Manual de Studio MediaSuite Operating instructions

Pinnacle Studio MediaSuite

QUICK START GUIDE

GUIDA RAPIDA

MANUAL BREVE DE INSTRUCCIONES

GUIA DE INÍCIO RÁPIDO

GB

I

E

P

41004818

Pinnacle Studio MediaSuite

Quick Start Guide

GB/I/E/P October 2004

No part of this manual may be reproduced or transferred to other media without explicit written

permission from Pinnacle Systems, Braunschweig, Germany.

All brand or product names are trademarks or registered trademarks of their respective holders.

Tutti i diritti sono riservati.

Nessuna parte di questo manuale può essere riprodotta o trasmessa in qualsiasi forma o mezzo senza

la preventiva autorizzazione scritta di Pinnacle Systems, Braunschweig, Germania.

Tutti gli altri nomi di marche e prodotti sono marchi o marchi registrati dei vari produttori.

No se permite reproducir o transferir parte alguna de este manual a otro tipo de soporte sin la

autorización por escrito de Pinnacle Systems, Braunschweig, Alemania.

El resto de denominaciones de marca y de producto son marcas de fábrica o marcas registradas de los

fabricantes correspondientes.

Nenhuma parte deste guia poderá ser copiada ou transferida para outro meio sem a autorização escrita

da Pinnacle Systems, Braunschweig, Alemanha.

Todos os nomes de marcas e produtos são marcas ou marcas registradas de seus respectivos

fabricantes.

Page is loading ...

EnglishEnglishFrançaisEspañolItalianoNederlands

Contents

PINNACLE STUDIO MEDIASUITE 1

WELCOME TO PINNACLE STUDIO MEDIASUITE 1

About this Manual 1

I

NSTALLATION 1

The Installation Steps 2

S

TUDIO MEDIASUITE STARTER 4

Starting the Studio MediaSuite Launcher 4

The Studio MediaSuite Starter window 4

The Studio MediaSuite applications 5

STUDIO MEDIASUITE APPLICATIONS 6

INSTANT DVD RECORDER 6

Starting the Instant DVD Recorder 6

The Direct-to-Disk Wizard 6

M

EDIAMANAGER 11

The MediaManager Main Window 11

The Media Library 12

I

NSTANTDISC 14

The InstantDisc Main Window 14

Creating CDs and DVDs 15

I

NSTANTCOPY 19

Using InstantCopy 19

A closer look at disc copying 20

I

NSTANTBACKUP 22

Starting InstantBackup 22

Back up data 23

Restore data 24

Verify data 24

Creating a label 24

Backup log 24

I

NSTANTWRITE 25

Launching InstantWrite 26

Using InstantWrite 26

I

NSTANTCINEMA 28

Launching InstantCinema 28

InstantCinema Control panel 28

C

OREL PHOTOBOOK 30

W

AVELAB LITE 31

Program settings 31

Quick Start Guide 1

EnglishEnglishFrançaisEspañolItalianoNederlands

Pinnacle Studio MediaSuite

WELCOME TO PINNACLE STUDIO MEDIASUITE

Pinnacle Studio MediaSuite is the most complete solution to edit, mix, enhance, archive

and share multimedia files saved on your PC. It comes with Studio Plus v.9, the most

advanced version of Pinnacle’s award-winning video editing application, complemented

by a powerful suite of applications developped by specialists such as Corel for photo

editing and Steinberg for audio editing.

About this Manual

In this manual you find a detailed description of the installation of the Studio MediaSuite

as well as a short overview of the Studio MediaSuite components.

 Starter

 Instant DVD Recorder

 MediaManager

 InstantDisc

 InstantCopy

 InstantBackup

 InstantWrite

 InstantCinema

 Corel Photobook

 WabeLab Lite

For a detailed description of the different Studio MediaSuite applications, please refer

to the manuals in .pdf format or to the online-help.

*

The Studio Plus software comes with a separate printed manual.

INSTALLATION

This section describes how to install the Studio MediaSuite application software on your

PC.

Studio Plus CD

The Studio Plus software will be installed separately from the Studio Plus installation

CD. For this installation, please refer to the Studio manual!

