HUSQVARNA-ELECTROLUX ZMB30CST-N User manual

Type
User manual
!
ACCESSORIES
Turntable
Spindle
Turntable Support
Drive Shaft
Turntable installation
1. Place the turntable support on the cavity bottom.Please ensure that
the wheels are in contact with the cavity bottom.
2. Locate the spindle into the drive shaft by passing it through the
centre ring of the turntable support.
3. Place the turntable on top of the turntable support.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

HUSQVARNA-ELECTROLUX ZMB30CST-N User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI