details,

refer to “Key Off Power Delay,” under “Personal

Settings (Customer-Programmable Features)” under

“Electronic Vehicle Information Center (EVIC)” in

Section 4 of this manual.

WARNING!

Never leave children alone in a vehicle. Leaving

unattended children in a vehicle is dangerous for a

number of reasons. A child or others could be seri-

ously or fatally injured. Do not leave the key in the

ignition. A child could operate power windows,

other controls, or move the vehicle.

CAUTION!

An unlocked car is an invitation to thieves. Always

remove key from the ignition and lock all doors

when leaving the vehicle unattended.

14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Key-In-Ignition Reminder

If you open the driver’s door with the integrated ignition

key in the ignition, a chime will sound to remind you to

remove the key.

NOTE: The Key-In-Ignition reminder only sounds

when the integrated ignition key is placed in the LOCK

or ACC position.

SENTRY KEY姞 IMMOBILIZER SYSTEM

The Sentry Key威 Immobilizer system prevents unautho-

rized vehicle operation by disabling the engine. The

system does not need to be armed or activated. Operation

is automatic, regardless of whether the vehicle is locked

or unlocked.

The system uses the factory-mated Remote Keyless Entry

(RKE) transmitter with integrated key and Wireless Igni-

tion Node (WIN) to prevent unauthorized vehicle opera-

tion. Therefore, only RKE transmitters that are pro-

grammed to the vehicle can be used to start and operate

the vehicle. The system will shut the engine off in two

seconds if an invalid RKE transmitter is used to start the

engine.

After turning the ignition switch to the ON position, the

Vehicle Security Light will turn on for three seconds for a

bulb check. If the light remains on after the bulb check, it

indicates that there is a problem with the electronics. In

addition, if the light begins to flash after the bulb check,

it indicates that someone used an invalid RKE transmitter

to start the engine. Either of these conditions will result in

the engine being shut off after two seconds.

If the Vehicle Security Light turns on during normal

vehicle operation (vehicle running for longer than 10 sec-

onds), it indicates that there is a fault in the electronics.

Should this occur, have the vehicle serviced as soon as

possible.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15

2

NOTE:

•

The Sentry Key威 Immobilizer system is not compatible

with aftermarket remote starting systems. Use of these

systems may result in vehicle starting problems and

loss of security protection.

•

Exxon/Mobil Speedpass™, additional RKE transmit-

ters, or any other transponder-equipped components

on the same key chain will not cause a fault unless the

additional part is physically held against the RKE

transmitter being used to start the vehicle. Cell

phones, pagers, or other RF electronics will not cause

interference with this system.

All of the RKE transmitters provided with your new

vehicle have been programmed to the vehicle electronics.

Replacement Keys

NOTE: Only RKE transmitters that are programmed to

the vehicle electronics can be used to start and operate

the vehicle. Once an RKE transmitter is programmed to a

vehicle, it cannot be programmed to any other vehicle.

CAUTION!

Always remove the keys from the vehicle and lock all

doors when leaving the vehicle unattended.

At the time of purchase, the original owner is provided

with a four-digit Personal Identification Number (PIN).

Keep the PIN in a secure location. This number is

required for authorized dealer replacement of RKE trans-

mitters. Duplication of RKE transmitters may be per-

formed at an authorized dealer or by using the Customer

Key Programming procedure. This procedure consists of

programming a blank transmitter to the vehicle electron-

ics. A blank transmitter is one that has never been

programmed.

16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

NOTE: When having the Sentry Key威 Immobilizer

system serviced, bring all vehicle RKE transmitters with

you to the authorized dealer.

Customer Key Programming

If you have two valid RKE transmitters with integrated

keys, you can program new transmitters to the system by

performing the following procedure:

1. Insert the first valid integrated key into the ignition

switch and turn the ignition switch to the ON position for

at least three seconds, but no longer than 15 seconds.

Turn the ignition switch to the LOCK position and

remove the first key.

2. Insert the second valid integrated key and turn the

ignition switch to the ON position within 15 seconds.

After 10 seconds, a chime will sound and the Vehicle

Security Light will begin to flash. Turn the ignition switch

to the LOCK position and remove the second key.

3. Insert a blank integrated key into the ignition switch

and turn the ignition switch to the ON position within

60 seconds. After 10 seconds, a single chime will sound

and the Vehicle Security Light will stop flashing, turn on

again for three seconds, and then turn off.

The new integrated key is programmed. The RKE trans-

mitter will also be programmed during this procedure.

Repeat this procedure to program up to eight keys. If you

do not have a programmed RKE transmitter with inte-

grated key, contact your authorized dealer for details.

NOTE: If a programmed key is lost, see your authorized

dealer to have all remaining keys erased from the sys-

tem’s memory. This will prevent the lost key from

starting your vehicle. The remaining keys must then be

reprogrammed. All vehicle keys must be taken to an

authorized dealer at the time of service to be

reprogrammed.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17

2

General Information

The Sentry Key威 system complies with FCC rules Part 15

and with RSS-210 of Industry Canada. Operation is

subject to the following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference that may be

received, including interference that may cause undes-

ired operation.

VEHICLE SECURITY ALARM SYSTEM

This Vehicle Security Alarm system monitors the vehicle

doors, liftgate, liftgate flipper glass, and ignition for

unauthorized operation. When the alarm is activated, the

system provides both audible and visible signals. The

horn, headlights, and tail lights will sound/flash repeat-

edly for three minutes. If disturbance is still present

(driver’s door, passenger door, other doors, ignition) after

three minutes, the headlights and tail lights will flash for

an additional 15 minutes.

NOTE: The Panic and Security alarms are quite differ-

ent. Please take a moment to activate the Panic and the

Security modes to hear the differences in the horn. In case

one should go off in the future, you will need to know

which mode has been activated in order to deactivate it.

Rearming The System:

If something triggers the alarm, and no action is taken to

disarm it, the system will turn off the horn after three

minutes, turn off all of the visual signals after 15 minutes,

and then the system will rearm itself.

To Set the Alarm

The alarm will set when you use the Remote Keyless

Entry (RKE) transmitter to lock the doors and liftgate, or

when you use the power door lock switch while the door

is open. After all the doors are locked and closed, the

Vehicle Security Light (located in the instrument cluster)

will flash rapidly for about 16 seconds to signal that the

system is arming. During this 16 second arming period,

18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Page is loading ...

Jeep 2009 Grand Cherokee SRT 8 Owner's manual

This manual is also suitable for

Jeep 2009 Grand Cherokee SRT 8 Owner's manual

Related papers

Other documents