Studio Bonus Content DVD

With the Studio Bonus Content DVD you can install the tutorial, electronic manual and

bonus content to your hard disc.

Studio MediaSuite CD

In the course of this installation the Instant DVD Recorder, the Media Manager,

InstantDisc, InstantCopy, InstantBackup, InstantWrite, InstantCinema, and WaveLab

Lite will be copied to the hard disk.

*

Some features described in the .pdf manuals are not included in Studio MediaSuite.

2 Pinnacle Studio MediaSuite

EnglishEnglishFrançaisEspañolItalianoNederlands

Corel Photobook CD

In addition Corel Photobook comes on a separate CD and will be installed separately.

During the installation, you will be asked to provide the product serial number(s).

 The serial number for Studio Plus and Studio MediaSuite is the same and is located

on the cover of the Studio Plus CD.

 The serial number for Corel Photobook can be found on the sleeve of the Corel

Photobook CD.

The Installation Steps

 Install the Studio Plus CD.

 Install Studio Bouns Content DVD.

 Install the Studio MediaSuite CD.

 Install the Corel Photobook CD.

For a detailed description of the different installation steps, please refer to the manuals

in .pdf format. In addition, the Studio Plus software comes with a separate printed

manual.

Install Studio Plus

1. Insert the Studio Plus CD.

Insert the Studio Plus CD into your CD-ROM drive. If you have Autorun enabled for

your CD-ROM, Setup will run automatically. If you do not have Autorun enabled,

navigate to your CD-ROM drive, and double-click on Welcome.exe.

2. Follow the on-screen instructions

Follow the installation instructions shown on your screen.

The serial number is located on the cover of the Studio Plus installation CD.

Install Studio Bonus Content DVD

1. Insert the Studio Content DVD into your DVD drive.

If you have Autorun enabled for your DVD drive, Setup will run automatically. If

you do not have Autorun enabled, navigate to your DVD drive, and double-click on

Setup.exe.

If you do not have a DVD drive you may order the tutorial, electronic manual and

bonus content separately on CD ROMs at http://www.pinnaclesys.com/studio9cd.

2. Follow the on-screen instructions

Please follow the on-screen installation instructions.

Quick Start Guide 3

EnglishEnglishFrançaisEspañolItalianoNederlands

Install Studio MediaSuite

1. Insert Studio MediaSuite CD.

Please insert the supplied Studio MediaSuite installation CD into the corresponding

drive of your computer.

The setup program will now start either automatically or you can click on

DiscStart.exe in the setup directory of your CD-ROM.

2. Enter Name, e-mail, and Serial number.

If necessary, enter Name, e-mail address and the Product serial number.

The serial number is the same as for Studio Plus and can be found on the sleeve of the

Studio Plus installation CD.

3. Follow the Assistant’s instructions.

Please follow the Assistant’s instructions shown on your screen.

The Studio MediaSuite components will be copied to your hard disk:

 Instant DVD Recorder

 Instant CD/DVD

 WaveLab Lite

 Pinnacle Media Server / Media Manager.

4. Restart computer.

After the installation has been completed you will be prompted to restart your

computer. For a successful installation of all components it is absolutely necessary

that you restart your computer.

Install Corel Photobook

1. Insert Corel Photobook CD.

Please insert the supplied Corel Photobook installation CD into the corresponding

drive of your computer.

The setup program will now start either automatically or you can click on Setup.exe in

the setup directory of your CD-ROM.

2. Follow on-screen instructions.

Please follow the on-screen installation instructions.

You will find the serial number on the sleeve of the Corel Photobook installation CD.

4 Pinnacle Studio MediaSuite

EnglishEnglishFrançaisEspañolItalianoNederlands

STUDIO MEDIASUITE STARTER

Starting the Studio MediaSuite Launcher

• Start the Launcher by double-clicking the Studio MediaSuite Desktop icon.

—Or—

• Open the Starter application by clicking on the Windows Start menu and selecting

Programs ¾ Studio MediaSuite ¾ Studio MediaSuite.

The Studio MediaSuite Starter window

Welcome to the Studio MediaSuite Starter window.

The Starter window consists of five tabs: Video, Audio, Photo, Data and Tools. From

here you can access every function within the Studio MediaSuite.

Quick Start Guide 5

EnglishEnglishFrançaisEspañolItalianoNederlands

The Studio MediaSuite applications

Seleting the application

Click on the corresponding tab and select the desired application.

Video

Studio Plus

Media Manager

Instant DVD Recorder

InstantCinema

Audio

WaveLab Lite

Media Manager

Photo

Photobook

Media Manager

Data

InstantDisc

InstantCopy

InstantWrite

Backup

Restore

Tools

Home

Support

Settings

6 Pinnacle Studio MediaSuite

EnglishEnglishFrançaisEspañolItalianoNederlands

Studio MediaSuite Applications

INSTANT DVD RECORDER

The Instant DVD Recorder makes it possible for you to quickly and easily burn videos

direct-to-disc, i.e. from your video source directly to a DVD – without complicated

intermediate storage on your hard disk!

You simply have to connect your video source, start Instant DVD Recorder and after just

a few steps your burned DVD will be completed.

Starting the Instant DVD Recorder

The Instant DVD Recorder will be set up on your computer as a separate program group.

You can start the Instant DVD Recorder simply by clicking on the Desktop shortcut or

by using the Start Menu:

1. Open the Windows Start Menu by clicking it with the mouse.

2. Move the cursor to Programs ¾ Studio MediaSuite and Instant DVD Recorder. The

Instant DVD Recorder will be started.

The Direct-to-Disk Wizard

The Start Window

The Start Window of the Direct-to-Disc Wizard opens after the Instant DVD Recorder

has been started.

Quick Start Guide 7

EnglishEnglishFrançaisEspañolItalianoNederlands

Here you can decide whether you want to have the Wizard guide you through the

various settings in an easily understandably way or whether you would prefer to perform

all of the necessary settings directly in Advanced Mode.

We recommend that let the Wizard guide you through the program at the beginning and

only later perform the necessary settings in Advanced Mode after you have become

familiar with the Instant DVD Recorder.

• After you have made your selection click Next. Depending on your selection, you will

now be guided to the next window of the Direct-to-Disc Wizard or to Advanced

Mode.

Selecting a burner and inserting the DVD

If you selected Let the Wizard Guide Me (recommended) option in the Start window of

the Direct-to-Disc Wizard, then the next step will be that the Wizard will guide you to

Select Burner window.

Any DVD burners available on your system that are suitable for recording will be

displayed in the upper section of the window.

• Click Next and the Direct-to-Disc Wizard will guide you to the Select video source

window.

8 Pinnacle Studio MediaSuite

EnglishEnglishFrançaisEspañolItalianoNederlands

Select video source

In this window you can select the video source and prepare it for DVD recording.

Video source device display

The video sources that are available and suitable for recording are displayed in the upper

section of the window.

You can make additional driver settings for your video source device by clicking on

Options. For this please consult the documentation for your video equipment.

• Click Next and the Direct-to-Disc Wizard will guide you to Select menu style

window.

Select menu style

In this window you can decide whether you want to create a menu and thus divide your

DVD into individual chapters or whether you would like to burn your video film to the

DVD as a single movie file with no menu.

If you choose a menu, then this window also provides you with the possibility of

selecting and/or modifying a menu design. In this case a thumbnail of the first scene of

each chapter is shown before a background picture. Later on, when watching the DVD,

you can start the respective scene by selecting a thumbnail.

Quick Start Guide 9

EnglishEnglishFrançaisEspañolItalianoNederlands

• Click Next and the Direct-to-Disc Wizard will guide you to the Start recording

window.

Start recording

In this window you can adjust the recording length and quality as well as start the actual

burning operation.

In the right section of the window you will see the video imported from the video source

in the preview window. This allows you to correct the settings of the video source for

the DVD recording and to follow the video during the recording. The available functions

change depending on the video source.

