Lightolier FXESR User manual

Lightolier
Brand
Lightolier
Model
FXESR
Type
User manual

Lightolier FXESR: This low profile ring lighting system is designed for use on all Tangent track systems. It can be mounted horizontally or vertically on walls. The fixture features a 365° horizontal rotation and a 0° to 90° vertical adjustment, allowing for precise aiming of the light beam. The GU10 socket is compatible with 120V halogen lamps up to 35W. The fixture also includes a softening lens that diffuses striations and shadows from the lamp while allowing 92% light transmission.

Lightolier FXESR: This low profile ring lighting system is designed for use on all Tangent track systems. It can be mounted horizontally or vertically on walls. The fixture features a 365° horizontal rotation and a 0° to 90° vertical adjustment, allowing for precise aiming of the light beam. The GU10 socket is compatible with 120V halogen lamps up to 35W. The fixture also includes a softening lens that diffuses striations and shadows from the lamp while allowing 92% light transmission.

Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1108
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Tangent
™
Track Lighting System FXESR
Page 1 of 2 120V GU10 Low Profile Ring
3 in
[76 mm]
5 1/4 in
[134 mm]
3 1/4 in
[82 mm]
3
4
7
6
2
1
1/4 in
(6mm)
3/8 in
(10mm)
8
1-1/2 in
1-3/8 in
35mm
1/8 in
(3mm)
2-1/4 in
1-1/16 in
(27mm)
Features
1. Track Attachment fitting: Molded thermoplastic clamping adapter with
captive, nickel-plated steel pin. Clockwise rotation of pin secures fixture
adapter to track.
2. Fixture Stem: Two 1/8" diameter stainless steel rods.
3. Horizontal Pivot: 365° horizontal rotation.
4. Vertical Pivot: 0° to 90° vertical adjustment.
5. Socket: Ceramic GU10 TAL halogen socket.
6. Housing: Plastic socket cup.
7. Softening Lens: Low-iron sodalime glass lens with Solite stippled pattern.
Diffuses striations and shadows from lamp while allowing 92% light
transmission.
8. Diecast Ring
Finish
All Painted finishes are baked enamel.
Accessories
Accessory Holder: Integral
Accessories: Accepts one accessory lens; replaces clear glass shield provided
with fixture.
Lens: AF2 or ADF2 Series
Louver: AL2HC
Ordering Information
Catalog No. Finish Track Mountings Lamps
FXESR
Silver For use on all Tangent Track systems. May be
horizontal or vertical wall mounted.
120V Halogen
GU10 Base
35W Max
Labels
cULus Listed
Dimming
Fixture may be used on a track with a dimmer. Consult dimmer manufacturer for
correct dimmer selection.
Lightolier is a Philips group brand
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1108
Tangent
™
Track Lighting System FXESR
Page 2 of 2 120V GU10 Low Profile Ring
AIMING ANGLE: 0° 30° Horizontal 30° Vertical 45° Vertical
LAMP
D C FC L W
1.5 1.5 75 1.4 0.9
2 2.0 42 1.9 1.3
3 3.0 19 2.8 1.9
4 4.0 11 3.7 2.5
5 2.9 12 3.0 2.6
6 3.5 9 3.6 3.1
7 4.0 6 4.2 3.6
8 4.6 5 4.8 4.1
1.5 2.6 27 3.1 1.3
2 3.5 15 4.2 1.8
3 5.2 7 6.2 2.7
4 6.9 4 8.3 3.5
480 3000
35W Philips
GU10 25˚
D C FC L W
D C FC L W
Beam Spread
CBCP
Rated
(To 50% CBCP) Life (Hrs.)
L Beam length D Distance
W Beam Width A Aiming Angle
C Distance to center beam FC Footcandles
L and W are the outer points where the candle power
drops to 50% of the maximum. FC are the initial foot-
candles at the center of the beam.
Lamp data shown is typical. Consult lamp manufacturers
for availability and performance. CBCP= Center Beam
Candle Power.
5 0.0 19 2.2 2.2
6 0.0 13 2.7 2.7
7 0.0 10 3.1 3.1
8 0.0 8 3.5 3.5
D C FC L W
  • Page 1 1
  • Page 2 2

Lightolier FXESR User manual

Lightolier
Brand
Lightolier
Model
FXESR
Type
User manual

Lightolier FXESR: This low profile ring lighting system is designed for use on all Tangent track systems. It can be mounted horizontally or vertically on walls. The fixture features a 365° horizontal rotation and a 0° to 90° vertical adjustment, allowing for precise aiming of the light beam. The GU10 socket is compatible with 120V halogen lamps up to 35W. The fixture also includes a softening lens that diffuses striations and shadows from the lamp while allowing 92% light transmission.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents