INTRODUCTION
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
™
Wireless 802.11n PCI Card, Model 523981.
This Quick Install Guide presents the rudimentary steps required to
set up and operate this device. For more detailed instructions and
specications, refer to the user manual 1) on the CD enclosed with this
product; 2) on the Web site listed below; or 3) in some cases, printed
and enclosed with this product. Contact your INTELLINET NETWORK
SOLUTIONS dealer with comments or questions.
NOTE: Some of the screen images have been modied to t the format
of this guide.
HARDWARE INSTALLATION
PCI Card
1. Turn off your computer and unplug
the power cord from the AC
outlet.
2. Remove the cover and insert the
card into an empty PCI slot.
3. Replace the cover.
Antennas
1. Connect each of the three
antennas to the card
(turning clockwise).
2. Adjust for optimal signal
reception. TIP: Spread
them into a fan conguration
initially, then adjust if needed.
3