10 Pinnacle Studio MediaSuite

EnglishEnglishFrançaisEspañolItalianoNederlands

Start recording

In order to start the recording, please click on Start Record The recording begins and the

Start Record button changes into Stop Record. Please note that this operation may take

several minutes.

Stop recording

You can click Stop Record at any time in order to stop the recording before it is

completed.

If problems occur during the DVD recording, then this is indicated by the Instant DVD

Recorder.

Advanced Mode

If you have selected the Go Directly to Advanced Mode option in the Start-up window of

the Direct-to-Disc Wizard, the following window will appear:

This mode gives you the option of performing all the necessary settings quickly and

comfortably on a single screen. In this case, Fields 1 to 4 correspond to the four

windows that you proceed through when using the Direct-to-Disc Wizard.

Quick Start Guide 11

EnglishEnglishFrançaisEspañolItalianoNederlands

MEDIAMANAGER

The Pinnacle MediaManager is installed on your PC so that you can import

 Music files,

 Movies and other video files, and

 Digital photos

to the constantly updated MediaManager Database and then manage and organize them.

You can also create personal playlists – compilations of your favorite songs, movies or

photos that are organized according to your own special criteria. These playlists can also

be exported so that, among other things, you can burn an audio CD.

The MediaManager Main Window

You can launch the Pinnacle MediaManager from the Pinnacle program group in the

Start Menu or by double-clicking the Desktop shortcut. The following window will

open.

12 Pinnacle Studio MediaSuite

EnglishEnglishFrançaisEspañolItalianoNederlands

The window contains the following sections:

 Section 1

The Tools section with the Import, Organize, Playlists and Export tabs, located in the

upper left-hand corner.

 Section 2

The Media Player in the upper right-hand corner.

 Section 3

The Media Library with the Music, Movies and Photos tabs, located in the bottom half

of the window.

 Menu Bar

At the very top of the window is the menu bar, which contains the File, Edit and Help

menus.

The window layout varies depending on what tools and lists you have selected; the three

sections work together closely and interactively.

The Media Library

Media Types

The Media Library displays the contents of the database sorted by media type. It consists

of the

 Music tab

 Movies tab and the

 Photos tab.

Categories

For each media type, you can toggle between the categories listed on the left-hand side.

 Library

Displays all the files in the database.

 Last imported

Displays the most recently imported files. For example, if you import 3 CDs in a row,

you will only see the tracks from the third CD.

 New Media

All the files imported over the past twenty-four hours.

Quick Start Guide 13

EnglishEnglishFrançaisEspañolItalianoNederlands

 Missing Media

The media items displayed here are still existing as entries in the database but the

belonging files are no longer available at their original storage location as they have

been deleted or moved by mistake. These entries are indicated by a corresponding

symbol in the left column of the Media Library. With a right click on the list you can

open the context menu, search for the missing media files and "repair" the broken

links.

 Top rated

Displays the files that have been rated four or five stars by the user. The rating is done

via the context menu of the right column in the list and is indicated by stars.

 Most played

Displays the media files that have been played the most by the user.

 Least played

Displays the media files that have been played least by the user.

 Playlists

Displays all the files in the selected playlist.

The MediaManager's installer copies sample files to your hard drive and automatically

imports them to the database. You can already see these files in their assigned categories

the first time you launch the MediaManager.

Details

The right-hand list displays details on individual files; these details will vary depending

on whether you have selected the Music, Movies or Photos tab/media type. These sorting

criteria are also called tags.

Depending on which media type is selected, you may see the following information: file

status, track/movie/photo name, date created, etc.

If the database does not contain any data on individual tags, the associated columns will

remain empty.

As in Windows Explorer, you can left-click a column header to resort the files in the list.

You can change the order of the columns by left-clicking the column headers and

dragging them to a new location.

Right-clicking a column header will bring up a pop-up menu where you can choose

which columns to display and which not.

14 Pinnacle Studio MediaSuite

EnglishEnglishFrançaisEspañolItalianoNederlands

INSTANTDISC

InstantDisc is a versatile CD and DVD recording pro-gram, which you can use to create

your own CDs and DVDs quickly and easily. To make working with InstantDisc an

intuitive and familiar experience from the outset, the interface has been made as similar

as possible to that of Windows Explorer.

The InstantDisc Main Window

For experienced users, the main window is the place to start for creating new disks,

reading CDs and DVDs, creating labels, editing music and much more.

The window is normally divided into two main areas:

 The upper part is the Projects area; it contains information about your disc creation

projects and the recording hardware installed in the computer.

 The lower part is the Source Files area. It displays the file system of the computer and

can be switched on or off from the View menu.

The left part of both area contains a “tree view”, similar to the Folders panel of

Windows Explorer. You can control the amount of depth displayed in the tree view by

opening and closing (“expanding” and “collapsing”) parts of the “tree”. Entries that

can be expanded are indicated by a symbol to the left of the entry. Click the symbol

to expand the entry.

Quick Start Guide 15

EnglishEnglishFrançaisEspañolItalianoNederlands

Drives and folders can be expanded in the file view in the right-hand panels of the

display in the same manner as in Windows Explorer.

The Projects area is used to obtain access to your stored projects, past and present..

Current projects are located in the “Disc projects” folder, while past projects are stored

under “History”.

Creating CDs and DVDs

To create a new disc project the easy way, begin by opening the Studio MediaSuite

starter application from your Start menu with Program

¾ Studio MediaSuite ¾ Studio

MediaSuite. Select the Data tab and the InstantDisc icon.

You can also choose whether to be guided through the disc creation by the InstantDisc

Assistant, or – if you need capabilities the Assistant doesn’t give you – to work directly

with the controls in the InstantDisc Main window.

Starting a project from the Main window

You can also start a new disc project from the InstantDisc Main window. Either click the

New project button or right-click the Disc projects folder in the Folder tree, and select

the New command from the context menu.

The New Disc Project dialog appears, with (by default) four choices. You can create an

audio CD, a data disc, a mixed-mode disc or an MP3 disc. Check the Use disc creation

wizard option if you would like to use the InstantDisc Assistant when creating the disc.

Creating a data disc

Begin a new data disc using the Studio MediaSuite starter application and the

InstantDisc controls in the main window as described above.

Creating a data disc with the Assistant

If you have requested the aid of the InstantDisc Assistant, it will now appear. Follow the

Assistant's instructions.

16 Pinnacle Studio MediaSuite

EnglishEnglishFrançaisEspañolItalianoNederlands

Creating a data disc without the Assistant

If you are not using the Assistant, InstantDisc opens the Properties dialog for the project.

In principle, it is not necessary to make any entries in the Properties dialog. However, it

is recommended that you should at least name the disc (or accept the default name). The

use you make of the other settings will depend on your particular requirements for the

disc.

After exiting the Properties dialog with the OK button you will be transferred to the

InstantDisc main window.

Now click on the Write button and the data disc will be created.

Quick Start Guide 17

EnglishEnglishFrançaisEspañolItalianoNederlands

Creating an audio CD

Begin a new audio CD using the Studio MediaSuite starter application and the controls

in the main window as described under “Starting a project from the Main window” at the

beginning of this section.

Creating a CD with the Assistant

If you have requested the aid of the InstantDisc Assistant, it will now appear.

The Assistant guides you through the process of creating an audio CD in a series of

simple steps. In the first step, you choose the source for the audio tracks you want to

create:

 Audio files

 An existing CD

 Direct audio input (turntable, microphone, etc.)

No matter which you choose, after you have added tracks from that source to the project,

the Assistant offers three choices of what to do next:

 To proceed with burning the disc immediately (Write disc);

 To add further audio tracks, whether from files, CDs, or direct input (Add additional

audio tracks); or,

 To continue working, but without the Assistant’s help, by switching to the main

InstantDisc window (Close this wizard).

Creating a CD without the Assistant

If you are not using the Assistant, InstantDisc opens the Properties dialog for the project.

The CD-Text tab on this dialog lets you enter information about the disc.

When you close the Properties dialog, you will continue working in the InstantDisc main

window.

Page is loading ...

Manual de Studio MediaSuite Operating instructions

Manual de Studio MediaSuite Operating instructions

in other languages

Other documents